
Quality Engineer - First shift
TTM Technologies · Syracuse, NY
- Level
- Level: Engineer
- Team
- Team: Quality
- Base pay
- Base pay: $76k–$127k
- Degree
- Degree: Required
- Industry
- Industry: Industrial
- Posted
- Posted: 2 days ago
The role in 30 seconds
An engineer-level quality role at TTM Technologies (industrial) in Syracuse, NY. At TTM Technologies, it is not typical for an individual to be hired at or near the top of the range for their role and compensation decisions are dependent on each individual set of circumstances.
- They ask for
- degree required
- Tools it names
- Root cause, SPC, FMEA, Control plans
- Base pay
- $76k–$127k
- Day to day
- some off-shift / weekend coverage
Read from the posting. The full description is below.
From the plant jobs report · week of November 16, 2026
Quality Engineer roles in New York: typical posted base $86k–$126k. This one lists $76k–$127k.
Median of the low and high ends of 39 live postings that list pay, out of 53 quality engineer openings in New York, read from manufacturers' own careers sites.
New York plant jobs report →Pay by team and state →What moves pay →
How this role compares
Against 52 other live quality postings in New York.
- Base pay
- In line with similar roles
- Experience asked
- Not stated
Typical $86k–$126k, from 35 postings that list pay.
Similar roles usually ask 5+ years.
Skills these teams ask for most
- ✓ Root cause 72%
- Six Sigma 53%
- Lean 47%
- Validation (IQ/OQ/PQ) 45%
- Supplier quality 42%
- ✓ FMEA 40%
✓ = this posting asks for it too. % = share of similar postings that mention it.
At a glance
Pulled from the posting text. If it's not listed here, the posting didn't say.
How to get in at this plant
Five moves over a week or two. The first one takes ten minutes.
- 1
Pick 2–3 people on the Quality team at TTM Technologies
Engineers who joined in the last year or two reply the most. Use the team search on this page to find them.
- 2
Send a short, curious note
One real question about their work. No favors yet. Each person gets a different note, written for this role.
- 3
Turn a reply into a short call
Questions worth asking about this team:
- What does a normal week look like on your team?
- Which standards drive the work here: ISO 13485, IATF 16949, AS9100?
- How much of the job is customer complaints versus prevention?
- How does off-shift and weekend coverage work?
- How did you land the job? What stood out in your interviews?
- 4
Apply with someone vouching for you
If the call went well, ask whether they’d pass your résumé to the hiring manager. Send your résumé link, apply that day, and let them know.
- 5
Bring proof to the interview
One page of before-and-after numbers from projects you led: scrap, OEE, cycle time, cost. Plant managers hire on results.
This plant: TTM Technologies in Syracuse
8 other open roles at this site.
- Production Supervisor - 2nd shift · Production · Supervisor
- Mechanical process tech - First shift · Reliability · Technician
- Quality Supervisor · Quality · Supervisor
- Calibration Technician - 1st Shift · Quality · Technician
- Quality Technician - 1st Shift · Quality · Technician
- Process Engineer - 2nd Shift · Process
Full description from TTM TechnologiesAs posted on their careers site.ShowHide
requirements
while driving root cause analysis and continuous improvements. This position is located at 6457 Fly Rd. East Syracuse, NY 13057.
Responsibilities
- ◆Lead root cause analysis (5-Why, Fishbone, 8D) and verify corrective actions
- ◆Support PFMEA, control plan development, and process change evaluations
- ◆Support MRB activities and disposition decisions
- ◆Report and analyze department and corporate KPIs to management
- ◆Acts as the company liaison in planning, communicating, and resolving quality issues with the customer through the RMA process
- ◆Manages the customer complaint process and SCAR responses while driving internal corrective actions related to customer complaints
- ◆Identifies customer
requirements
and provides inspection plans related to their
requirements
- ✓Serve as a resource to departments for problem identification, resolution, and continuous improvement through analysis of yields, scrap, and defect trends using SPC and other quality tools.
- ✓Communicates customer related issues to operations team management team
- ✓Assist manufacturing and engineering in identifying and eliminating root causes of failures
requirements
- ✓Analyze failures and provide diagnosis and remedy to customer
- ✓Conduct training in quality concepts and tools
- ✓Prepare procedures related to the quality function
- ✓Able to perform micro-sectioning and use measurement devices
Education & Experience
- ✓Bachelor’s degree in Engineering required with ASQ certification preferred
- ✓Five years’ experience Quality department, printed circuit board preferred
- ✓Experience with 8D preferred
#ISBU
requirements
for shipments leaving the US; e) manage vendor approvals for ITAR manufacturing and services.
Show full description ↓Show less ↑
TTM Technologies, Inc. – Publicly Traded US Company, NASDAQ (TTMI) – Top-5 Global Printed Circuit Board Manufacturer
About TTM
TTM Technologies, Inc. is a leading global manufacturer of technology products, including mission systems, radio frequency (“RF”) components, RF microwave/microelectronic assemblies, and technologically advanced printed circuit boards (“PCB”s). TTM stands for time-to-market, representing how TTM's time-critical, one-stop design, engineering and manufacturing services enable customers to reduce the time required to develop new products and bring them to market.
Additional information can be found at www.ttm.com
Scope
The Quality Engineer is responsible for assisting in the planning and analysis of products and processes to eliminate future quality issues.
The Quality Engineer is responsible for maintaining and approving product quality throughout the manufacturing process. This role partners closely with production, engineering, and customers to ensure compliance with IPC, customer, and regulatory
Essential Knowledge & Skills
- •Ability to read, write and communicate in English to the degree necessary to perform the job
- •Able to communicate with customers and all levels of operations
- •Able to chair specification review team to effectively create inspection plans related to customer
Export Statement
Must comply with TTM Export Control Policies and Procedures and all applicable laws including ITAR, EAR and OFAC including but not limited to: a) being able to identify ITAR product on the manufacturing floor and understand that access to these products and related technical data is restricted to only US Citizens and US Permanent Residents; b) recognition of Foreign Person visitors by badge differentiation; c) understand and follow authorization procedures for bringing foreign visitors into facilities (VAL); d) understand the Export and ITAR
