Senior Instrumentation and Controls Engineer
X-energy · Rockville, MD
- Level
- Level: Senior
- Team
- Team: Controls
- Base pay
- Base pay: $189k–$213k
- Degree
- Degree: Required
- Industry
- Industry: Industrial
- Posted
- Posted: 5 days ago
The role in 30 seconds
A senior controls role at X-energy (industrial) in Rockville, MD. In collaboration with engineering leadership, set technical direction at the enterprise level through developing and owning technology or discipline specific roadmaps, best practices, and/or design criteria.
- They ask for
- degree required
- Tools it names
- PLC, Robotics, Automation
- Base pay
- $189k–$213k
Read from the posting. The full description is below.
From the plant jobs report · week of November 16, 2026
Controls Engineer roles in Maryland: typical posted base $95k–$135k. This one lists $189k–$213k.
Median of the low and high ends of 10 live postings that list pay, out of 13 controls engineer openings in Maryland, read from manufacturers' own careers sites.
Maryland plant jobs report →Pay by team and state →What moves pay →
How this role compares
Against 12 other live controls postings in Maryland.
- Base pay
- About 82% above similar roles
- Experience asked
- Not stated
Typical $91k–$129k, from 9 postings that list pay.
Similar roles usually ask 5+ years.
Skills these teams ask for most
- ✓ PLC 38%
- ✓ Automation 38%
- ✓ Team leadership 31%
- Validation (IQ/OQ/PQ) 23%
- Python 23%
✓ = this posting asks for it too. % = share of similar postings that mention it.
At a glance
Pulled from the posting text. If it's not listed here, the posting didn't say.
How to get in at this plant
Five moves over a week or two. The first one takes ten minutes.
- 1
Pick 2–3 people on the Controls team at X-energy
We found 3 people at this company and state: 1 in this kind of role, 2 leaders. Engineers who joined in the last year or two reply the most. See them ↓
- 2
Send a short, curious note
One real question about their work. No favors yet. Each person gets a different note, written for this role.
Write to Dan → (free) - 3
Turn a reply into a short call
Questions worth asking about this team:
- What does a normal week look like on your team?
- How did you land the job? What stood out in your interviews?
- 4
Apply with someone vouching for you
If the call went well, ask whether they’d pass your résumé to the hiring manager. Send your résumé link, apply that day, and let them know.
- 5
Bring proof to the interview
One page of before-and-after numbers from projects you led: scrap, OEE, cycle time, cost. Plant managers hire on results.
This plant: X-energy in Rockville
5 other open roles at this site · 3 people we found in controls roles at X-energy.
- Project Controls Engineer III (Risk Management) · Controls · Senior
- Proposal Production Specialist III-IV · Production · Senior
- Engineer II, Plant & Process · Process
- Project Controls Engineer · Controls
- Project Controls Engineer II (Risk Management) · Controls
Full description from X-energyAs posted on their careers site.ShowHide
qualifications
and responsibilities. All applications will be submitted via our company career page, www.x-energy.com/careers/ . We will never ask you to provide payment information as part of the recruiting process. If anyone claiming to represent X-energy directs you in a manner otherwise, please contact us at www.x-energy.com/contact-us .
Job Description
Our Senior Instrumentation and Controls Engineer is responsible for supporting the design and development of instrumentation and controls (I&C) through all phases of the design lifecycle, including testing, analysis, and implementation of hardware according to the design requirements.
Responsibilities
- ◆I&C design for process systems (controls, instrumentation, data collection, electro-mechanical, automation & robotics, connectivity).
- ◆Work with system and mechanical engineers, designers, and analysts on development of detailed design.
- ◆Support mechanical engineers in developing process flow diagrams, and piping and instrumentation diagrams.
- ◆Interface with Architectural and Engineering firms, as needed, to support development/implementation of I&C system(s).
- ◆Functional Requirement and procurement specifications for instrumentation and control systems.
- ◆Process instrumentation design, specification, and procurement oversight.
- ◆Control Systems for pumps, valves, heat exchangers, and more to improve the functionality of the client’s plant.
- ◆Develop control logic narratives, control logic diagrams, and control logic schematic diagrams.
- ◆Develop panel wiring and interconnect cabling diagrams.
- ◆Create or oversee the development of human machine interface (HMI) screens.
- ◆Develop specifications for Programmable Logic Control (PLC) or Distributed Control systems (DCS) and components and instrumentation. Develop control logic code and implementation on PLCs/DCS.
- ◆Author I&C system hardware descriptions including requirements, functional specifications, and I&C system architecture descriptions.
- ◆Develops troubleshooting plans and failure mode analysis documents to support design reviews.
- ◆Author factory acceptance test procedures.
- ◆Write guidance for instrument checking, calibration, and testing.
- ◆Develop instrument check, calibration, and testing program.
- ◆Participate in system Process Hazards Analysis.
- ◆Directly interfaces with other workgroups (e.g., System Engineering, Operations, Maintenance, Radiation Protection, Cyber Security).
- ◆Assists relevant teams in resolving I&C design issues.
- ◆Provide guidance, as a mentor, in the development of less experienced instrumentation and controls design engineers.
- ◆Lead reviews and presentations for internal company design reviews and customer design reviews regarding I&C design.
- ◆Preparation and review of design change packages and design calculations (e.g., load flow, short circuit, protective device coordination, etc.) in accordance with company policies and procedures.
- ◆Assist Project management leadership in developing detailed schedules and resolving planning issues for I&C design activities.
- ◆Lead the execution of the core tasks and responsibilities, listed in the Job Profile Task/Responsibilities section of this document, without close supervision and complete latitude for independent judgement.
- ◆Implement process management to deliver high quality I&C design support to the organization.
- ◆In collaboration with engineering leadership, set technical direction at the enterprise level through developing and owning technology or discipline specific roadmaps, best practices, and/or design criteria.
- ◆Maintain professional demeanor and behavior at all times in all forms of communication.
- ◆Perform other duties as assigned by manager.
Qualifications
- ✓Bachelor’s degree in nuclear engineering, controls engineering, instrumentation, electrical engineering, electronic engineering, or electrical computer engineering, or related discipline from an accredited university or college.
- ✓Typically, twenty years of experience in an engineering role required.A master’s degree in engineering or related field (may include a combination of experience obtained through an academic institution, e.g., design projects, research, or design teams, as well as professional experience) may be in lieu of two years of experience.A Ph.D. in engineering or related field (may include a combination of experience obtained through an academic institution, e.g., design projects, research, or design teams, as well as professional experience) may be in lieu of three years of experience.Previous experience at X-energy exceeding performance standards may be in lieu of years of experience.
- ✓Experience in application or development of software codes or standards.
- ✓Knowledge or experience in software engineering, software development, or utilization of a software development toolset.
As required by Maryland and other applicable state law, X Energy, LLC (X-energy) lists the expected compensation range for a publicly advertised job opportunity based upon the job
requirements
(e.g. education/training, experience, skill sets, etc.). Individual candidates who meet the job
qualifications
for the position, along with a view on internal equity, market data, and room for growth.
Show full description ↓Show less ↑
X-energy LLC conducts a thorough recruiting process and will never issue offers without interview to discuss
