ShopFloorJobs
n

Manufacturing Supervisor (Swing Shift) - Tues-Sat 5:00P-1:30A

nLIGHT · Camas, WA

Level
Level: Supervisor
Team
Team: Manufacturing
Base pay
Base pay: $86k–$100k
Degree
Degree: Required
Industry
Industry: Industrial
Posted
Posted: Recently
Apply on nLIGHT ↗

The role in 30 seconds

A supervisor manufacturing role at nLIGHT (industrial) in Camas, WA. Maintains a safe, inclusive, and compliant workplace by reinforcing safe work practices; addressing hazards; supporting incident investigations; and ensuring adherence to company policies, manufacturing procedures, quality-system requirements, cleanroom.

They ask for
degree required
Tools it names
Lean, Six Sigma, 5S, Value stream mapping, Root cause, Capacity planning
Base pay
$86k–$100k

Read from the posting. The full description is below.

From the plant jobs report · week of November 16, 2026

Production Supervisor roles in Washington: typical posted base $88k–$111k. This one lists $86k–$100k.

Median of the low and high ends of 20 live postings that list pay, out of 33 production supervisor openings in Washington, read from manufacturers' own careers sites.

Washington plant jobs report →Pay by team and state →What moves pay →

How this role compares

Against 17 other live manufacturing postings in Washington.

Experience asked
Not stated

Similar roles usually ask 5+ years.

Skills these teams ask for most

  • ✓ Team leadership 50%
  • Machining 22%
  • Tooling 22%
  • ✓ Root cause 22%
  • Welding 22%

✓ = this posting asks for it too. % = share of similar postings that mention it.

Stands out: this posting asks for Value stream mapping, Capacity planning, which few similar roles mention. If you have it, lead with it.

At a glance

Promotion path mentioned

Pulled from the posting text. If it's not listed here, the posting didn't say.

How to get in at this plant

Five moves over a week or two. The first one takes ten minutes.

  1. 1

    Pick 2–3 people on the Manufacturing team at nLIGHT

    Engineers who joined in the last year or two reply the most. Use the team search on this page to find them.

  2. 2

    Send a short, curious note

    One real question about their work. No favors yet. Each person gets a different note, written for this role.

  3. 3

    Turn a reply into a short call

    Questions worth asking about this team:

    • What does a normal week look like on your team?
    • Is the work mostly new product launches or sustaining existing lines?
    • How much time do you spend on the floor versus at a desk?
    • How did you land the job? What stood out in your interviews?
  4. 4

    Apply with someone vouching for you

    If the call went well, ask whether they’d pass your résumé to the hiring manager. Send your résumé link, apply that day, and let them know.

  5. 5

    Bring proof to the interview

    One page of before-and-after numbers from projects you led: scrap, OEE, cycle time, cost. Plant managers hire on results.

Full description from nLIGHTAs posted on their careers site.Show

Position Summary

nLIGHT is seeking an experienced Manufacturing Supervisor II to lead swing-shift production operations in our fast-paced, high-volume manufacturing environment. This role is responsible for creating a safe and inclusive workplace, developing employees, and achieving safety, quality, delivery, cost, and productivity goals. As the primary operations leader during assigned swing-shift hours, the Manufacturing Supervisor II provides timely direction, resolves production constraints, coordinates resources across functions and shifts, and leads sustainable continuous-improvement efforts. This position works onsite at nLIGHT’s Camas, Washington facility and partners closely with Operations, Manufacturing Engineering, Quality, Equipment, Human Resources, and other support teams.

