ShopFloorJobs
FE

Manufacturing Manager Fuel Cell Module Assembly

FuelCell Energy · Torrington, CT

Level
Level: Manager
Team
Team: Manufacturing
Experience asked
Experience asked: 7+ years
Certification
Certification: Black Belt preferred
Industry
Industry: Industrial
Posted
Posted: Recently

The role in 30 seconds

A management manufacturing role at FuelCell Energy (industrial) in Torrington, CT.

They ask for
7+ years · Black Belt preferred
Tools it names
Kaizen, 5S, Value stream mapping, OEE, Root cause, CAPA
Day to day
some off-shift / weekend coverage

Read from the posting. The full description is below.

From the plant jobs report · week of November 16, 2026

Manufacturing Engineer roles in Connecticut: typical posted base $86k–$137k.

Median of the low and high ends of 16 live postings that list pay, out of 38 manufacturing engineer openings in Connecticut, read from manufacturers' own careers sites.

Connecticut plant jobs report →Pay by team and state →What moves pay →

How this role compares

Against 37 other live manufacturing postings in Connecticut.

Base pay
Not listed in this posting

Typical $86k–$137k, from 16 postings that list pay.

Experience asked
More than usual (7+ vs 5+)

Similar roles usually ask 5+ years.

Skills these teams ask for most

  • Tooling 53%
  • ✓ Root cause 53%
  • Lean 50%
  • Six Sigma 39%
  • Validation (IQ/OQ/PQ) 32%
  • ✓ Cost reduction 29%

✓ = this posting asks for it too. % = share of similar postings that mention it.

Stands out: this posting asks for CAPA, Internal audits, Assembly lines, EHS / safety, which few similar roles mention. If you have it, lead with it.

It asks for 7+ years. If you're close, apply anyway: requirements are a wish list. Talk to someone doing this work there first.

At a glance

Off-shift / weekend coveragePromotion path mentioned

Pulled from the posting text. If it's not listed here, the posting didn't say.

How to get in at this plant

Five moves over a week or two. The first one takes ten minutes.

  1. 1

    Pick 2–3 people on the Manufacturing team at FuelCell Energy

    Engineers who joined in the last year or two reply the most. Use the team search on this page to find them.

  2. 2

    Send a short, curious note

    One real question about their work. No favors yet. Each person gets a different note, written for this role.

  3. 3

    Turn a reply into a short call

    Questions worth asking about this team:

    • What does a normal week look like on your team?
    • Is the work mostly new product launches or sustaining existing lines?
    • How much time do you spend on the floor versus at a desk?
    • How does off-shift and weekend coverage work?
    • The posting mentions a Black Belt. Does the company sponsor certification?
  4. 4

    Apply with someone vouching for you

    If the call went well, ask whether they’d pass your résumé to the hiring manager. Send your résumé link, apply that day, and let them know.

  5. 5

    Bring proof to the interview

    One page of before-and-after numbers from projects you led: scrap, OEE, cycle time, cost. Plant managers hire on results.

This plant: FuelCell Energy in Torrington

5 other open roles at this site.

Full description from FuelCell EnergyAs posted on their careers site.Show

qualifications

into production with minimal disruption to existing output commitments.

  • ✓Collaborate with Maintenance to manage planned preventive maintenance (PM) windows and prioritize response to unplanned equipment failures that impact production.
  • ✓Interface with Program Management and Customer Service teams to communicate production status, flag risks to committed delivery dates, and provide realistic recovery timelines when needed.
  • ✓Support new product introduction (NPI) and the engineering change orders (ECO) in module assembly, ensuring lessons learned are captured and incorporated into standard work.
Show full description ↓

Summary

The Manufacturing Manager, Fuel Cell Module Assembly is a critical operational leadership role responsible for module production in a 24/7 manufacturing environment. This individual directly manages all Shift Supervisors across day, evening, and night shifts and is accountable for meeting production targets, controlling production costs, and maintaining rigorous quality standards throughout the final assembly process. The Manufacturing Manager serves as the primary operational bridge between shop floor execution and senior leadership, translating strategic production goals into daily shift-level action.

