Engineering Technician
FuelCell Energy · Torrington, CT
- Level
- Level: Engineer
- Team
- Team: Manufacturing
- Travel
- Travel: 5%
- Degree
- Degree: Required
- Industry
- Industry: Industrial
- Posted
- Posted: Recently
The role in 30 seconds
An engineer-level manufacturing role at FuelCell Energy (industrial) in Torrington, CT. Collect, organize, and analyze production and equipment data to support technical decisions.
- They ask for
- degree required
- Tools it names
- Root cause, Validation (IQ/OQ/PQ), Robotics, Automation, Machining, Welding
- Day to day
- about 5% travel
Read from the posting. The full description is below.
From the plant jobs report · week of November 16, 2026
Manufacturing Engineer roles in Connecticut: typical posted base $86k–$137k.
Median of the low and high ends of 16 live postings that list pay, out of 38 manufacturing engineer openings in Connecticut, read from manufacturers' own careers sites.
Connecticut plant jobs report →Pay by team and state →What moves pay →
How this role compares
Against 37 other live manufacturing postings in Connecticut.
- Base pay
- Not listed in this posting
- Experience asked
- Not stated
Typical $86k–$137k, from 16 postings that list pay.
Similar roles usually ask 7+ years.
Skills these teams ask for most
- ✓ Tooling 53%
- ✓ Root cause 53%
- Lean 50%
- Six Sigma 39%
- ✓ Validation (IQ/OQ/PQ) 32%
- Cost reduction 29%
✓ = this posting asks for it too. % = share of similar postings that mention it.
Stands out: this posting asks for Welding, Time studies, which few similar roles mention. If you have it, lead with it.
At a glance
Pulled from the posting text. If it's not listed here, the posting didn't say.
How to get in at this plant
Five moves over a week or two. The first one takes ten minutes.
- 1
Pick 2–3 people on the Manufacturing team at FuelCell Energy
Engineers who joined in the last year or two reply the most. Use the team search on this page to find them.
- 2
Send a short, curious note
One real question about their work. No favors yet. Each person gets a different note, written for this role.
- 3
Turn a reply into a short call
Questions worth asking about this team:
- What does a normal week look like on your team?
- Is the work mostly new product launches or sustaining existing lines?
- How much time do you spend on the floor versus at a desk?
- The posting says about 5% travel. Between which sites?
- How did you land the job? What stood out in your interviews?
- 4
Apply with someone vouching for you
If the call went well, ask whether they’d pass your résumé to the hiring manager. Send your résumé link, apply that day, and let them know.
- 5
Bring proof to the interview
One page of before-and-after numbers from projects you led: scrap, OEE, cycle time, cost. Plant managers hire on results.
This plant: FuelCell Energy in Torrington
5 other open roles at this site.
- Manufacturing Process Engineer · Process
- AWW 1 Weekend Shift Sub Assembly Supervisor · Manufacturing · Supervisor
- Manufacturing Manager Fuel Cell Module Assembly · Manufacturing · Manager
- Instrumentation & Controls Technician · Controls · Technician
- Conditioning Equipment Technician · Manufacturing · Technician
Full description from FuelCell EnergyAs posted on their careers site.ShowHide
Required Skills & Experience
- ✓Strong mechanical aptitude and demonstrated hands-on technical ability.
- ✓Strong troubleshooting, analytical, and problem-solving skills.
- ✓Ability to safely use hand tools, power tools, measuring equipment, and ot
Show full description ↓Show less ↑
FuelCell Energy is redefining how the world produces and uses power. As a leading clean energy technology company, we're helping businesses, communities, utilities, and data centers meet growing energy demands with reliable, always-on power solutions.
With nearly a gigawatt of fuel cell platforms deployed worldwide, we're accelerating the transition to a more resilient energy future. Join a team of innovators, problem-solvers, and industry pioneers who are tackling some of the world's most complex energy challenges while shaping the next generation of sustainable power.
Your work here won't just power facilities. It will help power the future.
The pay for this position ranges from $27.50 - $27.50.
Summary
The Engineering Technician is a skilled technical position within Production Engineering responsible for supporting, troubleshooting, improving, and developing manufacturing equipment and processes.
Working closely with Production Engineers and cross-functional teams, the Engineering Technician provides hands-on technical support for automated and semi-automated manufacturing equipment, fabrication, assembly, testing, and process-improvement activities.
The role serves as a technical bridge between production operations and engineering. Engineering Technicians are expected to develop increasing capability in equipment troubleshooting, automation and robotics, mechanical systems, fabrication, data analysis, and process improvement. As proficiency increases, Engineering Technicians take greater ownership of technical problems, equipment improvements, and engineering projects.
Production & Technical Support
- •Provide hands-on technical support for manufacturing equipment, processes, tooling, fixtures, and production systems.
- •Troubleshoot mechanical, electrical, pneumatic, robotic, automated, and semi-automated manufacturing equipment within demonstrated competency.
- •Diagnose equipment and process problems, identify potential root causes, and assist with implementation of corrective actions.
- •Support equipment recovery and production troubleshooting while maintaining established safety, quality, and engineering requirements.
- •Monitor manufacturing processes and identify opportunities to improve safety, quality, cost, capacity, reliability, and yield.
- •Assist Production Engineering with implementation and validation of process changes.
Automation & Robotics
- •Support troubleshooting and recovery of automated manufacturing equipment and robotic systems.
- •Develop capability to perform approved robot touch-ups and make adjustments within established engineering and process limits.
- •Support Production Engineers with robotic programming, equipment optimization, tooling changes, and process modifications based on demonstrated competency.
- •Document changes made to automated equipment and processes in accordance with applicable procedures.
Fabrication, Assembly & Testing
- •Read and interpret engineering drawings, sketches, specifications, and technical instructions.
- •Fabricate, assemble, modify, and test mechanical assemblies, fixtures, tooling, prototypes, and test equipment.
- •Safely utilize hand tools, power tools, measuring equipment, and appropriate fabrication equipment.
- •Support welding, machining, and fabrication activities based on training and demonstrated competency.
- •Work with machinists, welders, operators, engineers, and other technical personnel to implement engineering changes and equipment improvements.
Process Improvement & Engineering Support
- •Participate in continuous-improvement and problem-solving activities.
- •Collect, organize, and analyze production and equipment data to support technical decisions.
- •Utilize appropriate statistical and problem-solving methods when evaluating process performance and proposed changes.
- •Conduct time studies and process observations to identify opportunities for improved manufacturing efficiency.
- •Support trials, process-development activities, equipment qualifications, and implementation of engineering changes.
- •Document technical findings, equipment conditions, test results, process changes, and lessons learned.
- •Create or assist with work instructions, troubleshooting documentation, process documentation, and equipment-related procedures.
Project Support
- •Support Production Engineers with equipment modifications, manufacturing improvements, new equipment installations, and capital projects.
- •Independently execute assigned technical tasks and projects appropriate to demonstrated skill level.
- •At higher levels within the Engineering Technician progression, take increasing responsibility for planning and completing equipment, capital, and process-improvement projects.
General
- •Exercise good judgment and initiative while providing a high level of workmanship to achieve results. Work independently to the extent practical and collaborate as needed if uncertain how to perform a task.
- •Perform other duties and tasks as directed by Management
Education & Work Experience : Associate degree or technical certificate in Engineering Technology, Advanced Manufacturing, Automation, Robotics, Machining, Mechatronics, Electrical Technology, or a related technical discipline, with relevant hands-on industrial experience; or a High School Diploma/GED with significant demonstrated technical manufacturing experience. Equivalent combinations of education, technical training, certifications, and applicable industrial experience will be considered.
