ShopFloorJobs
KI

Quality Engineer-New Product Introduction

Koch Industries · Lisle, IL

Level
Level: Engineer
Team
Team: Quality
Base pay
Base pay: $90k–$110k
Degree
Degree: Required
Experience asked
Experience asked: 1+ years
Industry
Industry: Industrial
Posted
Posted: Recently

The role in 30 seconds

An engineer-level quality role at Koch Industries (industrial) in Lisle, IL. New Product Introduction (NPI), you will partner closely with cross-functional Product Development teams—including Product Design, Manufacturing Integration, Process Engineering, Supplier Quality, and Operations—to drive flawless product launches.

They ask for
1+ years · degree required
Tools it names
Lean, Six Sigma, Root cause, FMEA, Control plans, MSA / Gage R&R
Base pay
$90k–$110k

Read from the posting. The full description is below.

From the plant jobs report · week of November 16, 2026

Quality Engineer roles in Illinois: typical posted base $98k–$132k. This one lists $90k–$110k.

Median of the low and high ends of 63 live postings that list pay, out of 90 quality engineer openings in Illinois, read from manufacturers' own careers sites.

Illinois plant jobs report →Pay by team and state →What moves pay →

How this role compares

Against 89 other live quality postings in Illinois.

Base pay
About 5% below similar roles

Typical $89k–$122k, from 47 postings that list pay.

Experience asked
Less than usual (1+ vs 5+)

Similar roles usually ask 5+ years.

Skills these teams ask for most

  • ✓ Root cause 49%
  • ✓ Supplier quality 41%
  • ✓ Validation (IQ/OQ/PQ) 39%
  • FDA / GMP 36%
  • SPC 33%
  • ✓ FMEA 31%

✓ = this posting asks for it too. % = share of similar postings that mention it.

Stands out: this posting asks for Minitab, Tooling, which few similar roles mention. If you have it, lead with it.

It asks for 1+ years. If you're close, apply anyway: requirements are a wish list. Talk to someone doing this work there first.

At a glance

Pulled from the posting text. If it's not listed here, the posting didn't say.

How to get in at this plant

Five moves over a week or two. The first one takes ten minutes.

  1. 1

    Pick 2–3 people on the Quality team at Koch Industries

    Engineers who joined in the last year or two reply the most. Use the team search on this page to find them.

  2. 2

    Send a short, curious note

    One real question about their work. No favors yet. Each person gets a different note, written for this role.

  3. 3

    Turn a reply into a short call

    Questions worth asking about this team:

    • What does a normal week look like on your team?
    • Which standards drive the work here: ISO 13485, IATF 16949, AS9100?
    • How much of the job is customer complaints versus prevention?
    • How did you land the job? What stood out in your interviews?
  4. 4

    Apply with someone vouching for you

    If the call went well, ask whether they’d pass your résumé to the hiring manager. Send your résumé link, apply that day, and let them know.

  5. 5

    Bring proof to the interview

    One page of before-and-after numbers from projects you led: scrap, OEE, cycle time, cost. Plant managers hire on results.

This plant: Koch Industries in Lisle

8 other open roles at this site.

All 9 roles at Koch Industries →
Full description from Koch IndustriesAs posted on their careers site.Show

What You Will Do

  • ◆Lead Advanced Quality Planning Activities

Own AQP deliverables for new product introductions and engineering changes, including but not limited to Qualification Plans, Critical Dimension Reviews, control plans, Safe Launch activities, and launch readiness execution.

  • ◆Assist with Cross-Functional Program Execution

Work with Product Design, Manufacturing, Supplier Quality, Procurement, and Operations teams to manage risks, align deliverables, resolve roadblocks, and ensure on-time project execution.

  • ◆Support Product Validation & Process Qualification

Help to develop and support DVP&R strategies, process qualifications, capability studies, Measurement System Analysis (MSA), statistical analysis, and qualification activities for new products and manufacturing processes.