Production & Output Management

  • •Own the daily, weekly, and monthly production output plan for fuel cell module final assembly; ensure shift targets and schedule attainment goals are consistently met or exceeded.
  • •Monitor and manage throughput across all assembly stages; primarily focusing on module fabrication and stack integration.
  • •Develop and maintain production capacity models and staffing plans that account for preventative maintenance, shift transitions, and production ramps in a 24/7 operating model.
  • •Drive continuous improvement initiatives in cycle time, line efficiency, and overall equipment effectiveness (OEE) using structured methodologies (Kaizen, VSM, 5S, PDCA).
  • •Partner with Planning and Supply Chain to align production schedules with material availability.

Shift Supervision & People Leadership

  • •Directly manage all Shift Supervisors; provide clear direction, performance expectations, and ongoing coaching to build a high-performing supervisory team.
  • •Conduct regular one-on-ones and shift overlap meetings to ensure continuity of operations, communication of priorities, and effective shift handoffs with no loss of production time.
  • •Lead the hiring, onboarding, and development of Shift Supervisors in partnership with HR; establish career development paths and succession planning within the team.
  • •Foster a culture grounded in accountability, transparency, and respect; maintain a coaching-first leadership approach.
  • •Administer performance management processes including goal-setting, performance reviews, corrective action, and recognition programs for all direct and indirect reports.
  • •Manage shift staffing levels, time and attendance, and overtime allocation in compliance with company policy and labor agreements.

Quality Assurance & Compliance

  • •Serve as owner for all quality metrics within module assembly, including first-pass yield (FPY), defect rates, nonconformance reports (NCRs), and corrective/preventive action (CAPA) closure rates.
  • •Partner with Quality Engineering to investigate NCRs, lead root cause analysis (RCA) using structured tools (8D, Ishikawa, 5-Why), and implement sustainable corrective actions at the process level.
  • •Ensure application of standardized work, assembly procedures, and inspection protocols across all shifts; own the review and update cadence for all relevant work instructions.
  • •Support internal audits, customer source inspections, and third-party quality assessments; drive readiness and follow-up action closure.
  • •Champion quality culture on the shop floor.

Cost Management & Metric Reporting

  • •Own and report on the manufacturing cost structure for module assembly operations, including direct labor, consumables, rework costs, scrap costs, and overhead allocation.
  • •Prepare and present a regular manufacturing performance dashboard to senior leadership covering output rate, cost per unit, quality metrics, and shift efficiency.
  • •Support the organizations’ cost optimization efforts by identifying and executing on cost reduction initiatives through labor efficiency gains, waste elimination, and process optimization.
  • •Develop and manage the module assembly operating budget; flag variances proactively and provide data-driven recommendations for course correction.

EH&S and Regulatory Compliance

  • •Ensure all module assembly operations are conducted in full compliance with applicable EH&S regulations, including OSHA standards relevant to high-voltage testing, pressure systems, and chemical handling associated with fuel cell manufacturing.
  • •Lead incident investigation and near-miss reporting; ensure timely corrective action and communication to the broader team without a culture of blame.
  • •Enforce and model safe work practices on the floor; integrate EH&S ownership into Shift Supervisor accountabilities and hourly operator training.

Cross-Functional Collaboration

  • •Work closely with Manufacturing Engineering to introduce new products, process changes, and equipment

Key Performance Indicators

  • •Production Rate; Weekly & monthly run rates
  • •First-Pass Yield (FPY); Scrap and rework costs
  • •Non-Conformances: Quantity, cost, and corrective action plan (CAP) closure per schedule
  • •Cost Per Unit (direct labor + materials) vs. standard
  • •OEE (Availability x Performance x Quality) for final assembly
  • •EH&S in Module Assembly; recordables and near-misses
  • •Headcount vs. plan and overtime percentage of

More Manufacturing roles nearby