
Manufacturing Engineer II
Crane · Burbank, CA
- Level
- Level: Engineer
- Team
- Team: Manufacturing
- Base pay
- Base pay: $104k–$123k
- Degree
- Degree: Required
- Experience asked
- Experience asked: 2+ years
- Industry
- Industry: Aerospace & defense
- Posted
- Posted: 5 days ago
The role in 30 seconds
An engineer-level manufacturing role at Crane (aerospace & defense) in Burbank, CA. Investigate, recommend, and implement manufacturing cost reduction and product improvement programs.
- They ask for
- 2+ years · degree required
- Tools it names
- Lean, Root cause, Tooling
- Base pay
- $104k–$123k
- Day to day
- some off-shift / weekend coverage
Read from the posting. The full description is below.
From the plant jobs report · week of November 16, 2026
Manufacturing Engineer roles in California: typical posted base $115k–$173k. This one lists $104k–$123k.
Median of the low and high ends of 195 live postings that list pay, out of 492 manufacturing engineer openings in California, read from manufacturers' own careers sites.
California plant jobs report →Pay by team and state →What moves pay →
How this role compares
Against 491 other live manufacturing postings in California.
- Base pay
- About 18% below similar roles
- Experience asked
- Less than usual (2+ vs 5+)
Typical $110k–$165k, from 172 postings that list pay.
Similar roles usually ask 5+ years.
Skills these teams ask for most
- ✓ Tooling 50%
- New product launch 43%
- ✓ Root cause 38%
- Automation 33%
- ✓ Lean 28%
- Validation (IQ/OQ/PQ) 27%
✓ = this posting asks for it too. % = share of similar postings that mention it.
At a glance
Pulled from the posting text. If it's not listed here, the posting didn't say.
How to get in at this plant
Five moves over a week or two. The first one takes ten minutes.
- 1
Pick 2–3 people on the Manufacturing team at Crane
We found 3 people at this company and state: 3 in this kind of role. Engineers who joined in the last year or two reply the most. See them ↓
- 2
Send a short, curious note
One real question about their work. No favors yet. Each person gets a different note, written for this role.
Write to Alexander → (free) - 3
Turn a reply into a short call
Questions worth asking about this team:
- What does a normal week look like on your team?
- Is the work mostly new product launches or sustaining existing lines?
- How much time do you spend on the floor versus at a desk?
- How does off-shift and weekend coverage work?
- How did you land the job? What stood out in your interviews?
- 4
Apply with someone vouching for you
If the call went well, ask whether they’d pass your résumé to the hiring manager. Send your résumé link, apply that day, and let them know.
- 5
Bring proof to the interview
One page of before-and-after numbers from projects you led: scrap, OEE, cycle time, cost. Plant managers hire on results.
This plant: Crane in Burbank
10 other open roles at this site · 3 people we found in manufacturing roles at Crane.
- Manufacturing Engineer I · Manufacturing
- Operations Manager · Production · Manager
- Maintenance Mechanic (Temporary/Contract) · Reliability · Technician
- Quality Specialist – Mechanical Inspection (First Shift) · Quality · Technician
- Manufacturing Engineer III · Manufacturing · Senior
- Production Supervisor I · Production · Supervisor
Manufacturing Engineer II at Crane in other locations
Crane lists this title in 2 places. Pick the plant you can get to.
- Lynnwood, WA · $100k–$117k
Full description from CraneAs posted on their careers site.ShowHide
Job Summary
The Manufacturing Engineer II performs independent assignments to develop and recommend improvements in the Manufacturing system and in product manufacturability and cost effectiveness.
