ShopFloorJobs
KI

Fiber Optic Engineering Technician

Koch Industries · Lisle, IL

Level
Level: Engineer
Team
Team: Manufacturing
Degree
Degree: Required
Experience asked
Experience asked: 5+ years
Industry
Industry: Industrial
Posted
Posted: Recently

The role in 30 seconds

An engineer-level manufacturing role at Koch Industries (industrial) in Lisle, IL. MPO/MTP or other multifiber connectors.

They ask for
5+ years · degree required
Tools it names
Root cause, DOE, Automation, Tooling

Read from the posting. The full description is below.

From the plant jobs report · week of November 16, 2026

Manufacturing Engineer roles in Illinois: typical posted base $97k–$134k.

Median of the low and high ends of 49 live postings that list pay, out of 87 manufacturing engineer openings in Illinois, read from manufacturers' own careers sites.

Illinois plant jobs report →Pay by team and state →What moves pay →

How this role compares

Against 86 other live manufacturing postings in Illinois.

Base pay
Not listed in this posting

Typical $96k–$128k, from 42 postings that list pay.

Experience asked
Typical (5+ years)

Similar roles usually ask 5+ years.

Skills these teams ask for most

  • ✓ Root cause 41%
  • Validation (IQ/OQ/PQ) 41%
  • ✓ Tooling 37%
  • Lean 36%
  • New product launch 34%
  • ✓ Automation 25%

✓ = this posting asks for it too. % = share of similar postings that mention it.

It asks for 5+ years. If you're close, apply anyway: requirements are a wish list. Talk to someone doing this work there first.

At a glance

Training program

Pulled from the posting text. If it's not listed here, the posting didn't say.

How to get in at this plant

Five moves over a week or two. The first one takes ten minutes.

  1. 1

    Pick 2–3 people on the Manufacturing team at Koch Industries

    We found 2 people at this company and state: 2 leaders. Engineers who joined in the last year or two reply the most. See them ↓

  2. 2

    Send a short, curious note

    One real question about their work. No favors yet. Each person gets a different note, written for this role.

    Write to Ken → (free)
  3. 3

    Turn a reply into a short call

    Questions worth asking about this team:

    • What does a normal week look like on your team?
    • Is the work mostly new product launches or sustaining existing lines?
    • How much time do you spend on the floor versus at a desk?
    • How did you land the job? What stood out in your interviews?
  4. 4

    Apply with someone vouching for you

    If the call went well, ask whether they’d pass your résumé to the hiring manager. Send your résumé link, apply that day, and let them know.

  5. 5

    Bring proof to the interview

    One page of before-and-after numbers from projects you led: scrap, OEE, cycle time, cost. Plant managers hire on results.

This plant: Koch Industries in Lisle

8 other open roles at this site · 2 people we found in manufacturing roles at Koch Industries.

All 9 roles at Koch Industries →
Full description from Koch IndustriesAs posted on their careers site.Show

Who You Are (Basic Qualifications)

  • ✓5+ years of experience as a technician, in a laboratory, manufacturing, or product-development position
  • ✓Strong mechanical aptitude and ability to work with small, precision components.
  • ✓Ability to use microscopes, calipers, micrometers, force gauges, and other precision measurement equipment, as well as hand tools.
  • ✓Ability to read engineering drawings, specifications, and test procedures.
  • ✓Comfortable recording and analyzing test data using Microsoft Excel.
  • ✓Strong troubleshooting and problem-solving skills.
Show full description ↓

Your Job

The Fiber Optic Engineering Technician supports the development, prototyping, testing, and qualification of fiber optic connectors, cable assemblies, and related connectivity products. This position works closely with mechanical, optical, manufacturing, and product development engineers to turn new concepts into functional prototypes and validated product designs.

The ideal candidate is highly hands-on, detail-oriented, and comfortable building fiber optic assemblies, operating optical and mechanical test equipment, troubleshooting failures, and documenting test results.

