ShopFloorJobs
Z

Process Engineer

Zobility · Suwanee, GA

Level
Level: Engineer
Team
Team: Process
Base pay
Base pay: $100k–$130k
Degree
Degree: Required (or equivalent experience)
Experience asked
Experience asked: 6+ years
Industry
Industry: Industrial
Posted
Posted: Recently
Apply on Zobility ↗

The role in 30 seconds

An engineer-level process role at Zobility (industrial) in Suwanee, GA. Identifies, improves, recommends, and implements measures to improve production methods, equipment performance, process capability and product quality.

They ask for
6+ years · degree required (or equivalent experience)
Tools it names
Lean
Base pay
$100k–$130k

Read from the posting. The full description is below.

From the plant jobs report · week of November 16, 2026

Process Engineer roles in Georgia: typical posted base $100k–$130k. This one lists $100k–$130k.

Median of the low and high ends of 4 live postings that list pay, out of 26 process engineer openings in Georgia, read from manufacturers' own careers sites.

Georgia plant jobs report →Pay by team and state →What moves pay →

How this role compares

Against 25 other live process postings in Georgia.

Experience asked
More than usual (6+ vs 5+)

Similar roles usually ask 5+ years.

Skills these teams ask for most

  • ✓ Lean 58%
  • Root cause 50%
  • Six Sigma 46%
  • Cost reduction 42%
  • FMEA 27%
  • ✓ Team leadership 27%

✓ = this posting asks for it too. % = share of similar postings that mention it.

It asks for 6+ years. If you're close, apply anyway: requirements are a wish list. Talk to someone doing this work there first.

At a glance

Lifts up to 25 lbs

Pulled from the posting text. If it's not listed here, the posting didn't say.

How to get in at this plant

Five moves over a week or two. The first one takes ten minutes.

  1. 1

    Pick 2–3 people on the Process team at Zobility

    Engineers who joined in the last year or two reply the most. Use the team search on this page to find them.

  2. 2

    Send a short, curious note

    One real question about their work. No favors yet. Each person gets a different note, written for this role.

  3. 3

    Turn a reply into a short call

    Questions worth asking about this team:

    • What does a normal week look like on your team?
    • Is the work mostly new product launches or sustaining existing lines?
    • How much time do you spend on the floor versus at a desk?
    • How did you land the job? What stood out in your interviews?
  4. 4

    Apply with someone vouching for you

    If the call went well, ask whether they’d pass your résumé to the hiring manager. Send your résumé link, apply that day, and let them know.

  5. 5

    Bring proof to the interview

    One page of before-and-after numbers from projects you led: scrap, OEE, cycle time, cost. Plant managers hire on results.

Full description from ZobilityAs posted on their careers site.Show

and Duties

  • ◆Evaluates customer drawings and data for labor quotation and documentation creation.
  • ◆Performs design for assembly (DFA) and design for fabrication (DFF) analysis of product designs using Valor, communicate and mange analysis results and solutions to our suppliers (EMS) and internal design teams to influence quality and manufacturability.
  • ◆Supports the Lean culture and effectively use Lean Sigma concepts and tools to identify and eliminate waste while improving processes.
  • ◆Identifies, improves, recommends, and implements measures to improve production methods, equipment performance, process capability and product quality.
  • ◆Leads the development of design documentation, materials and designs for Manufacturability.
  • ◆Streamlines manufacturing processes, procedures, work instructions to improve first pass yield, eliminate rework and scrap, standardize and reduce SMT setup and waste.
  • ◆Monitors SMT process and establishes robust, repeatable, and reproducible process parameters and process controls.
  • ◆Provides guidance, direction, and coordination to the technical staff thereby contributing to improvement of skill levels, quality standards, process improvements, problem solving abilities, and continued technical development through education to achieve the six-sigma SMT processing level.
  • ◆Designs and orders solder paste stencils.
  • ◆Provides labor quotes to program management for new products.
  • ◆Creates panelization drawings for quoting as well as new product introductions.
  • ◆Assists in lean manufacturing initiatives.
  • ◆Enters assembly bills of material (BOM) in MRP system from customer BOM.
  • ◆Writes and implements Engineering Change Orders (ECO's).
  • ◆Writes and distributes Temporary Deviation Notices (TDN's).
  • ◆Participates in proactive team efforts to achieve departmental and company goals.
  • ◆Performs other duties as assigned.