Responsibilities

  • ◆Leads swing-shift production operations and serves as the primary escalation point for a team of approximately 20 or more manufacturing specialists, leads, technicians, and other production employees.
  • ◆Maintains a safe, inclusive, and compliant workplace by reinforcing safe work practices; addressing hazards; supporting incident investigations; and ensuring adherence to company policies, manufacturing procedures, quality-system requirements, cleanroom and ESD protocols, and applicable laws and regulations.
  • ◆Reviews production priorities, staffing, equipment status, material availability, and constraints; adjusts resources and workflow to meet safety, quality, delivery, cost, yield, throughput, labor-efficiency, scrap, rework, and schedule-attainment goals.
  • ◆Coordinates across production areas, departments, and shifts to resolve manufacturing, equipment, material, and quality constraints and ensures accurate, timely shift handoffs and follow-up.
  • ◆Assigns work, communicates priorities and results, leads daily manufacturing meetings, and holds employees accountable for performance, attendance, quality, safety, and compliance.
  • ◆Builds team capability through recruiting, onboarding, qualification planning, cross-training, coaching, recognition, performance reviews, career development, and succession planning using nLIGHT’s Skill, Will, and Fit framework.
  • ◆Addresses attendance, conduct, employee complaints, conflict, and corrective action consistently and in partnership with Operations leadership and Human Resources; reviews and approves time and attendance records accurately and on time.
  • ◆Leads structured problem-solving and continuous-improvement efforts using Lean manufacturing, 5S, root-cause analysis, value-stream mapping, standard work, and continuous-flow principles to improve processes, equipment performance, product quality, productivity, and cost.
  • ◆Supports staffing and capacity planning and performs other duties to meet production and business needs as assigned.

Required

  • ✓Three or more years of manufacturing leadership experience with responsibility for directing employees, managing performance, and achieving operational goals.
  • ✓Five or more years of experience in a high-volume or technically complex manufacturing environment, with increasing responsibility and demonstrated hands-on problem-solving ability.
  • ✓Demonstrated experience leading a team of comparable size and operational complexity.
  • ✓Experience monitoring production metrics, assessing performance gaps, and implementing effective corrective actions.
  • ✓Working knowledge of Lean manufacturing, 5S, root-cause analysis, standard work, and structured problem-solving methods.
  • ✓Experience resolving manufacturing constraints and coordinating effectively across Operations, Engineering, Quality, Equipment, and other support functions.
  • ✓Demonstrated ability to coach employees, provide clear feedback, manage conflict, and apply policies and expectations consistently.
  • ✓Strong written, verbal, listening, and interpersonal communication skills, with the ability to work effectively with employees at all levels of the organization.
  • ✓Commitment to maintaining a safe workplace and reinforcing safe behaviors, quality standards, and procedural compliance.
  • ✓Proficiency with Microsoft Office applications, including Word, Excel, PowerPoint, and Outlook.
  • ✓Ability to work onsite during the assigned swing-shift schedule and provide additional coverage outside regular hours when required by business needs.
  • ✓Ability to work in cleanroom and ESD-controlled environments where products are fabricated, assembled, and tested.

Requirements

  • ✓Ability to regularly work on the production floor and move between office, manufacturing, cleanroom, and labora
Show full description ↓

Who We Are

At nLIGHT, we are constantly on the cutting edge of laser technology in dynamic and growing markets. We are a leading provider of high-power semiconductor and fiber lasers for industrial, microfabrication, and aerospace and defense applications. Our lasers are changing not only the way things are made, but also the things that can be made. Headquartered in Camas, Washington, nLIGHT is a publicly listed company (NASDAQ: LASR).

Preferred

  • +Bachelor’s degree in engineering, science, operations, business, or a related field, or an equivalent combination of education and relevant experience.
  • +Leadership experience in semiconductor, photonics, optics, electronics, precision-fabrication, or other advanced manufacturing operations.
  • +Hands-on experience with assembly, precision fabrication, product-quality testing, or cleanroom manufacturing.
  • +Lean or Six Sigma training or certification.
  • +Experience using an enterprise resource planning, manufacturing execution, or production-reporting system.

Schedule

Swing Shift: Tuesday–Saturday, 5:00 p.m.–1:30 a.m. This is a full-time, exempt position working onsite at nLIGHT’s Camas location. The role requires coordination with other shifts and flexibility to work additional hours outside the regular schedule when needed to support production, employees, safety, or other business requirements.

Physical

More Manufacturing roles nearby