ShopFloorJobs
TTM Technologies logo

Senior Process Engineer

TTM Technologies · Salem, NH

Level
Level: Senior
Team
Team: Process
Degree
Degree: Required
Experience asked
Experience asked: 5+ years
Industry
Industry: Industrial
Posted
Posted: 10 days ago

The role in 30 seconds

A senior process role at TTM Technologies (industrial) in Salem, NH. Develop, document, and improve manufacturing processes, procedures, operating parameters, and process controls.

They ask for
5+ years · degree required
Tools it names
Kaizen, 5S, Root cause, SPC, FMEA, GD&T

Read from the posting. The full description is below.

From the plant jobs report · week of November 16, 2026

Process Engineer roles in New Hampshire: typical posted base $79k–$135k.

Median of the low and high ends of 9 live postings that list pay, out of 16 process engineer openings in New Hampshire, read from manufacturers' own careers sites.

New Hampshire plant jobs report →Pay by team and state →What moves pay →

How this role compares

Against 15 other live process postings in New Hampshire.

Base pay
Not listed in this posting

Typical $79k–$135k, from 9 postings that list pay.

Experience asked
Typical (5+ years)

Similar roles usually ask 5+ years.

Skills these teams ask for most

  • Lean 69%
  • ✓ Root cause 69%
  • Six Sigma 56%
  • ✓ Tooling 56%
  • ✓ SPC 44%
  • MES 38%

✓ = this posting asks for it too. % = share of similar postings that mention it.

Stands out: this posting asks for 5S, GD&T, which few similar roles mention. If you have it, lead with it.

It asks for 5+ years. If you're close, apply anyway: requirements are a wish list. Talk to someone doing this work there first.

At a glance

Pulled from the posting text. If it's not listed here, the posting didn't say.

How to get in at this plant

Five moves over a week or two. The first one takes ten minutes.

  1. 1

    Pick 2–3 people on the Process team at TTM Technologies

    Engineers who joined in the last year or two reply the most. Use the team search on this page to find them.

  2. 2

    Send a short, curious note

    One real question about their work. No favors yet. Each person gets a different note, written for this role.

  3. 3

    Turn a reply into a short call

    Questions worth asking about this team:

    • What does a normal week look like on your team?
    • Is the work mostly new product launches or sustaining existing lines?
    • How much time do you spend on the floor versus at a desk?
    • How did you land the job? What stood out in your interviews?
  4. 4

    Apply with someone vouching for you

    If the call went well, ask whether they’d pass your résumé to the hiring manager. Send your résumé link, apply that day, and let them know.

  5. 5

    Bring proof to the interview

    One page of before-and-after numbers from projects you led: scrap, OEE, cycle time, cost. Plant managers hire on results.

This plant: TTM Technologies in Salem

1 other open role at this site.

Full description from TTM TechnologiesAs posted on their careers site.Show

The Role

The Senior Process Engineer supports manufacturing processes, materials evaluation, and new part introduction used in the design and production of electronic components and assemblies. This role applies engineering expertise to troubleshoot manufacturing issues, optimize processes, evaluate new materials and components, integrate equipment, and maintain product quality and reliability.

Working with Engineering, Quality, Operations, Supply Chain, Program Management, and customers, the Senior Process Engineer leads new part reviews, supports new product introduction (NPI), drives process improvement initiatives, and develops solutions to technical challenges. This position serves as a technical resource within the organization and contributes to manufacturing efficiency, material quality, and continuous improvement.