Requirements

  • ✓Design for manufacturability DFM for electronic assemblies.
  • ✓Expert knowledge of IPC 610, IPC J-Standard 001.
  • ✓Knowledge in Lean Manufacturing methods with an electronics products manufacturer.
  • ✓Knowledge in using MFG ERP software or similar manufacturing software.
  • ✓Strong thorough knowledge of DFM, NPI, Pin-in-Paste, PoP processes, reporting and tools.
  • ✓Knowledge of use and operation of standard office equipment and be familiar with commonly used CAD, email, Internet, word processing, databases and spreadsheets.
  • ✓Communication interpersonal skills as applied to interaction with coworkers, supervisor, the general public, etc. sufficient to exchange or convey information and to receive work direction.
  • ✓6+ years of demonstrated experience in SMT process engineering.
  • ✓Must be able to read and understand PCA assembly drawings and technical notes.
  • ✓Must be able to define problems, collect data, establish facts, draw valid conclusions, and demonstrate the ability to determine critical parameters and develop process controls.
  • ✓5+ years' experience in a manufacturing environment with SMT knowledge.
  • ✓Experience in Contract Manufacturing and EMS industry desired.

Physical

Requirements

  • ✓Must be able to occasionally lift up to 25 lbs. in an 8 hour shift.
  • ✓Be able to perform light physical activity performing non-strenuous daily activities of a productive/technical nature.
  • ✓Manual dexterity sufficient to reach/handle items, works with the fingers and perceive attributes of objects and materials.

Education

  • ✓Bachelor's Degree or equivalent experience in a technical discipline (computer science, engineering, etc.).
Show full description ↓

3 days ago Be among the first 25 applicants

Get AI-powered advice on this job and more exclusive features.

Direct message the job poster from Zobility

The Product Engineer is responsible for timely introduction of new products into the manufacturing environment while ensuring the highest levels of quality. The Process Engineer works closely with the customer, program management and production personnel to improve design for manufacturability, as well as define, validate and implement processes to support the introduction of new products into a lean manufacturing environment.

The Process Engineer will report to the Engineering and Manufacturing Technology Manager.

Software Used

  • •Microsoft Office
  • •CAD Software
  • •ERP/MRP

Seniority level

  • •Seniority level

Mid-Senior level

Employment type

  • •Employment type

Full-time

Job function

  • •Job function

Manufacturing

  • •Industries

Staffing and Recruiting and Electrical Equipment Manufacturing

Referrals increase your chances of interviewing at Zobility by 2x

Inferred from the description for this job

Medical insurance

Vision insurance

401(k)

Get notified about new Process Engineer jobs in Suwanee, GA .

Norcross, GA $100,000.00-$130,000.00 4 days ago

Industrial Engineer – Aerospace Process Optimization

Process Improvement Engineer / Aerospace

Senior Process Engineer - Capital Projects

Atlanta, GA $75,000.00-$85,000.00 4 months ago

Decatur, GA $90,000.00-$100,000.00 1 month ago

Business Process Engineer - Hybrid Work Environment

Principal Process Engineer - Capital Projects

Gainesville, GA $90,000.00-$120,000.00 1 day ago

Project Engineer/Scientist - Remediation

Sandy Springs, GA $85,000.00-$100,000.00 2 weeks ago

Process Engineer/ Client Services Manager - #2678.32

Decatur, GA $90,000.00-$110,000.00 2 weeks ago

Plastics Processing Manufacturing Engineer

Cumming, GA $75,000.00-$95,000.00 5 days ago

Electrical Engineer - Industrial & Water/Wastewater

Project Engineer – Regulatory Battery Compliance

Flowery Branch, GA $90,000.00-$120,000.00 2 hours ago

Clarkston, GA $98,413.00-$120,282.00 2 months ago

We’re unlocking community knowledge in a new way. Experts add insights directly into each article, started with the help of AI.

More Process roles nearby