ShopFloorJobs
IM

Engineer III, Quality-Manufacturing

ICU Medical · Salt Lake City, UT

Level
Level: Senior
Team
Team: Quality
Travel
Travel: 5%
Degree
Degree: Required (or equivalent experience)
Experience asked
Experience asked: 18+ years
Certification
Certification: Green Belt preferred
Industry
Industry: Medical devices
Posted
Posted: 30+ days ago
Apply on ICU Medical ↗

The role in 30 seconds

A senior quality role at ICU Medical (medical devices) in Salt Lake City, UT. IV medication safety software providing full IV-EHR interoperability with the highest customer satisfaction and compatibility with more EHR systems than any other company.

They ask for
18+ years · degree required (or equivalent experience) · Green Belt preferred
Tools it names
Green Belt, Kaizen, Root cause, DMAIC, SPC, FMEA
Day to day
about 5% travel

Read from the posting. The full description is below.

From the plant jobs report · week of November 16, 2026

Quality Engineer roles in Utah: typical posted base $79k–$119k.

Median of the low and high ends of 3 live postings that list pay, out of 10 quality engineer openings in Utah, read from manufacturers' own careers sites.

Utah plant jobs report →Pay by team and state →What moves pay →

How this role compares

Against 9 other live quality postings in Utah.

Experience asked
More than usual (18+ vs 4+)

Similar roles usually ask 4+ years.

Skills these teams ask for most

  • ✓ Validation (IQ/OQ/PQ) 80%
  • ✓ Root cause 70%
  • Lean 50%
  • Six Sigma 50%
  • ✓ SPC 40%
  • ✓ FMEA 40%

✓ = this posting asks for it too. % = share of similar postings that mention it.

It asks for 18+ years. If you're close, apply anyway: requirements are a wish list. Talk to someone doing this work there first.

At a glance

Lifts up to 40 lbs

Pulled from the posting text. If it's not listed here, the posting didn't say.

How to get in at this plant

Five moves over a week or two. The first one takes ten minutes.

  1. 1

    Pick 2–3 people on the Quality team at ICU Medical

    Engineers who joined in the last year or two reply the most. Use the team search on this page to find them.

  2. 2

    Send a short, curious note

    One real question about their work. No favors yet. Each person gets a different note, written for this role.

  3. 3

    Turn a reply into a short call

    Questions worth asking about this team:

    • What does a normal week look like on your team?
    • Which standards drive the work here: ISO 13485, IATF 16949, AS9100?
    • How much of the job is customer complaints versus prevention?
    • The posting says about 5% travel. Between which sites?
    • The posting mentions a Green Belt. Does the company sponsor certification?
  4. 4

    Apply with someone vouching for you

    If the call went well, ask whether they’d pass your résumé to the hiring manager. Send your résumé link, apply that day, and let them know.

  5. 5

    Bring proof to the interview

    One page of before-and-after numbers from projects you led: scrap, OEE, cycle time, cost. Plant managers hire on results.

This plant: ICU Medical in Salt Lake City

7 other open roles at this site.

All 8 roles at ICU Medical →
Full description from ICU MedicalAs posted on their careers site.Show

Position Summary

The Manufacturing Quality Engineer III is an advanced Quality Engineer and technical lead responsible for complex investigations, CAPA quality, manufacturing quality-health improvement, risk-based process control, and cross-functional problem solving. The role leads defect-reduction projects and mentors developing Quality Engineers.

Responsibilities

  • ◆Lead complex NCMRs involving recurrence, high cost, multi-lot impact, unclear root cause, process-control weakness, validation linkage, supplier/manufacturing interface, or potential customer/field impact.
  • ◆Define investigation strategy, required evidence, containment rigor, risk rationale, disposition logic, and escalation

requirements

for complex records.

  • ✓Review and coach QE I/QE II NCMR, complaint, and CAPA records for technical quality, GDP, and closure readiness.
  • ✓Support CAPA Owners with complex manufacturing quality issues by reviewing investigations, root causes, corrective actions, supporting evidence, and effectiveness checks.
  • ✓Lead complex internal and external complaint manufacturing reviews, including linkage to NCMR, CAPA, supplier, process, and field history.
  • ✓Serve as technical quality lead for assigned manufacturing areas, including process-control health, validation support, PFMEA/control plan linkage, acceptance criteria, inspection strategy, and procedure/training improvements.
  • ✓Occasionally support process changes for quality risk, verification/validation needs, inspection impacts, supplier impacts, and QMS record requirements.
  • ✓Lead medium-to-large cross-functional continuous-improvement projects tied to NCMR reduction, complaint reduction, CAPA effectiveness, process capability, scrap/rework reduction, or systemic process-control improvement.
  • ✓Facilitate Kaizen events by defining scope, pre-work, metrics, team roles, current/future state, root-cause logic, implementation actions, and sustainment plans.
  • ✓Mentor QE I/QE II personnel on investigations, CAPA thinking, complaint reviews, risk-based disposition, data analysis, CI methods, and technical writing.

Knowledge, Skills &

Qualifications

  • ✓Advanced knowledge of complex investigation leadership, CAPA root cause/action/effectiveness, complaint technical conclusions, process-control review, validation/change support, PFMEA/control plan linkage, SPC/capability, and risk management.
  • ✓Green Belt-level DMAIC skill, Kaizen facilitation, A3/PDCA, advanced root cause analysis, project governance, technical mentoring, presentation skills, and data-driven quality-health management.
  • ✓Ability to influence Manufacturing, Engineering, Quality Systems, Supplier Quality, Operations, and leadership toward sustainable quality improvements.
  • ✓Strong audit readiness, technical writing, communication, and cross-functional decision-making capability.

Education and Experience

  • ✓Must be at least 18 years of age.
  • ✓Bachelor’s degree from an accredited college or university in Engineering, Science, Quality, Technology, or a related discipline; advanced degree or equivalent experience helpful.
  • ✓At least 4-7 years’ relevant experience of quality engineering, manufacturing quality, process engineering, supplier quality, or regulated manufacturing experience.
  • ✓Demonstrated experience leading complex NCMRs, CAPAs, complaint investigations, process-control improvements, and cross-functional problem solving.
  • ✓Green Belt certification expected or strongly preferred. ASQ CQE, lead auditor, or equivalent quality certification preferred.

Physical

Show full description ↓

and Work Environment

  • •This role requires both manufacturing and office environment.
  • •While working in the manufacturing environment, high-noise areas, radiological hazards, lasers, and/or biological hazards may be encountered.
  • •Lift up to 40 lbs unassisted.
  • •Typically requires travel less than 5% of the time.

ICU Medical has consistently provided you with clinical innovations that help solve real-world challenges.

With the acquisition of Hospira Infusion Systems in 2017 and Smiths Medical in 2022, we are now a global market leader with a complete line of clinically-essential IV therapy and high-value critical care products for hospital, alternate site, and home care settings.

We're ready to bring you consistent quality, innovation, and value in more areas than ever. Our focus allows us to bring you:

  • •Dedicated and non-dedicated IV sets and needlefree connectors clinically proven to provide an effective barrier against bacterial transfer and colonization.
  • •The industry’s broadest IV smart pump offering covering large volume, pain management, and ambulatory needs.
  • •IV medication safety software providing full IV-EHR interoperability with the highest customer satisfaction and compatibility with more EHR systems than any other company.
  • •Significant US IV solutions manufacturing and supply capabilities.

ICU Medical EEO Statement

ICU Medical EEO Policy Statement

ICU Medical CCPA Notice to Job Applicants

More Quality roles nearby