Mechanical Technician
INEOS · Alvin, TX
- Level
- Level: Technician
- Team
- Team: Reliability
- Industry
- Industry: Chemicals
- Posted
- Posted: 6 days ago
The role in 30 seconds
A technician-level reliability role at INEOS (chemicals) in Alvin, TX. Inspect, troubleshoot, repair, overhaul, and install rotating equipment and associated systems.
- Tools it names
- Welding, Extrusion
Read from the posting. The full description is below.
From the plant jobs report · week of November 16, 2026
Maintenance Technician roles in Texas: typical posted base $75k–$114k.
Median of the low and high ends of 3 live postings that list pay, out of 287 maintenance technician openings in Texas, read from manufacturers' own careers sites.
Texas plant jobs report →Pay by team and state →What moves pay →
How this role compares
Against 298 other live reliability postings in Texas.
- Base pay
- Not listed in this posting
- Experience asked
- Not stated
Typical $89k–$114k, from 6 postings that list pay.
Similar roles usually ask 4+ years.
Skills these teams ask for most
- Team leadership 52%
- ✓ Welding 37%
- PLC 32%
- Root cause 24%
✓ = this posting asks for it too. % = share of similar postings that mention it.
Stands out: this posting asks for Extrusion, which few similar roles mention. If you have it, lead with it.
At a glance
Pulled from the posting text. If it's not listed here, the posting didn't say.
How to get in at this plant
Five moves over a week or two. The first one takes ten minutes.
- 1
Pick 2–3 people on the Reliability team at INEOS
We found 2 people at this company and state: 2 in this kind of role. Engineers who joined in the last year or two reply the most. See them ↓
- 2
Send a short, curious note
One real question about their work. No favors yet. Each person gets a different note, written for this role.
Write to Alexander → (free) - 3
Turn a reply into a short call
Questions worth asking about this team:
- What does a normal week look like on your team?
- How did you land the job? What stood out in your interviews?
- 4
Apply with someone vouching for you
If the call went well, ask whether they’d pass your résumé to the hiring manager. Send your résumé link, apply that day, and let them know.
- 5
Bring proof to the interview
One page of before-and-after numbers from projects you led: scrap, OEE, cycle time, cost. Plant managers hire on results.
This plant: INEOS in Alvin
5 other open roles at this site · 2 people we found in reliability roles at INEOS.
- Electrical Maintenance Technician · Reliability · Technician
- Lead Process Control Engineer · Controls · Manager
- Production Engineer, Furnace · Production
- Process Control Engineer · Controls
- Process Engineer, Polymers · Process
Full description from INEOSAs posted on their careers site.ShowHide
How the Role Fits In
Mechanical Maintenance Technicians are tasked with daily application of expertise to ensure the safe and reliable operation of site process plants and reduce operating costs. This is accomplished by executing assigned work according to plan and schedule, noting any job plan deviations, and providing input on improvement opportunities.
Responsibilities
AND Accountabilities
Show full description ↓Show less ↑
Company
INEOS Olefins & Polymers USA
Interested in joining a winning team? A team whose employees are empowered to make a difference?
Job Title : Technician, Mechanical
Location : Chocolate Bayou Works Alvin, Texas
Grade : Hourly
Organizational Context and Job Purpose
The Chocolate Bayou Works site is located in Southeastern Texas about 40 miles south of Houston and consists of two Olefin units that produce approximately 3bn pounds/year of ethylene, 2 Polypropylene units that produce approximately 800m pounds/ year of polypropylene, storage and transfer facilities at Stratton Ridge. The site also provides knowledge sharing support and functional guidance through relationships with the PE / PP facilities at Battleground and the Hobbs gas processing facility in New Mexico, with the headquarters located in League City, TX.
Maintenance and Reliability
- •Safely perform maintenance and repairs in accordance with site safety procedures, work permits, equipment specifications, and maintenance schedules.
- •Inspect, troubleshoot, repair, overhaul, and install rotating equipment and associated systems.
