ShopFloorJobs
LP

Second Shift Maintenance Technician

Leggett & Platt · Verona, MS

Level
Level: Technician
Team
Team: Reliability
Experience asked
Experience asked: 30+ years
Industry
Industry: Industrial
Posted
Posted: 3 days ago

The role in 30 seconds

A technician-level reliability role at Leggett & Platt (industrial) in Verona, MS. Leggett & Platt has divisions that design, manufacture, and sell a variety of products for all areas of life.

They ask for
30+ years

Read from the posting. The full description is below.

From the plant jobs report · week of November 16, 2026

Maintenance Technician roles in Mississippi: typical posted base $46k–$58k.

Median of the low and high ends of 3 live postings that list pay, out of 51 maintenance technician openings in Mississippi, read from manufacturers' own careers sites.

Mississippi plant jobs report →Pay by team and state →What moves pay →

How this role compares

Against 54 other live reliability postings in Mississippi.

Experience asked
More than usual (30+ vs 5+)

Similar roles usually ask 5+ years.

Skills these teams ask for most

  • ✓ Team leadership 45%
  • Welding 35%
  • PLC 31%
  • Tooling 22%

✓ = this posting asks for it too. % = share of similar postings that mention it.

Stands out: this posting asks for Cost reduction, which few similar roles mention. If you have it, lead with it.

It asks for 30+ years. If you're close, apply anyway: requirements are a wish list. Talk to someone doing this work there first.

At a glance

Pulled from the posting text. If it's not listed here, the posting didn't say.

How to get in at this plant

Five moves over a week or two. The first one takes ten minutes.

  1. 1

    Pick 2–3 people on the Reliability team at Leggett & Platt

    Engineers who joined in the last year or two reply the most. Use the team search on this page to find them.

  2. 2

    Send a short, curious note

    One real question about their work. No favors yet. Each person gets a different note, written for this role.

  3. 3

    Turn a reply into a short call

    Questions worth asking about this team:

    • What does a normal week look like on your team?
    • How did you land the job? What stood out in your interviews?
  4. 4

    Apply with someone vouching for you

    If the call went well, ask whether they’d pass your résumé to the hiring manager. Send your résumé link, apply that day, and let them know.

  5. 5

    Bring proof to the interview

    One page of before-and-after numbers from projects you led: scrap, OEE, cycle time, cost. Plant managers hire on results.

Full description from Leggett & PlattAs posted on their careers site.Show

Job Summary

Maintenance Technicians are required to repair, maintain, build, overhaul and troubleshoot problems with various types of machines and equipment. As well as perform facility maintenance as needed.

Qualifications, Knowledge, Education & Experience

Must be at least 18 years of age to perform this job. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The

requirements

listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.

Responsibilities

  • ◆Review maintenance work orders and P.M.’s and projects assigned daily to ensure tasks are being completed in a timely manner.
  • ◆Analyze any reoccurring problems with machinery & equipment and come up with permanent repair ideas and fixes and cost reduction.
  • ◆Perform preventative & routine maintenance as scheduled in a timely manner.
  • ◆The ability to look up repair parts via prints and/or spreadsheets, catalogs or online, or discuss with outside vendors and get quotes to fill out requisition forms to be approved for parts to be ordered.
  • ◆Provide own tools.
  • ◆Perform work on mechanical drive systems such as belts, pulleys, speed reducers, roller chain, sprockets, shafts, and bearings mostly used on conveyor systems and tables.
  • ◆Must have strong troubleshooting skills in mechanical components and systems.
  • ◆Operate lift truck, scissor lift, boom lift and other equipment as needed.
  • ◆Follow all safety procedures and practices.
  • ◆Must be able to operate and understand lockout/tagout procedures.
  • ◆Responsible for housekeeping duties in the maintenance work area and any area where repairs are being made on the plant floor; this includes wiping down any machinery worked on.
  • ◆Perform facility/building maintenance and repair and projects as needed and required in a timely manner.
  • ◆Must follow all rules, policies, and procedures outlined in the company handbook.
  • ◆Must have the ability to troubleshoot electrical systems and components: 480-volts 3 phase, 220-volt single phase, 110 single phase, 24-volt AC and DC control voltage used on contactors, drives, photo eyes, proximity switches, coils, limit switches, safety switches, fuses and breakers.
  • ◆Ability to replace failed electrical components as needed.
  • ◆Hydraulic troubleshooting skills
  • ◆Must be able to identify failed hydraulic components and repair as needed on hydraulic systems control valves, pumps, cylinders and pressure transducers.

Education

  • ✓High School diploma or GED equivalent required; or equivalent combination of education and experience.

Experience

  • ✓None

responsibilities

performed on a regular and continual basis. It does not exclude other duties that may be assigned.

For more information about how we handle your personal data in connection with our recruiting processes, please refer to the Recruiting Privacy Notice on the “Privacy Notice” tab located at http://privacy.leggett.com

What to Do Next

Now that you’ve had a chance to learn more about us, what are you waiting for! Apply today and allow us the opportunity to learn more about you and the value you can bring to our team. Once you apply, be sure to create a profile, and sign up for job alerts, so you can be the first to know when new opportunities become available.

Our Values

Our values speak to our shared beliefs, and describe how we approac

Show full description ↓

Elite Comfort Solutions, a Leggett & Platt Company, is comprised of hardworking individuals dedicated to delivering innovative, high-quality foam products for the bedding and furniture markets and beyond. With locations around the globe, we offer a world of opportunities in areas such as business, information technology, and manufacturing.

We make life more comfortable.

Leggett & Platt’s overall mission is a commitment to enhance lives – by delivering quality products, offering empowering and rewarding careers, and doing our part in bringing about a better future.

Leggett & Platt’s inventive heritage and leadership span more than 130 years. Leggett & Platt has divisions that design, manufacture, and sell a variety of products for all areas of life. Our reliable product development and launch capability, coupled with our global footprint, make us a trusted partner for customers in the automotive, furniture, hydraulic cylinders, flooring, textile and geo components industries.

Learn more about the history of Leggett & Platt: https://leggett.com/history

Bedding

The world leader in bedding technology.

Leggett & Platt has been the driving force in bedding components technology since inventing the bedspring in 1885. Now, we own more mattress industry patents than anyone in the world.

Springs, foam, adjustable beds, machinery – our Bedding businesses design, produce, and supply innovative sleep solutions that help you rest comfortably.

Learn more about Bedding Components: L&P Bedding Group

Job Title: Second Shift Maintenance Technician

Position Classification: Non-Exempt - Hourly

Knowledge, Skills, and Abilities

  • •Attendance/Punctuality - Is consistently at work and on time.
  • •Quality - Demonstrates accuracy and thoroughness; maintains a clean and organized work environment.
  • •Quantity - Meets productivity standards; Completes work in timely manner; Strives to increase productivity.
  • •Safety - Observes all safety procedures and policies; Reports potentially unsafe conditions to supervisor; Uses equipment and materials properly.
  • •Good attention to detail.
  • •Able to work accurately from verbal and written instructions.

This description is a general statement of required major duties and

More Reliability roles nearby