Specialist, Quality Engineer
L3Harris · Greenville, TX
- Level
- Level: Engineer
- Team
- Team: Quality
- Degree
- Degree: Required (or equivalent experience)
- Experience asked
- Experience asked: 4+ years
- Industry
- Industry: Aerospace & defense
- Posted
- Posted: 9 days ago
The role in 30 seconds
An engineer-level quality role at L3Harris (aerospace & defense) in Greenville, TX. Position has possibility of working off-shift hours/OT and/or weekends and may require up to 10% travel to off-site locations in support of program needs.
- They ask for
- 4+ years · degree required (or equivalent experience)
- Tools it names
- Lean, Six Sigma, Root cause, FMEA, APQP, AS9100
- Openings
- 2 with this title at this site
Read from the posting. The full description is below.
From the plant jobs report · week of November 16, 2026
Quality Engineer roles in Texas: typical posted base $90k–$143k.
Median of the low and high ends of 55 live postings that list pay, out of 145 quality engineer openings in Texas, read from manufacturers' own careers sites.
Texas plant jobs report →Pay by team and state →What moves pay →
How this role compares
Against 144 other live quality postings in Texas.
- Base pay
- Not listed in this posting
- Experience asked
- Less than usual (4+ vs 5+)
Typical $90k–$143k, from 54 postings that list pay.
Similar roles usually ask 5+ years.
Skills these teams ask for most
- ✓ Root cause 66%
- ✓ Lean 37%
- ✓ Six Sigma 35%
- ✓ FMEA 32%
- Supplier quality 30%
- SPC 28%
✓ = this posting asks for it too. % = share of similar postings that mention it.
Stands out: this posting asks for APQP, CNC, Machining, which few similar roles mention. If you have it, lead with it.
At a glance
Pulled from the posting text. If it's not listed here, the posting didn't say.
How to get in at this plant
Five moves over a week or two. The first one takes ten minutes.
- 1
Pick 2–3 people on the Quality team at L3Harris
We found 1 person at this company and state: 1 leaders, plus 1 likely hiring manager. Engineers who joined in the last year or two reply the most. See them ↓
- 2
Send a short, curious note
One real question about their work. No favors yet. Each person gets a different note, written for this role.
Write to Will → (free) - 3
Turn a reply into a short call
Questions worth asking about this team:
- What does a normal week look like on your team?
- Which standards drive the work here: ISO 13485, IATF 16949, AS9100?
- How much of the job is customer complaints versus prevention?
- How did you land the job? What stood out in your interviews?
- 4
Apply with someone vouching for you
If the call went well, ask whether they’d pass your résumé to the hiring manager. Send your résumé link, apply that day, and let them know.
- 5
Bring proof to the interview
One page of before-and-after numbers from projects you led: scrap, OEE, cycle time, cost. Plant managers hire on results.
This plant: L3Harris in Greenville
2 other open roles at this site · 1 person we found in quality roles at L3Harris.
- Sr. Assoc, Material Process Engineer · Process · Senior
- Director, Aerospace Engineering · Manufacturing · Director+
Specialist, Quality Engineer at L3Harris in other locations
L3Harris lists this title in 8 places. Pick the plant you can get to.
- Anaheim, CA · $84k–$156k
- Salt Lake City, UT
- Huntsville, AL
- Malabar, FL
- Camden, AR
- Hanover, MD · $73k–$135k
- San Diego, CA · $84k–$156k
Full description from L3HarrisAs posted on their careers site.ShowHide
requirements
are met. Serves as the primary interface to customers and supplier for quality related matters.
Further investigates the cause for discrepancies and nonconformities to develop disposition and recommends corrective action plans. Leads material review board and Process Failure Mode Effects Analysis (PFMEA) activities. Interfaces with hanger dock and line, engineering, customer, vendor and subcontractor representatives to ensure
requirements
are met.
Essential Functions
· The candidate filling this position will be responsible for conformity inspections of assemblies and detail parts to ensure compliance with design and technical data.
· Compliance audits of
requirements
related to company procedures, DCMA 8210.1, AS9100, AS9110, and FAA regulations.
· Position has possibility of working off-shift hours/OT and/or weekends and may require up to 10% travel to off-site locations in support of program needs.
· Perform in-process audits to ensure compliance
requirements
of AS9100, AS9110, and DCMA 8210.1 instructions.
· Perform Investigations related to customer escapes, concerns, or other significant quality issues to include root cause determinations and preventative actions.
· Mechanical fabrication (CNC machining, sheetmetal and assembly modification) experience to Blueprint and Technical Specifications.
· Electrical fabrication of multiple pin connectors, harness fabrication experience to Blueprint and Technical Specifications.
Required Qualifications
- ✓Bachelor’s degree with a minimum of 4 years of relevant experience, or a graduate degree with a minimum of 2 years of related experience; in lieu of a degree, a minimum of 8 years of related experience.
· Intimately familiar with FAA documentation and Regulations (CFR 14).
· Must have a cooperative attitude and be able to positively interface with internal and external customer personnel.
· Must be able to obtain US DoD security clearance.
· Experience performing conformity inspections of FAA articles.
· Must be able to complete necessary training for inclusion on the ODA Inspection Unit Member Roster and perform FAA Final Inspections.
· Composite fabrication and related plastic processes a plus.
Preferred Qualifications
- ✓Experience in manufacturing, aerospace, defense, or other highly regulated environment.
- ✓Working knowledge of quality tools and methodologies such as 8D, ZDP, FMEA, RCCA, APQP, and mistake-proofing techniques.
- ✓Understanding of aircraft maintenance, repair, and overhaul (MRO) operations.
- ✓Experience using data analysis and reporting tools such as Excel, PowerPoint, and PowerBI.
- ✓Lean and/or Six Sigma experience preferred.
- ✓Familiar with Lean/Six Sigma principles.
- ✓Familiar with DCMA 8210.1 and AS9100/AS9110 requirements.
- ✓Familiar with AS9102 First Article Inspections
requirements
for access to classified information.
By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiarie
Show full description ↓Show less ↑
L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do.
L3Harris is the Trusted Disruptor in defense tech. With customers’ mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.
Job Title: Specialist, Quality Control Auditor
Job Location: Greenville, Texas
Job Schedule: 5/8: Employees work 8 hours per day, 5 days a week or 9/80: Employees work 9 out of every 14 days - totaling 80 hours worked - and have every other Friday off or 4/10: Employees work 10 hour days, 4 days a week
Job Description
Position is for a Quality Specialist (Quality Control Auditor). Responsible for the design, development and implementation of standards, methods, and procedures for inspecting, testing, and evaluating the precision and accuracy of company products in compliance with contractual and regulatory requirements. Performs analysis on reported nonconformities and discrepancies related to detail and assembly processes of mechanical and electrical activities. Further investigates the cause for discrepancies and nonconformities to develop disposition and recommends corrective action plans. Interfaces with engineering, customer, vendor, and subcontractor representatives to ensure
