Manufacturing Process Engineer
FuelCell Energy · Torrington, CT
- Level
- Level: Engineer
- Team
- Team: Process
- Base pay
- Base pay: $92k–$115k
- Travel
- Travel: 10%
- Degree
- Degree: Required
- Industry
- Industry: Industrial
- Posted
- Posted: Recently
The role in 30 seconds
An engineer-level process role at FuelCell Energy (industrial) in Torrington, CT. In this role, the Manufacturing Process Engineer serves as a hands-on process expert responsible for developing, implementing, and sustaining manufacturing processes and equipment used in fuel cell production.
- They ask for
- degree required
- Tools it names
- Lean, Six Sigma, Value stream mapping, Root cause, FMEA, Control plans
- Base pay
- $92k–$115k
- Day to day
- about 10% travel
- Openings
- 3 with this title at this site
Read from the posting. The full description is below.
From the plant jobs report · week of November 16, 2026
Process Engineer roles in Connecticut: typical posted base $100k–$150k. This one lists $92k–$115k.
Median of the low and high ends of 10 live postings that list pay, out of 14 process engineer openings in Connecticut, read from manufacturers' own careers sites.
Connecticut plant jobs report →Pay by team and state →What moves pay →
How this role compares
Against 13 other live process postings in Connecticut.
- Base pay
- About 17% below similar roles
- Experience asked
- Not stated
Typical $100k–$150k, from 8 postings that list pay.
Similar roles usually ask 7+ years.
Skills these teams ask for most
- ✓ Root cause 86%
- ✓ FMEA 57%
- ✓ Validation (IQ/OQ/PQ) 57%
- Tooling 50%
- ✓ Six Sigma 50%
- SPC 50%
✓ = this posting asks for it too. % = share of similar postings that mention it.
Stands out: this posting asks for SolidWorks, which few similar roles mention. If you have it, lead with it.
At a glance
Pulled from the posting text. If it's not listed here, the posting didn't say.
How to get in at this plant
Five moves over a week or two. The first one takes ten minutes.
- 1
Pick 2–3 people on the Process team at FuelCell Energy
Engineers who joined in the last year or two reply the most. Use the team search on this page to find them.
- 2
Send a short, curious note
One real question about their work. No favors yet. Each person gets a different note, written for this role.
- 3
Turn a reply into a short call
Questions worth asking about this team:
- What does a normal week look like on your team?
- Is the work mostly new product launches or sustaining existing lines?
- How much time do you spend on the floor versus at a desk?
- The posting says about 10% travel. Between which sites?
- How did you land the job? What stood out in your interviews?
- 4
Apply with someone vouching for you
If the call went well, ask whether they’d pass your résumé to the hiring manager. Send your résumé link, apply that day, and let them know.
- 5
Bring proof to the interview
One page of before-and-after numbers from projects you led: scrap, OEE, cycle time, cost. Plant managers hire on results.
This plant: FuelCell Energy in Torrington
5 other open roles at this site.
- Engineering Technician · Manufacturing
- AWW 1 Weekend Shift Sub Assembly Supervisor · Manufacturing · Supervisor
- Manufacturing Manager Fuel Cell Module Assembly · Manufacturing · Manager
- Instrumentation & Controls Technician · Controls · Technician
- Conditioning Equipment Technician · Manufacturing · Technician
Full description from FuelCell EnergyAs posted on their careers site.ShowHide
Responsibilities
- ◆Support the research, design, development, and implementation of new and improved manufacturing processes and equipment, including value stream mapping, process documentation, PFMEA, risk assessments, and control plans.
- ◆Assist in managing new equipment projects from specification development through installation and release to operations, including vendor coordination, capital justification support, and execution under direction.
- ◆Participate in continuous improvement initiatives focused on cost reduction, quality improvement, yield enhancement, and ergonomic improvements.
- ◆Analyze process data to identify trends, improve yield, and support root cause analysis of production issues.
- ◆Participate on cross‑functional teams including R&D, Facilities, Environmental Health and Safety, and Product Engineering.
- ◆Act as a manufacturing liaison supporting Design Engineering and R&D activities.
- ◆Coordinate and participate in production trials, providing hands-on support and guidance to operators during development and validation activities.
- ◆Review and approve engineering drawings, work instructions, and material specifications within defined authority limits.
- ◆Develop work instructions and operational control plans for shop floor use.
- ◆Support safety assessments of equipment and processes, with working knowledge of NFPA codes and OSHA regulations.
- ◆Perform other duties as assigned by management.
Qualifications
Education: Bachelor’s degree in engineering from an ABET-accredited institution is required. Mechanical, Chemical, Materials Science, or Electrical Engineering is preferred. A Master’s degree is a plus.
Experience : Minimum of three years of experience in manufacturing or process engineering role with exposure to production equipment, assembly, inspection, or industrial processes. Experience with semi-automated assembly systems is preferred.
Skills and Experience
- ✓Demonstrated ability to support process and equipment implementation projects.
- ✓Comfortable working in a dynamic, cross-functional manufacturing environment.
- ✓Practical mechanical aptitude and hands-on problem-solving skills.
- ✓Ability to read and interpret mechanical drawings and specifications.
- ✓Familiarity with Lean and continuous improvement tools such as Six Sigma, PDCA, Gemba walks, and 6S.
- ✓Experience troubleshooting manufacturing equipment and automated machinery preferred.
- ✓Proficiency in Microsoft Office applications.
- ✓Experience with SolidWorks, statistical tools, automation systems, and capital equipment is a plus.
Requirements
- ✓Able to move effectively and timely in and around 200,000+ square foot cement floored manufacturing facility
- ✓Lifting, pushing, pulling and placement of manufacturing parts weighing 25lbs or more.
- ✓Ability to work with, and around, chemicals, including but not limited to nickel-based compounds, adhesives, and solvents.
- ✓Ability to work around furnace area with smoke, dust, and heat (wearing personal protective equipment).
- ✓Be able and willing to wear required personal protective equipment, such as safety glasses, safety shoes, and other PPE as required.
- ✓Must be able to operate a computer keyboard and other office equipment.
- ✓Ability to travel to other company locations as required.
Show full description ↓Show less ↑
Summary
In this role, the Manufacturing Process Engineer serves as a hands-on process expert responsible for developing, implementing, and sustaining manufacturing processes and equipment used in fuel cell production. The role focuses on improving safety, quality, yield, and productivity through disciplined application of engineering principles, structured problem-solving, and close collaboration with Production, Quality, Product Engineering, and R&D teams
Working Environment/Working Conditions
The position is in-person in our Torrington factory and requires a commitment of 40 hours per week minimum, typically Monday through Friday.
Travel is estimated at up to 10% domestically, with limited international travel as needed.
Ability to work in a demanding industrial environment with exposure to chemicals, furnaces, dust, heat, and required PPE
Physical
All Employees Shall
Comply with the EH&S Policy and applicable regulatory and company EH&S rules and requirements.
Report to supervision conditions or practices that are either unsafe or that may adversely impact the environment, to ensure prompt resolution of potential hazards.
Attend scheduled EH&S training program.
Actively support the organization’s efforts to meet or exceed EH&S goals and plans.
Recommend improved EH&S practices.
Must maintain regular and consistent attendance.
This Job Description is to serve as a guide. It is intended to be flexible and will continue to evolve over time with business needs and demands and may be updated periodically and at the Company’s discretion. Nothing in this position description changes or is intended to change the employment at-will relationship with the Company or the terms of any collective bargaining agreement. Employment at-will means that an employee or the Company may terminate the employment relationship at any time, for any reason or no reason at all, with or without notice.
