CNC Programmer
Colinear Aerospace · Sparta, NJ
- Level
- Level: Technician
- Team
- Team: Manufacturing
- Degree
- Degree: Required
- Experience asked
- Experience asked: 3+ years
- Industry
- Industry: Industrial
- Posted
- Posted: Recently
The role in 30 seconds
A technician-level manufacturing role at Colinear Aerospace (industrial) in Sparta, NJ. Develop, write, and optimize CNC programs for new and existing aerospace products.
- They ask for
- 3+ years · degree required
- Tools it names
- GD&T, DOE, ISO 9001, AS9100, CNC, Machining
Read from the posting. The full description is below.
From the plant jobs report · week of November 16, 2026
Manufacturing Technician roles in New Jersey: typical posted base $80k–$130k.
Median of the low and high ends of 3 live postings that list pay, out of 20 manufacturing technician openings in New Jersey, read from manufacturers' own careers sites.
New Jersey plant jobs report →Pay by team and state →What moves pay →
How this role compares
Against 22 other live manufacturing postings in New Jersey.
- Base pay
- Not listed in this posting
- Experience asked
- Less than usual (3+ vs 5+)
Typical $82k–$130k, from 8 postings that list pay.
Similar roles usually ask 5+ years.
Skills these teams ask for most
- ✓ Tooling 48%
- Team leadership 43%
- ✓ Machining 43%
- Lean 30%
- ✓ CNC 30%
- EHS / safety 26%
✓ = this posting asks for it too. % = share of similar postings that mention it.
Stands out: this posting asks for GD&T, DOE, ISO 9001, AS9100, which few similar roles mention. If you have it, lead with it.
At a glance
Pulled from the posting text. If it's not listed here, the posting didn't say.
How to get in at this plant
Five moves over a week or two. The first one takes ten minutes.
- 1
Pick 2–3 people on the Manufacturing team at Colinear Aerospace
Engineers who joined in the last year or two reply the most. Use the team search on this page to find them.
- 2
Send a short, curious note
One real question about their work. No favors yet. Each person gets a different note, written for this role.
- 3
Turn a reply into a short call
Questions worth asking about this team:
- What does a normal week look like on your team?
- Is the work mostly new product launches or sustaining existing lines?
- How much time do you spend on the floor versus at a desk?
- How did you land the job? What stood out in your interviews?
- 4
Apply with someone vouching for you
If the call went well, ask whether they’d pass your résumé to the hiring manager. Send your résumé link, apply that day, and let them know.
- 5
Bring proof to the interview
One page of before-and-after numbers from projects you led: scrap, OEE, cycle time, cost. Plant managers hire on results.
Full description from Colinear AerospaceAs posted on their careers site.ShowHide
Experience Level: Mid–Senior
Industry: Aerospace
Quality System: AS9100 Rev D | ISO 9001:2015
- ✓--
Why This Role Exists
The aerospace industry demands absolute precision — and that’s exactly where this role comes in.
Colinear Aerospace continues to grow its aerospace programs and invest in advanced machining capabilities. This CNC Programmer position exists to support new and existing production by developing accurate, efficient, and repeatable CNC programs while improving manufacturing methods and supporting the shop floor.
This is a hands-on programming role with real ownership — not a desk-only position.
- ✓--
The Work You’ll Be Doing
In this role, you will
- ◆Develop, write, and optimize CNC programs for new and existing aerospace products
- ◆Support production with on-the-floor troubleshooting and process improvements
- ◆Create and refine manufacturing methods, routers, and setup documentation
- ◆Collaborate closely with machinists, quality, and engineering to ensure smooth production
- ◆Maintain full traceability and documentation in compliance with AS9100
requirements
- ✓Drive continuous improvement initiatives to reduce cycle time, scrap, and variation
You’ll be directly involved in how parts are made — from print to production.
- ✓--
Machines, Controls & Software
Required
- ✓Bachelor’s degree in Mechanical Engineering (or related field)
- ✓3+ years of CNC machining and programming experience
- ✓Strong understanding of CNC mills and lathes
- ✓Ability to read and interpret blueprints and GD&T
- ✓Experience supporting production in a regulated manufacturing environment
- ✓Strong communication skills and attention to detail
Preferred (Not Required)
- ✓Aerospace machining experience
- ✓Fixture and workholding design experience
- ✓Proven success improving cycle times and standardizing processes
- ✓--
30 / 90-Day Success Expectations
Show full description ↓Show less ↑
🔎At a Glance
Company: Colinear Aerospace
Location: Sparta, New Jersey
Job Type: Full-Time
Pay Range: Competitive / DOE
Shift: Day Shift
Overtime: As needed
You’ll work with tools and systems including
CAD: SolidWorks
Cam: esprit
ERP: JobBOSS
Inspection & Quality: AS9100-compliant documentation and processes
Experience with both mills and lathes is expected.
- •--
Materials You’ll Work With
- •Aluminum
- •Stainless Steel
- •Aerospace alloys
- •--
What We’re Looking For
First 30 Days
- •Learn JobBOSS ERP and begin creating job routings
- •Gain familiarity with existing CNC programs and processes
- •Design a fixture or jaws for an active project
- •Develop a plan to increase monthly programming output
By 90 Days
- •Produce 8–10 CNC programs per month
- •Standardize tooling and workholding where possible
- •Apply best practices (including AI-assisted workflows) within ESPRIT
- •Deliver fully configured 3D models for production use
- •--
Why Machinists & Programmers Like Working Here
- •Aerospace work where quality actually matters
- •Strong engineering-to-shop-floor collaboration
- •Investment in modern software, tooling, and continuous improvement
- •Clean, organized AS9100-certified facility
- •A team that values precision, accountability, and craftsmanship
- •--
Pay & Benefits
- •Competitive compensation based on experience
- •401(k)
- •Medical, dental, and vision insurance
- •Paid time off
- •--
Apply
Interested CNC Programmers can apply directly through hireCNC .
👉 Apply Now or Save This Job to come back later.