- ◆Study, analyze and design methods, procedures, processes, layouts, flow, fixtures and tooling as needed to support production
- ◆Investigate, recommend, and implement manufacturing cost reduction and product improvement programs
- ◆Identify root cause and corrective actions for manufacturing problems
- ◆Participate in customer specification and statement of work reviews
- ◆Participate in the review and evaluation of new product designs or design changes
- ◆Review and analyze design change requests initiated by manufacturing personnel to determine feasibility, validity, savings, effect on design, and to verify justification for change
- ◆Evaluate, test and select facilities, equipment and materials required for production in conjunction with Production Supervisors, Purchasing and other groups
- ◆Perform a variety of cost analyses, e.g., cost estimates for quotations or "make or buy" decisions
- ◆Develop manufacturing operating instructions
- ◆Develop and track manufacturing metrics to monitor the health of processes
- ◆Evaluate non-conformances as part of the Material Review Board
- ◆Direct work activities of production operators to aid in problem solving
- ◆Develop procedures and train assemblers and operators in machine operations, processes or assembly applications
- ◆Coordinate with vendors and customers
- ◆Identify and prioritize work with limited input from manager
- ◆Develop ROI or business case and present to management in the support of capital equipment, new product or process development and productivity improvements
- ◆Any other task assigned by supervisor or management
Eligibility Requireme nt: This position may require access to Controlled Data or Information. Where the position requires such access only US Persons will be considered. As a US Department of Defense contractor, we are bound by International Traffic in Arms Regulations (ITAR).
Qualifications
- ✓Experience : 2+ years of experience as a Manufacturing Engineer
- ✓Knowledge : Practical application knowledge of the theories of modern production principles and methods as applied to a high technology electronics design and manufacturing operation; Basic knowledge of material characteristics and processing, chemicals; Basic concepts of electrical systems, mechanical systems, fluids, and heat transfer
- ✓Skills/Abilities : Able to effectively communicate with employees at all levels of the organization
- ✓Education/Certification : BA or BS degree in Mechanical Engineering, Electrical Engineering, Chemical Engineering, Material Science or related field
Preferred Qualifications
- ✓Experience in a regulated manufacturing environment
Education Reimbursement: eligible after 6 months of employment
You can see a list of our benefits at https://www.craneae.com/company/careers or visit our website at www.CraneAE.com for more information on our company and great opportunities.
We are committed to operational excellence and world class processes. We employ Lean manufacturing techniques to optimize manufacturing efficiency and accuracy on all product lines. Our products are known for their technical strength, proven reliability and overall value.
In our efforts to maintain a safe and drug-free workplace, Crane Aerospace & Electronics requires that candidates complete a satisfactory background check. FAA sensitive positions require employees to participate in a random drug test pool.
Show full description ↓Show less ↑
Crane Aerospace and Electronics has an exciting opportunity for a Manufacruring Engineer II at our Burbank, CA location.
About Crane
Crane Aerospace & Electronics supplies critical systems and components to the aerospace and defense markets. You’ll find Crane Aerospace & Electronics in some of the toughest environments: from engines to landing gear; from satellites to medical implants and from missiles to unmanned aerial systems (UAS).
Every 1.2 seconds, product built at our Crane Aerospace & Electronics Burbank facility is stopping aircraft – delivering passengers and military personnel safely to their destination. Home to our Landing & Cabin Systems team, Crane A&E’s brake control systems and premium cabin actuation solutions are flying on tens of thousands of aircraft throughout the world. You’ll join a business with a long track record of engineering excellence, set in the wonderful town of Burbank filled with great community atmosphere, schools, weather and no shortage of entertainment. Start the next chapter of your career with Crane Aerospace & Electronics!
Working Conditions
- •Working conditions are normal for a manufacturing environment
- •Manufacturing operations may require the use of safety equipment to include but not limited to eye safety glasses, gowning, masks, hearing protectors, heel/wrist straps and any other required PPE
- •May be exposed to unusual environmental conditions such as loud noises, cold temperatures, confined spaces, dust or fumes
- •Must be available to work overtime, as needed
- •Flexible work schedule to support production
Standing: up to 100% *percentage is approximate and may vary depending on work task
Sitting: up to 75% *percentage is approximate and may vary depending on work task
Lifting (in pounds): up to 25 pounds
Pushing (in pounds): up to 50 pounds
Mental/Visual: use of microscope and computer
Workspace: cubicle/desk
As a team member at Crane Aerospace and Electronics, you’ll enjoy
Benefits: Health care, dental, vision, life and disability insurance starting the first day of the month
Time Off: 15 days of paid time off that start accruing your first day at Crane and 12 paid holidays per year.
401k Retirement Plan: 401k plan with company match
