Process Engineer
MME group Inc. · Vadnais Heights, MN
- Level
- Level: Engineer
- Team
- Team: Process
- Experience asked
- Experience asked: 6+ years
- Industry
- Industry: Industrial
- Posted
- Posted: Recently
The role in 30 seconds
An engineer-level process role at MME group Inc. (industrial) in Vadnais Heights, MN. Develop robust process utilizing scientific molding techniques, such as gate freeze analysis, short shot analysis, etc.
- They ask for
- 6+ years
- Tools it names
- SPC, DOE, Injection molding, Tooling
Read from the posting. The full description is below.
From the plant jobs report · week of November 16, 2026
Process Engineer roles in Minnesota: typical posted base $100k–$129k.
Median of the low and high ends of 14 live postings that list pay, out of 17 process engineer openings in Minnesota, read from manufacturers' own careers sites.
Minnesota plant jobs report →Pay by team and state →What moves pay →
How this role compares
Against 16 other live process postings in Minnesota.
- Base pay
- Not listed in this posting
- Experience asked
- Typical (6+ years)
Typical $100k–$129k, from 14 postings that list pay.
Similar roles usually ask 6+ years.
Skills these teams ask for most
- Root cause 53%
- Lean 41%
- ✓ Tooling 41%
- Six Sigma 35%
- New product launch 35%
- Validation (IQ/OQ/PQ) 35%
✓ = this posting asks for it too. % = share of similar postings that mention it.
At a glance
Pulled from the posting text. If it's not listed here, the posting didn't say.
How to get in at this plant
Five moves over a week or two. The first one takes ten minutes.
- 1
Pick 2–3 people on the Process team at MME group Inc.
Engineers who joined in the last year or two reply the most. Use the team search on this page to find them.
- 2
Send a short, curious note
One real question about their work. No favors yet. Each person gets a different note, written for this role.
- 3
Turn a reply into a short call
Questions worth asking about this team:
- What does a normal week look like on your team?
- Is the work mostly new product launches or sustaining existing lines?
- How much time do you spend on the floor versus at a desk?
- How did you land the job? What stood out in your interviews?
- 4
Apply with someone vouching for you
If the call went well, ask whether they’d pass your résumé to the hiring manager. Send your résumé link, apply that day, and let them know.
- 5
Bring proof to the interview
One page of before-and-after numbers from projects you led: scrap, OEE, cycle time, cost. Plant managers hire on results.
Full description from MME group Inc.As posted on their careers site.ShowHide
Responsibilities
- ◆Develop robust process utilizing scientific molding techniques, such as gate freeze analysis, short shot analysis, etc. as defined in the approved protocol.
- ◆Utilize and develop DOE to meet process goals.
- ◆Document findings of sample and submit report to Process Lead, Tooling Engineer, and Program Manager.
- ◆Supply engineering file with the following information: DOE, process sheet, water diagram.
- ◆Collaborate with quality group to verify product criteria.
- ◆Support production through starting up machines and problem-solving processes.
- ◆Share ideas on how the team or process can be improved.
- ◆Locates, safely transports, and stores the injection mold in accordance with established guidelines and procedure.
- ◆Installs and removes injection molds from assigned presses.
- ◆Set-up and prepare auxiliary/ secondary support equipment as required at the press.
- ◆Follows proper set-up/cycle sheets.
- ◆Documents process control for samples presses.
- ◆Verify documents are correctly filled out prior to set-up sign-off.
- ◆Takes shots of parts and visually checks them for defects, logging information into paperwork.
- ◆Operates forklifts and overhead cranes while conducting mold set-up when needed.
- ◆Maintains and promotes a safe and clean working environment.
- ◆Keep clean and organized throughout the shift, not just at the end of the shift.
- ◆Other tasks assigned by supervisor.
Qualifications
and Skill
Requirements
- ✓High School Diploma or GED Required
- ✓Valid identification and the ability to legally work in the United States
- ✓6 years of molding process in the plastic industry
- ✓Basic computer experience with word processing, spreadsheet, and email software, preferably in Microsoft Suite
- ✓Thorough knowledge of plastic resins, mold set-up and functions of an injection molding press; processing on injection molding machines; statistical process controls is preferred; ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists
- ✓Ability to write clearly and legibly reports and correspondence
- ✓Technical mathematical computations (e.g., basic arithmetic and statistics)
- ✓Attention to detail and problem-solving willingness
- ✓Positive attitude and adaptability to support the business
- ✓Excellent written and oral communication skills
- ✓Ability to read and interpret safety rules, operating and maintenance instructions, and procedural manuals
- ✓Effective communication in one-on-one and small group settings
- ✓Physical ability to walk, climb stairs, and perform tasks at the shop/floor level
- ✓Ability to lift a minimum of 50 lbs unaided
- ✓Embodies company Core Values (We Are Customer Focused, We Execute, We Are Respectful, We Win Together)
Salary
$75k - $85k
Show full description ↓Show less ↑
Join to apply for the Process Engineer role at MME group Inc.
Join a team where precision meets purpose. At MME Group - A Seaway Plastics Company, our expertise in plastic injection molding drives innovation and quality for highly regulated industries. We’re looking for a skilled Injection Molding Process Engineer to help us deliver excellence from concept to production. Based in our Vadnais Heights, MN facility, this role is central to ensuring that every product meets the highest standards through scientific molding, process optimization, and collaboration across teams. If you thrive on solving complex challenges, improving processes, and turning ideas into results, we want to hear from you.
Because we support customers that contract with the U.S. government and supply directly to the Department of Defense, all candidates must meet the definition of a "U.S. person" as defined by the International Traffic in Arms Regulations (ITAR).
Primary
Benefits Include
- •STD/LTD
- •Life Insurance
- •Pet Insurance
- •Tuition Reimbursement
More Process roles nearby
- Manufacturing Process Engineer · 3M · Maplewood · 3 mi
- Molding Process Technician (Monday - Thursday, 2:00pm - 12:00am) · Dover · Roseville · 5 mi
- GMP Process Engineer · Bio-Techne · St. Paul · 8 mi
- Senior Principal Advanced Manufacturing Engineer, Laser Processing & Precision Joining – NMPH – Fridley, MN (Onsite) · Medtronic · Fridley · 10 mi
