ShopFloorJobs
PG

Senior Controls & Automation Engineer, Kansas City Plant

Procter & Gamble · Kansas

Level
Level: Senior
Team
Team: Controls
Base pay
Base pay: $126k–$157k
Travel
Travel: 10%
Degree
Degree: Required
Experience asked
Experience asked: 5+ years
Industry
Industry: Industrial
Posted
Posted: 4 days ago

The role in 30 seconds

A senior controls role at Procter & Gamble (industrial) in Kansas. Testing, documentation, training, and lifecycle-support plans enable a disciplined handoff to plant operations and maintenance.

They ask for
5+ years · degree required
Tools it names
Root cause, Validation (IQ/OQ/PQ), PLC, Automation
Base pay
$126k–$157k
Day to day
about 10% travel

Read from the posting. The full description is below.

From the plant jobs report · week of November 16, 2026

Controls Engineer roles in the US: typical posted base $97k–$140k. This one lists $126k–$157k.

Median of the low and high ends of 363 live postings that list pay, out of 1089 controls engineer openings in the US, read from manufacturers' own careers sites.

Kansas plant jobs report →Pay by team and state →What moves pay →

How this role compares

Against 9 other live controls postings in Kansas.

Experience asked
More than usual (5+ vs 3+)

Similar roles usually ask 3+ years.

Skills these teams ask for most

  • ✓ PLC 100%
  • ✓ Automation 90%
  • ✓ Team leadership 40%
  • ✓ Validation (IQ/OQ/PQ) 30%
  • ✓ Root cause 20%
  • EHS / safety 20%

✓ = this posting asks for it too. % = share of similar postings that mention it.

It asks for 5+ years. If you're close, apply anyway: requirements are a wish list. Talk to someone doing this work there first.

At a glance

Pulled from the posting text. If it's not listed here, the posting didn't say.

How to get in at this plant

Five moves over a week or two. The first one takes ten minutes.

  1. 1

    Pick 2–3 people on the Controls team at Procter & Gamble

    We found 1 person at this company and state: 1 leaders. Engineers who joined in the last year or two reply the most. See them ↓

  2. 2

    Send a short, curious note

    One real question about their work. No favors yet. Each person gets a different note, written for this role.

    Write to Joshua → (free)
  3. 3

    Turn a reply into a short call

    Questions worth asking about this team:

    • What does a normal week look like on your team?
    • The posting says about 10% travel. Between which sites?
    • How did you land the job? What stood out in your interviews?
  4. 4

    Apply with someone vouching for you

    If the call went well, ask whether they’d pass your résumé to the hiring manager. Send your résumé link, apply that day, and let them know.

  5. 5

    Bring proof to the interview

    One page of before-and-after numbers from projects you led: scrap, OEE, cycle time, cost. Plant managers hire on results.

Full description from Procter & GambleAs posted on their careers site.Show

What You Will Do

  • ◆Lead controls and automation delivery: Own the controls, instrumentation, automation, and system-integration scope from early design through startup, qualification, operational handoff, and sustainment.
  • ◆Define integrated system architecture: Develop control architectures, functional requirements, interface specifications, control narratives, network requirements, and technical execution plans for coordinated manufacturing systems.
  • ◆Drive equipment and line integration: Define machine-to-machine interfaces, operating sequences, equipment states, fault handling, interlocks, permissives, changeover coordination, and recovery strategies across connected equipment.
  • ◆Provide technical direction: Lead design reviews and technical decisions with OEMs, system integrators, engineering, operations, maintenance, quality, safety, IT/OT, and digital teams. Coach supporting engineers and drive adherence to site and corporate standards.
  • ◆Deliver robust software and controls: Develop, review, and troubleshoot PLC, HMI/SCADA, motion, vision, instrumentation, and supervisory-control applications using disciplined engineering, testing, version-control, and change-management practices.
  • ◆Integrate data and manufacturing systems: Connect automation platforms with production reporting, quality, historian, performance-monitoring, and plant information systems while protecting deterministic control performance and data integrity.
  • ◆Own testing and startup readiness: Plan and lead design verification, factory and site acceptance testing, commissioning, qualification, validation support, vertical startup, defect resolution, and final technical turnover.
  • ◆Ensure safety, quality, and compliance: Apply electrical safety, machine safety, cybersecurity, quality, and regulatory requirements. Verify safe-state behavior, alarm and fault strategies, traceability, and product-protection controls.
  • ◆Build sustainable site capability: Create and maintain design files, software backups, test records, standards, training materials, support procedures, spare-parts recommendations, and lifecycle plans. Train plant personnel and transition systems to long-term ownership.

