Magna Engineered Glass: Level 2 or 3 Process Technician (2nd or 3rd Shift)
Magna · Holland, MI
- Level
- Engineer
- Team
- Process
- Experience asked
- 5+ years
- Industry
- Automotive
- Posted
- 30+ days ago
The role in 30 seconds
An engineer-level process role at Magna (automotive) in Holland, MI.
- They ask for
- 5+ years
- Tools it names
- Robotics, Injection molding, Tooling
Read from the posting. The full description is below.
From the plant jobs report · week of October 19, 2026
Process Engineer roles in Michigan: typical posted base $74k–$130k.
Median of the low and high ends of 12 live postings that list pay, out of 30 process engineer openings in Michigan, read from manufacturers' own careers sites.
Michigan plant jobs report →Pay by team and state →What moves pay →
How this role compares
Against 29 other live process postings in Michigan.
- Base pay
- Not listed in this posting
- Experience asked
- More than usual (5+ vs 3+)
Typical $74k–$130k, from 12 postings that list pay.
Similar roles usually ask 3+ years.
Skills these teams ask for most
- ✓ Tooling 57%
- New product launch 50%
- FMEA 47%
- Lean 43%
- Root cause 43%
- Six Sigma 37%
✓ = this posting asks for it too. % = share of similar postings that mention it.
At a glance
Pulled from the posting text. If it's not listed here, the posting didn't say.
How to get in at this plant
Five moves over a week or two. The first one takes ten minutes.
- 1
Pick 2–3 people on the Process team at Magna
We found 3 people at this company and state: 3 in this kind of role. Engineers who joined in the last year or two reply the most. See them ↓
- 2
Send a short, curious note
One real question about their work. No favors yet. Each person gets a different note, written for this role.
Write to Matt → (free) - 3
Turn a reply into a short call
Questions worth asking about this team:
- What does a normal week look like on your team?
- Is the work mostly new product launches or sustaining existing lines?
- How much time do you spend on the floor versus at a desk?
- How did you land the job? What stood out in your interviews?
- 4
Apply with someone vouching for you
If the call went well, ask whether they’d pass your résumé to the hiring manager. Send your résumé link, apply that day, and let them know.
- 5
Bring proof to the interview
One page of before-and-after numbers from projects you led: scrap, OEE, cycle time, cost. Plant managers hire on results.
This plant: Magna in Holland
9 other open roles at this site · 3 people we found in process roles at Magna.
- Magna Engineered Glass: 2nd Shift Maintenance Tech Level 1 · Reliability
- Magna Engineered Glass: Manufacturing Engineer · Manufacturing
- Engineer- Manufacturing · Manufacturing
- Magna Engineered Glass: Senior Tooling Engineer · Manufacturing · Senior
- Magna Engineered Glass: 2nd Shift Maintenance / Controls Tech · Controls
- Magna Engineered Glass: Quality Supervisor · Quality · Supervisor
Full description from MagnaAs posted on their careers site.ShowHide
responsibilities
as well as a wide range of development prospects. Because we believe that your career path should be as unique as you are.
Responsibilities
One 2nd Shift position open in the South and two 3rd Shift positions in the South. Will be hiring candidates with Level 2-3 experience.
Job summary
As a Manufacturing Process Technician at Magna Engineered Glass, you will provide essential technical support to our production team throughout all manufacturing phases. Your role includes actively participating in continuous improvement initiatives aimed at reducing cycle times and minimizing downtime due to setup, change-overs, processes, and tooling.
Responsibilities
- ◆Performs start-up and shut-down of plastic injection molding machines and ensures that all sub systems (i.e., water, materials, heaters, robots, etc.) are operational.
- ◆Debugs and troubleshoots injection molding process problems for new or existing products to continuously improve part quality and yields.
- ◆Minimize downtime related to die changes and process setup.
- ◆Swiftly respond to issues or concerns raised by the production team.
- ◆Document process adjustments correctly.
- ◆Develop and revise processes for new programs.
- ◆Conduct end-of-arm-tooling setup, troubleshooting, and continuous improvement.
- ◆Handle hazardous waste material responsibly.
- ◆Participate in cleaning and preventive maintenance tasks.
- ◆Contribute to problem-solving and continuous improvement activities.
- ◆Participate as an authorized member of the facility spill response team.
- ◆Maintain compliance with health, safety, and environmental policies and regulations.
While performing the duties of this job, employees are required to
- ◆Frequent verbal communication in a manufacturing environment
- ◆Stand, walk, bend, kneel, stoop, crouch, crawl, and climb throughout the day.
- ◆Frequently lift and/or move items weighing over 50 pounds.
Show full description ↓Show less ↑
Job descriptions may display in multiple languages based on your language selection.
What we offer
At Magna, you can expect an engaging and dynamic environment where you can help to develop industry-leading automotive technologies. We invest in our employees, providing them with the support and resources they need to succeed. As a member of our global team, you can expect exciting, varied
Group Summary
The Magna Exteriors portfolio of products includes access systems such as liftgates, exterior trim, modular systems, front-end modules including fascia, active aerodynamic systems and other lightweight structural components for automotive, commercial truck and other industrial markets.
Recognized globally as an innovator in all aspects of vehicle exteriors, Magna provides everything needed, from materials development and design through manufacturing and assembly, to help automakers create sleek, state-of-the-art vehicles across the world.
Job
Level 1
- •Basic troubleshooting of equipment and processes, including injection molding, dispense systems and assembly fixtures.
- •Primary responsibility for mold changeovers.
- •Take ownership of process documentation
- •Navigate the Human Machine Interface (HMI)
- •Complete preventative maintenance activities as assigned or directed.
- •Familiarity with pneumatic systems and equipment.
Level 2
- •Same as above, plus:
- •Advanced troubleshooting of equipment and processes
- •Develops and documents standardized processes for various operations.
- •Basic repair of manufacturing fixtures and equipment.
- •Basic troubleshooting of vision systems, sensors and robotics.
- •Troubleshoot glass breakage in molding processes.
- •Complete projects with some supervision.
Level 3
- •Same as above, plus:
- •Recommend changes for improved efficiencies to the Engineering department. This includes but is not limited to tool modifications, robotics, and injection molding machine process changes.
- •Conducts and plans tests and experiments which may require minor modifications in equipment setup and/or process parameters.
- •Advanced development of manufacturing processes for new products.
- •Complete projects independently, with minimal supervision.
- •Troubleshoot molding machine hydraulic systems.
- •Interpret mechanical drawings as needed to troubleshoot equipment.
Level 1
- •3-5 years of experience working in a technical role in a manufacturing environment.
- •Ability to troubleshoot, update, and work on equipment and systems in the area of responsibility.
- •Strong interpersonal skills and effective written and verbal communication abilities in English.
Level 2
- •1-2+ years of experience working at Level 1 or a similar role, or a combination of relevant education and experience.
- •Proficiency in injection molding, with preference given to experience with RJG systematic molding.
- •Strong interpersonal and written/verbal communication skills.
- •Ability to work independently and in a team, demonstrating professionalism at all times.
Level 3
- •3-5+ years of experience at Level 2 or a similar role, or a combination of relevant education and experience.
- •Proficiency in ABB Level 1 Robot training.
- •Demonstrated strong teamwork capabilities and excellent professionalism.
- •Proficient project management and problem-solving skills.
- •Ability to set direction and work with minimal supervision.
- •Advanced injection molding skills, with preference given to experience with RJG Advanced Edart and Master Molder 1.