Responsibilities

  • ◆Lead the technical review and qualification of new parts, components, and raw materials to ensure manufacturability, reliability, and compliance with specifications
  • ◆Evaluate and characterize new and alternative for process compatibility, cost reduction, and performance improvements
  • ◆Troubleshoot manufacturing and material-related issues using engineering principles, data analysis, and root cause investigation
  • ◆Develop, document, and improve manufacturing processes, procedures, operating parameters, and process controls
  • ◆Analyze process performance and test data to improve product quality, yield, efficiency, and reliability
  • ◆Conduct failure analysis, root cause corrective action (8D) and PFMEA to identify risks and implement corrective and preventive actions
  • ◆Lead continuous improvement initiatives, including Kaizen, 5S, and process optimization using statistical techniques
  • ◆Support manual and automated manufacturing processes, equipment integration, and lead Design for Manufacturability (DFM) reviews during new product introduction (NPI)
  • ◆Plan and execute capital equipment projects, including equipment selection, installation, and implementation.
  • ◆Serve as a technical resource for assigned product lines, including supporting process changes and production readiness as the Responsible Engineering Authority (REA).
  • ◆Support advanced manufacturing initiatives, including automation, Industry 4.0, and digital transformation.
  • ◆Provide technical guidance to colleagues and contribute to cross-functional projects and process improvements.
  • ◆Follow applicable company policies and procedures related to safety, quality, and manufacturing operations.
  • ◆Perform other duties and special projects as assigned.

Required Knowledge, Skills, and Abilities

  • ✓Strong understanding of materials science, manufacturing processes, process controls, and sustaining engineering
  • ✓Experience in new part qualification, First Article Inspection (FAI), and Design for Manufacturability (DFM) reviews
  • ✓Knowledge of material characterization techniques and material-driven failure analysis methodologies.
  • ✓Experience with mechanical assembly, tooling, and fixture design.
  • ✓Knowledge of process improvement methodologies, including Statistical Process Control (SPC), Root Cause Analysis, and Design of Experiments (DOE).
  • ✓Proficiency with Microsoft Office, particularly Excel; experience with Minitab, CAD software, and basic programming preferred.
  • ✓Familiarity with Geometric Dimensioning and Tolerancing (GD&T) and advanced manufacturing technologies.
  • ✓Strong analytical, mathematical, problem-solving, and project management skills.
  • ✓Effective communication and collaboration skills, with the ability to manage multiple priorities in a fast-paced manufacturing environment.

Education

  • ✓Bachelor's degree in Ceramic Engineering, Materials Engineering, Electrical Engineering, Mechanical Engineering, Chemical Engineering, or a related engineering discipline required.

Experience

  • ✓Typically requires 5+ years of related engineering experience with a bachelor's degree, 3+ years with a master's degree, or 1+ years with a PhD.
  • ✓Experience in manufacturing process development, materials evaluation, new part qualification, continuous improvement, statistical analysis, and process control preferred.
  • ✓Experience with capital equipment projects, equipment integration, and new product introduction preferred.
  • ✓Experience in high-reliability manufacturing environments preferred.
Show full description ↓

TTM Technologies, Inc. – Publicly Traded US Company, NASDAQ (TTMI) – Top-5 Global Printed Circuit Board Manufacturer

About TTM

TTM Technologies, Inc. is a leading global manufacturer of technology products, including mission systems, radio frequency (“RF”) components, RF microwave/microelectronic assemblies, and technologically advanced printed circuit boards (“PCB”s). TTM stands for time-to-market, representing how TTM's time-critical, one-stop design, engineering and manufacturing services enable customers to reduce the time required to develop new products and bring them to market .

Additional information can be found at www.ttm.com

TTM Technologies, Inc. – Publicly Traded US Company, NASDAQ (TTMI) – Top-5 Global Printed Circuit Board Manufacturer

About TTM

TTM Technologies, Inc. is a leading global manufacturer of technology products, including mission systems, radio frequency (“RF”) components, RF microwave/microelectronic assemblies, and technologically advanced printed circuit boards (“PCB”s). TTM stands for time-to-market, representing how TTM's time-critical, one-stop design, engineering and manufacturing services enable customers to reduce the time required to develop new products and bring them to market .

Additional information can be found at www.ttm.com

Physical Demands and Work Environment

  • •Ability to stand and walk for extended periods, up to 8 hours per day.
  • •Ability to occasionally lift and/or move materials weighing up to 45 pounds.
  • •Ability to work safely in a manufacturing environment.
  • •Ability to wear req

More Process roles nearby