Required

  • ✓Bachelor’s degree in Electrical Engineering, Automation Engineering, Controls Engineering, or a related technical field.
  • ✓At least 3-5 years of progressive experience delivering industrial controls and automation solutions in a manufacturing environment.
  • ✓Hands-on experience with PLC and HMI/SCADA development, including Rockwell Automation ControlLogix or comparable industrial platforms.
  • ✓Experience integrating industrial equipment, instrumentation, drives, motion systems, machine vision, safety systems, and industrial networks.
  • ✓Demonstrated experience with system design, troubleshooting, root-cause analysis, commissioning, startup, and production support.
  • ✓Ability to lead technical work across OEMs, system integrators, project teams, and plant functions without relying on direct reporting relationships.
  • ✓Working knowledge of electrical design practices, machine-safety principles, control-system cybersecurity, software version control, and formal change management.
  • ✓Strong written and verbal communication skills, with the ability to convert complex technical

requirements

into clear designs, plans, and decisions.

  • ✓Ability to work on site five days per week at the Kansas City Plant and travel domestically up to 10%.
Show full description ↓

Job Location

Kansas city plant - f&hc

Job Description

Role summary

We are seeking a Senior Controls and Automation Engineer to provide technical leadership for the design, integration, commissioning, and long-term support of industrial controls and automation systems at our Kansas City manufacturing site . This role will guide equipment suppliers, system integrators, and cross-functional plant teams to deliver safe, reliable, maintainable, and scalable automation solutions for new and existing manufacturing capabilities.

What Success Looks Like

  • •Automation systems are delivered safely, on schedule, and ready for reliable production operation.
  • •Equipment and information systems operate as one coordinated manufacturing solution with clear ownership boundaries and maintainable interfaces.
  • •Testing, documentation, training, and lifecycle-support plans enable a disciplined handoff to plant operations and maintenance.
  • •Technical risks are surfaced early, decisions are documented, and corrective actions result in sustainable improvements rather than temporary fixes.

Work Environment

This is an on-site manufacturing role at our Kansas City Plant that includes office, production-floor, equipment-testing, commissioning, and startup activities. Work may occasionally occur outside normal business hours to support critical testing, startup, or operational events. Appropriate personal protective equipment and site safety procedures are required in manufacturing areas.

Job

Preferred

  • +Experience with high-speed discrete manufacturing, packaging, material handling, or coordinated multi-machine production systems.
  • +Experience with supervisory control architectures, equipment-state models, batch or sequence control, and standardized machine integration methods such as PackML.
  • +Experience with FactoryTalk View, industrial historians, manufacturing information systems, virtualization, and segmented IT/OT network architectures.
  • +Experience producing and executing user requirements, design-basis documents, interface specifications, test protocols, validation traceability, and turnover packages.
  • +Experience applying data analytics, advanced controls, or digital manufacturing tools to improve reliability, quality, throughput, and operational decision-making.
  • +Professional Engineer licensure, TÜV Functional Safety certification, ISA/IEC 62443 cybersecurity training, or relevant Rockwell Automation certifications.

At P&G, we believe that diverse experiences help build strong l

More Controls roles in Kansas