  • ◆Lead Risk Assessment & Problem Solving

Facilitate DFMEA/PFMEA activities, process flow reviews, root cause investigations, Failure Analysis (FA), 8D problem solving, and corrective/preventive actions to improve product and process reliability.

  • ◆Partner with Suppliers & Customers

Review supplier quality documentation, support component qualification activities, ensure completion of customer-required quality documentation, and assist with shipping judgments and product disposition decisions.

  • ◆Drive Continuous Improvement & Product Development Excellence

Lead initiatives focused on improving product development quality, strengthening AQP execution, enhancing risk identification and mitigation, and improving launch readiness across the design and development process. Drive standardization, lessons learned integration, and continuous improvement while supporting compliance to ISO, and EH&S requirements.

  • ◆Provide Global Launch Support

Collaborate with global teams and suppliers through regular off-hours meetings and periodic international travel to Asia to support product launches, supplier development, and manufacturing readiness activities.

Who You Are (Basic Qualifications)

  • ✓Bachelor’s degree in Engineering.
  • ✓Minimum of 1 year of Quality experience in a manufacturing environment.
  • ✓Experience using Minitab or similar statistical software tools.
  • ✓Knowledge of Advanced Quality Planning tools including DFMEA, PFMEA, Control Plans, DOE, and reliability testing.
  • ✓Legal authorization to work in the U.S. without sponsorship now or in the future.
Show full description ↓

Your Job

As a Quality Engineer, New Product Introduction (NPI), you will partner closely with cross-functional Product Development teams—including Product Design, Manufacturing Integration, Process Engineering, Supplier Quality, and Operations—to drive flawless product launches. You will lead Advanced Quality Planning activities that proactively identify and mitigate risk while ensuring products meet customer expectations for Quality, Delivery, and Cost.

This role combines technical problem-solving, project leadership, and quality engineering expertise to support successful new product introductions and continuous improvement initiatives in a fast-paced global manufacturing environment.

Visa sponsorship is not available for this role.

Work Arrangement

This is an on-site role requiring five days per week in the office.

This role involves working with global teams and suppliers in Asia, so you'll occasionally join early morning or evening meetings - about two to three times each week. We value your time and allow flexible schedule to balance these commitments.

Quarterly travel to Asia is part of the job, with trips typically lasting up to two weeks.

What Will Put You Ahead

  • •Bachelor's degree in Mechanical or Industrial Engineering
  • •3+ years of Quality Engineering experience in a manufacturing environment.
  • •ASQ Certified Quality Engineer (CQE) certification preferred.
  • •Working knowledge of manufacturing, molding, testing, and assembly processes.
  • •Experience with ISO 9001 and/or IATF 16949 quality systems.
  • •Experience with supplier quality, auditing, gauge design, and inspection fixture development.
  • •Lean Six Sigma training or certification preferred.

For this role, we anticipate paying $90,000-$110,000 per year. This role is eligible for variable pay, issued as a monetary bonus or in another form.

At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data.

The actual amount may be higher or lower than the range provided considering each candidate's knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy.

Hiring Philosophy

All Koch companies value diversity of thought, perspectives, aptitudes, experiences, and backgrounds. We are Military Ready and Second Chance employers. Learn more about our hiring philosophy here .

Who We Are

As a Koch company, Molex is a leading supplier of connectors and interconnect components, driving innovation in electronics and supporting industries from automotive to health care and consumer to data communications.

The thousands of innovators who work for Molex have made us a global electronics leader. Our experienced people, groundbreaking products and leading-edge technologies help us deliver a wider array of solutions to more markets than ever before.

At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company.

Our Benefits

Our goal is for each employee, and their families, to live fulfilling and healthy lives. We provide essential resources and support to build and maintain physical, financial, and emotional strength - focusing on overall wellbeing so you can focus on what matters most. Our benefits plan includes - medical, dental, vision, flex

More Quality roles nearby