ShopFloorJobs
MI

Test Imaging and Instrumentation Technician

Mach Industries · Victorville, CA

Level
Level: Technician
Team
Team: Reliability
Industry
Industry: Aerospace & defense
Posted
Posted: 4 days ago

The role in 30 seconds

A technician-level reliability role at Mach Industries (aerospace & defense) in Victorville, CA. § 1157, or (iv) Asylee under 8 U.S.C.

Read from the posting. The full description is below.

From the plant jobs report · week of November 16, 2026

Maintenance Technician roles in California: typical posted base $72k–$118k.

Median of the low and high ends of 8 live postings that list pay, out of 179 maintenance technician openings in California, read from manufacturers' own careers sites.

California plant jobs report →Pay by team and state →What moves pay →

How this role compares

Against 188 other live reliability postings in California.

Base pay
Not listed in this posting

Typical $90k–$120k, from 16 postings that list pay.

Experience asked
Not stated

Similar roles usually ask 5+ years.

Skills these teams ask for most

  • Team leadership 46%
  • Welding 34%
  • PLC 34%
  • Tooling 22%
  • Root cause 21%
  • EHS / safety 20%

✓ = this posting asks for it too. % = share of similar postings that mention it.

Stands out: this posting asks for New product launch, which few similar roles mention. If you have it, lead with it.

At a glance

Pulled from the posting text. If it's not listed here, the posting didn't say.

How to get in at this plant

Five moves over a week or two. The first one takes ten minutes.

  1. 1

    Pick 2–3 people on the Reliability team at Mach Industries

    We found 2 people at this company and state: 1 in this kind of role, 1 leaders. Engineers who joined in the last year or two reply the most. See them ↓

  2. 2

    Send a short, curious note

    One real question about their work. No favors yet. Each person gets a different note, written for this role.

    Write to Joe → (free)
  3. 3

    Turn a reply into a short call

    Questions worth asking about this team:

    • What does a normal week look like on your team?
    • How did you land the job? What stood out in your interviews?
  4. 4

    Apply with someone vouching for you

    If the call went well, ask whether they’d pass your résumé to the hiring manager. Send your résumé link, apply that day, and let them know.

  5. 5

    Bring proof to the interview

    One page of before-and-after numbers from projects you led: scrap, OEE, cycle time, cost. Plant managers hire on results.

This plant: Mach Industries in Victorville

5 other open roles at this site · 2 people we found in reliability roles at Mach Industries.

Full description from Mach IndustriesAs posted on their careers site.Show

The Role

The Test Imaging & Instrumentation Technician supports engineering tests and launch operations by setting up and operating camera, drone, and data-acquisition equipment at test and launch sites. This hands-on role is suited to someone with launch vehicle or aerospace test experience who can work safely in active test environments, including areas where hazardous or energetic materials may be present, and capture reliable visual and instrumentation data.

The ideal candidate has practical experience with high-speed imaging, infrared cameras, and RF data acquisition. They are comfortable working outdoors, coordinating with engineering and test teams, following site-specific controls, and adapting to changing test plans and schedules.

Key Responsibilities

  • ◆Set up, operate, and maintain high-speed visible-light and infrared camera systems for vehicle, propulsion, and ground tests.
  • ◆Provide engineering camera support, including equipment placement, focus and exposure checks, triggering, synchronization, and troubleshooting.
  • ◆Support RF and other data-acquisition equipment, including recording, organizing, and handing off test data.
  • ◆Provide camera support for drone/UAS operations in accordance with site and safety requirements.
  • ◆Work in or near designated hazardous-material and energetic-material areas only when authorized, trained, and following applicable site procedures.
  • ◆Follow required material-handling controls, access restrictions, personal protective equipment requirements, and emergency procedures.
  • ◆Coordinate with engineers, technicians, safety personnel, and test teams to meet test objectives and capture requirements.
  • ◆Stop work and notify the appropriate personnel if conditions appear unsafe or site

requirements

are unclear.

  • ✓Verify, organize, and deliver recorded imagery and associated test data.
  • ✓Follow site access, safety, equipment-handling, and operational procedures.
  • ✓Travel to and work at test and launch sites, including outdoors and on nonstandard schedules as test operations require.

Required Qualifications

  • ✓Experience supporting launch vehicle, propulsion, aerospace, or comparable engineering test operations.
  • ✓Hands-on experience operating high-speed camera systems.
  • ✓Experience with infrared imaging and RF or other data-acquisition systems.
  • ✓Ability to set up, troubleshoot, and safely handle technical equipment in active test environments.
  • ✓Ability to follow hazardous-material and energetic-material safety procedures, including site-specific training, access controls, and PPE requirements.
  • ✓Strong organizational skills and attention to detail when recording and managing test imagery and data.
  • ✓Ability to work effectively with engineers, technicians, safety personnel, and test teams.
  • ✓Willingness and ability to travel to test and launch sites and work outdoors or on nonstandard schedules as required.

Preferred Qualifications

  • ✓Experience supporting drone/UAS camera operations.
  • ✓Experience with camera triggering, synchronization, and multi-camera test setups.
  • ✓Familiarity with test-site operations, range procedures, or launch campaigns.
  • ✓Experience working at sites where hazardous or energetic materials are present.
  • ✓Relevant hazardous-material, camera, instrumentation, UAS, or technical training and certifications.
  • ✓Experience managing and delivering engineering imagery or test data.

Additional

Requirements

  • ✓Available to work extended hours and weekends as needed

ITAR

Requirements

To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here .

Level I

$35 — $40 USD

Level II

$40 — $45 USD

Level III

$45 — $50 USD

Show full description ↓

About Mach Industries

Founded in 2023, Mach Industries is a rapidly growing defense technology company focused on developing next-generation autonomous defense platforms. At the core of our mission is the commitment to delivering scalable, decentralized defense systems that enhance the strategic capabilities of the United States and its allies. With a workforce of approximately 350 employees, we operate with startup agility and ambition.

Our vision is to redefine the future of warfare through cutting-edge manufacturing, innovation at speed, and unwavering focus on national security. We are dedicated to solving the next generation of warfare with lethal systems that deter kinetic conflict and protect global security.

More Reliability roles nearby