- •Clean and lubricate machinery, perform basic diagnostic and performance tests, and test damaged machine parts to determine whether major repairs are necessary.
- •Execute preventive, predictive, and corrective maintenance using precision maintenance techniques to maximize equipment performance.
- •Identify opportunities to improve equipment reliability and reduce maintenance costs.
- •Participate in emergency repairs, outages, and turnaround activities.
Work Execution and Documentation
- •Read and interpret equipment drawings, P&IDs, schematics, manuals, and engineering documents.
- •Document completed work and provide detailed feedback to improve maintenance plans and procedures.
- •Complete assigned tasks independently and work proficiently as part of a team
Machinery Assembly and Equipment Handling
- •Repair and assemble machinery, position components for assembly, and replace defective parts using hoists and moving equipment.
- •Apply thorough knowledge of the load-bearing capabilities of equipment used to lift and move machinery.
- •Read and follow blueprints and technical instructions when positioning and assembling components.
Specific Skill
Rotating Equipment Maintenance
- •Pumps: Rebuild and repair ANSI centrifugal pumps and repair vertical turbine, diaphragm, positive displacement, and gear pumps. Replace bearings, mechanical seals, sleeves, packing, and couplings. Troubleshoot cavitation, vibration, and hydraulic performance issues.
- •Compressors: Maintain reciprocating, screw, and centrifugal compressors. Replace bearings, seals, pistons, valves, rings, and related components, and troubleshoot auxiliary systems.
- •Extruders: Maintain single-screw and twin-screw extrusion systems. Replace screws, barrels, gearboxes, couplings, drives, heaters, and cooling components. Verify alignment and operating clearances.
- •Blowers and fans: Rebuild and align process blowers and fans. Replace bearings, shafts, seals, belts, and couplings, and perform vibration-related troubleshooting and corrective repairs.
- •Agitators: Repair shafts, impellers, seals, and gear reducers. Verify alignment and mechanical integrity.
- •Gearboxes: Disassemble, inspect, rebuild, and install industrial gearboxes. Measure backlash, bearing preload, and shaft runout. Diagnose lubrication, wear, and vibration-related issues.
- •General maintenance: Replace defective machine parts, repair and lubricate equipment, and adjust moving-part clearances and alignment.
Mechanical Seals and Support Systems
- •Install and troubleshoot cartridge, single, and dual mechanical seals.
- •Maintain and inspect associated seal support systems.
Hydraulic, Pneumatic, and Utility Systems
- •Troubleshoot hydraulic pumps, cylinders, valves, motors, and filtration systems. Read and interpret hydraulic schematics.
- •Repair pneumatic valves, actuators, regulators, and air distribution equipment. Read and interpret pneumatic schematics.
- •Maintain cooling tower fans, gearboxes, driveshafts, bearings, couplings, and motors.
- •Troubleshoot utility equipment supporting plant operations.
Precision Maintenance and Alignment
- •Install and align pumps, couplings, machines, and equipment using precision laser alignment and other alignment methods. Identify and correct soft foot.
- •Measure shaft runout, bearing fits, and critical clearances using precision measurement techniques.
- •Install and remove bearings, and install and align couplings.
- •Insert shims, adjust nut and bolt tension, and position parts to achieve specified clearances between moving and stationary components.
- •Level equipment and bedplates, establish centerlines using straightedges, levels, and transits, and perform equipment grouting.
- •Read and interpret blueprints and technical drawings.
Equipment Installation and Rigging
- •Assemble and install equipment, moving parts, and subassemblies using hand and power tools. Bolt components such as side and deck plates, jaw plates, and journals to basic assembly units.
- •Position steel beams to support machine and equipment bedplates, using blueprints and schematic drawings to determine work procedures.
- •Signal crane operators to lower basic assembly units onto bedplates and align units to centerlines.
- •Move machinery and equipment using hoists, dollies, rollers, and trucks. Perform rigging and hoisting activities.
- •Bolt, weld, rivet, or otherwise fasten machines to foundations or other structures using hand
