Equipment Engineer Wet Processes
ASML · Wilton, CT
- Level
- Level: Engineer
- Team
- Team: Process
- Experience asked
- Experience asked: 9+ years
- Industry
- Industry: Industrial
- Posted
- Posted: Recently
The role in 30 seconds
An engineer-level process role at ASML (industrial) in Wilton, CT. BS in an engineering (Chemical ,Mechanical, or Electrical).
- They ask for
- 9+ years
- Tools it names
- PLC
Read from the posting. The full description is below.
From the plant jobs report · week of November 16, 2026
Process Engineer roles in Connecticut: typical posted base $100k–$150k.
Median of the low and high ends of 10 live postings that list pay, out of 14 process engineer openings in Connecticut, read from manufacturers' own careers sites.
Connecticut plant jobs report →Pay by team and state →What moves pay →
How this role compares
Against 13 other live process postings in Connecticut.
- Base pay
- Not listed in this posting
- Experience asked
- More than usual (9+ vs 5+)
Typical $100k–$120k, from 9 postings that list pay.
Similar roles usually ask 5+ years.
Skills these teams ask for most
- Root cause 86%
- FMEA 57%
- Validation (IQ/OQ/PQ) 57%
- Tooling 50%
- Six Sigma 50%
- SPC 50%
✓ = this posting asks for it too. % = share of similar postings that mention it.
Stands out: this posting asks for PLC, which few similar roles mention. If you have it, lead with it.
At a glance
Pulled from the posting text. If it's not listed here, the posting didn't say.
How to get in at this plant
Five moves over a week or two. The first one takes ten minutes.
- 1
Pick 2–3 people on the Process team at ASML
We found 1 person at this company and state: 1 in this kind of role. Engineers who joined in the last year or two reply the most. See them ↓
- 2
Send a short, curious note
One real question about their work. No favors yet. Each person gets a different note, written for this role.
Write to Raymond → (free) - 3
Turn a reply into a short call
Questions worth asking about this team:
- What does a normal week look like on your team?
- Is the work mostly new product launches or sustaining existing lines?
- How much time do you spend on the floor versus at a desk?
- How did you land the job? What stood out in your interviews?
- 4
Apply with someone vouching for you
If the call went well, ask whether they’d pass your résumé to the hiring manager. Send your résumé link, apply that day, and let them know.
- 5
Bring proof to the interview
One page of before-and-after numbers from projects you led: scrap, OEE, cycle time, cost. Plant managers hire on results.
This plant: ASML in Wilton
5 other open roles at this site · 1 person we found in process roles at ASML.
- Production Engineer Tooling Asset Management · Production
- Senior Contamination Control Engineer · Controls · Senior
- Sr Contamination Control Engineer · Controls · Senior
- Senior Process Engineer- Functional Testing & Inspection · Process · Senior
- Process Improvement Engineer – Manufacturing Facilities · Lean / CI
Full description from ASMLAs posted on their careers site.ShowHide
Work experience
4-9 years
Educational background
- ✓Chemical Engineering
- ✓Mechanical Engineering
- ✓Electrical Engineering
Technical field
System Industrialization
Travel
10%
Workplace type
On-Site
Fulltime/parttime
Full time
responsibilities
The Optics Fabrication group in Wilton, CT creates precision optical components for all of our DUV and EUV lithography systems. Our optics are used in various internal systems such as wafer alignment, wafer leveling, inspection, stage measurement, reticle manipulation, and metrology measurements.
The Equipment Engineering group directly supports all of Optics Fabrication by delivering safe, precise, reliable equipment with maximum uptime availability for Production to meet their quality and throughput goals. Optical fabrication processes rely on stable equipment for proper execution, an Equipment Engineer must maximize machine availability using the following skill sets:
- ◆Proper equipment selection based on reliability and maintainability
- ◆Creating preventative maintenance plans and supporting their execution
- ◆Defining critical spares for quick response to unplanned downtime
- ◆Defining standard maintenance procedures to maximize maintenance effectiveness
- ◆Plan strategic upgrades and identifying end of life equipment
- ◆Hands on support of equipment modifications and upgrades
- ◆Assisting the Maintenance Teams with advanced troubleshooting
The equipment engineer will support lithography and etch processes by working closely with other process engineers, technicians, machine operators, product development teams, and safety teams. Their equipment focus will be on all “wet” processes including aqueous or chemical cleaning, etching, and lithographic patterning. The equipment base includes manual and fully automated cleaning stations, along with acid etch and lithography equipment.
Education and experience
- ✓BS in an engineering (Chemical ,Mechanical, or Electrical)
- ✓6+ years experience supporting wet process equipment, chemical delivery systems, fluid handling systems, or industrial utility infrastructure.
- ✓Familiarity with PLCs and machine controls
- ✓Advanced troubleshooting skills for mechanical, electrical and software related issues
Responsibilities
There is potential for exposure to strong magnetic fields, high voltage and currents.
This position requires access to controlled technology, as defined in the United States Export Administration Regulations (15 C.F.R. § 730, et seq.). Qualified candidates must be legally authorized to access such controlled technology prior to beginning work. Business demands may require ASML to proceed with candidates who are immediately eligible to access controlled technology.
Inclusion and diversity
Show full description ↓Show less ↑
- •Home
- •Careers
- •Search jobs
Equipment Engineer Wet Processes
Apply Now
In a nutshell
Location
Wilton, CT, US
Team
Design Engineering and Architecture
Share this job
Equipment Engineer Wet Processes
Introduction
ASML brings together the most creative minds in science and technology to develop lithography machines that are key to producing faster, cheaper, more energy-efficient microchips. We design, develop, integrate, market and service these advanced machines, which enable our customers - the world’s leading chipmakers - to reduce the size and increase the functionality of their microchips, which in turn leads to smaller, more powerful consumer electronics. Our main headquarters are located in Veldhoven, the Netherlands, and we also have 18 office locations around the United States- including main offices in Wilton, CT, Chandler, AZ, San Jose, CA and San Diego, CA.
Roles and
Skills
- •Self-motivation for executing independent tasks
- •Prioritize safety of operators and equipment users over anything else
- •Ability to tackle technical problems hands on
- •Strong analytical skills for advanced troubleshooting
- •Excellent documentation abilities to build preventative maintenance plans and spare parts lists
- •Ability to clearly interface with equipment vendors and service technicians
- •Strong desire to learn and grow in a challenging field
- •Patience and determination to perform tasks consistently and completely
- •Team-player attitude to work within a dynamic group
Other information
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
- •While performing the duties of this job, the employee routinely is required to sit; walk; talk; hear; use hands to keyboard, finger, handle, and feel; stoop, kneel, crouch, twist, reach, and stretch.
- •The employee is occasionally required to move around the campus.
- •The employee may occasionally lift and/or move up to 20 pounds.
- •May require travel dependent on company needs.
- •Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and ability to adjust focus.
- •Can work under deadlines.
- •The environment generally is moderate in temperature and noise level.
- •Must be able to read and interpret data, information, and documents.
- •Can observe and respond to people and situations and interact with others encountered in the course of work.
- •Can learn and apply new information or skills.
This position requires access to controlled technology, as defined in the Export Administration Regulations (15 C.F.R. § 730, et seq.). Qualified candidates must be legally authorized to access such controlled technology prior to beginning work. Business demands may require ASML to proceed with candidates who are immediately eligible to access controlled technology.
Additional