Our Team

Molex is an industry leader in transforming optical network infrastructure with an unwavering commitment to speed, reliability, and performance. We proudly engineer high-performance systems for critical, fast-growing industries including data centers, telecom, medical, and industrial automation. Our team develops an advanced portfolio of optical solutions, ranging from cutting-edge optical connectivity products—such as expanded beam connectors, fiber management, adapters, and hybrid copper/fiber solutions for medical systems—to end-to-end optoelectronic solutions featuring cages, connectors, optical transceivers, and cable assemblies. Supporting extreme data rates from 100 Mbps to 1.6 Tbps across long-haul distances up to 80km+, we deliver complete wavelength management and turnkey OEM solutions. Come join Molex and help build the future of global connectivity.

Prototype Development

  • •Build and modify prototype fiber optic connectors, adapters, cable assemblies, fixtures, and related components.
  • •Perform fiber preparation, stripping, cleaving, termination, polishing, cleaning, and inspection.
  • •Support rapid prototype iterations for new connector and cable-assembly concepts.
  • •Develop and modify fixtures and test setups in collaboration with engineers.
  • •Maintain prototype materials, components, tools, and development hardware.

Fiber Optic Testing

  • •Perform insertion loss and return loss testing on single-mode and multimode fiber assemblies.
  • •Conduct fiber end-face inspection using appropriate inspection equipment and acceptance criteria.
  • •Operate optical power meters, light sources, interferometers, microscopes, and other fiber-optic laboratory equipment.
  • •Support mechanical testing such as mating/unmating, tensile, retention, durability, and dimensional measurements.
  • •Assist engineers with environmental and reliability qualification testing.
  • •Record results accurately and identify abnormal test behavior or product failures.

Engineering Support

  • •Work directly with engineers during feasibility studies, design experiments, DOE activities, and product-development programs.
  • •Execute engineering test plans and provide clear feedback on prototype performance and manufacturability.
  • •Assist with failure analysis, root-cause investigation, and corrective-action experiments.
  • •Identify practical improvements to prototype designs, assembly methods, tooling, fixtures, and test processes.
  • •Support development of engineering samples for internal reviews, customer evaluations, and qualification programs.

Documentation

  • •Maintain accurate laboratory notebooks, test records, sample identification, photographs, and measurement data.
  • •Prepare basic test reports and summarize experimental results.
  • •Document prototype assembly procedures and test methods.
  • •Support development and maintenance of work instructions and laboratory procedures.
  • •Maintain calibration status and proper operation of assigned laboratory equipment.

What Success Looks Like

A strong Fiber Optic Engineering Technician should be able to

  • •Take an engineer's concept and physically build it.
  • •Produce consistent, high-quality fiber terminations and prototype assemblies.
  • •Set up, execute or coordinate testing with minimal supervision.
  • •Recognize unexpected results rather than simply recording them.
  • •Troubleshoot whether a problem originates in the design, component, assembly process, fixture, or test method.
  • •Capture enough data and documentation for engineers to make informed design decisions.
  • •Help engineers iterate prototypes substantially faster.

What Will Put You Ahead

  • •Associate degree in Engineering Technology, Electronics Technology, Mechanical Technology, Photonics, Optics, or a related technical discipline
  • •Experience with several of the following would be especially valuable:

· Fiber stripping and preparation

· Precision fiber cleaving

· Fiber connector termination

· Fiber polishing

· Connector end-face inspection

· Insertion loss / return loss testing

· Single-mode and multimode fiber

· MPO/MTP or other multifiber connectors

· Optical power meters and light sources

· Interferometry

· IEC 61300 series fiber-optic testing

· IEC 61300-3-35 end-face inspection

· Environmental and mechanical qualification testing

For this role, we anticipate paying $35 - $42 per hour. This role is eligible for variable pay, issued as a monetary bonus or in another form.

At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided considering each candidate's knowledge, ski

More Manufacturing roles nearby