ShopFloorJobs
SC

Senior Manufacturing Engineer

Skutt Ceramic Products, Inc. · Portland, OR

Level
Level: Senior
Team
Team: Manufacturing
Base pay
Base pay: $120k–$135k
Degree
Degree: Required (or equivalent experience)
Experience asked
Experience asked: 8+ years
Industry
Industry: Industrial
Posted
Posted: 20 days ago
Apply on Skutt ↗

The role in 30 seconds

A senior manufacturing role at Skutt Ceramic Products, Inc. (industrial) in Portland, OR. You will share your knowledge with engineers, supervisors, and operators to strengthen the capabilities of the team around you.

They ask for
8+ years · degree required (or equivalent experience)
Tools it names
Lean, 5S, Value stream mapping, Root cause, GD&T, Validation (IQ/OQ/PQ)
Base pay
$120k–$135k

Read from the posting. The full description is below.

From the plant jobs report · week of November 16, 2026

Manufacturing Engineer roles in Oregon: typical posted base $120k–$135k. This one lists $120k–$135k.

Median of the low and high ends of 10 live postings that list pay, out of 43 manufacturing engineer openings in Oregon, read from manufacturers' own careers sites.

Oregon plant jobs report →Pay by team and state →What moves pay →

How this role compares

Against 42 other live manufacturing postings in Oregon.

Base pay
About 12% above similar roles

Typical $96k–$131k, from 8 postings that list pay.

Experience asked
More than usual (8+ vs 5+)

Similar roles usually ask 5+ years.

Skills these teams ask for most

  • ✓ Root cause 51%
  • ✓ Automation 47%
  • ✓ Lean 26%
  • ✓ Validation (IQ/OQ/PQ) 23%
  • SPC 21%
  • ✓ Robotics 21%

✓ = this posting asks for it too. % = share of similar postings that mention it.

Stands out: this posting asks for Value stream mapping, GD&T, PLC, CNC, which few similar roles mention. If you have it, lead with it.

It asks for 8+ years. If you're close, apply anyway: requirements are a wish list. Talk to someone doing this work there first.

At a glance

Pulled from the posting text. If it's not listed here, the posting didn't say.

How to get in at this plant

Five moves over a week or two. The first one takes ten minutes.

  1. 1

    Pick 2–3 people on the Manufacturing team at Skutt Ceramic Products, Inc.

    Engineers who joined in the last year or two reply the most. Use the team search on this page to find them.

  2. 2

    Send a short, curious note

    One real question about their work. No favors yet. Each person gets a different note, written for this role.

  3. 3

    Turn a reply into a short call

    Questions worth asking about this team:

    • What does a normal week look like on your team?
    • Is the work mostly new product launches or sustaining existing lines?
    • How much time do you spend on the floor versus at a desk?
    • How did you land the job? What stood out in your interviews?
  4. 4

    Apply with someone vouching for you

    If the call went well, ask whether they’d pass your résumé to the hiring manager. Send your résumé link, apply that day, and let them know.

  5. 5

    Bring proof to the interview

    One page of before-and-after numbers from projects you led: scrap, OEE, cycle time, cost. Plant managers hire on results.

Full description from Skutt Ceramic Products, Inc.As posted on their careers site.Show

Key Responsibilities

  • ◆Provide hands-on technical support to the production floor, troubleshooting process and equipment issues and resolving them at the root
  • ◆Own manufacturing engineering projects from concept through implementation, delivering measurable results in cost, quality, throughput, and safety
  • ◆Identify improvement opportunities and present data-driven recommendations, including ROI and payback, to inform continuous improvement priorities
  • ◆Lead root cause analysis and corrective action for production and quality issues using structured problem-solving methods (e.g., 8D, 5 Why, fishbone)
  • ◆Plan and execute equipment and process projects, including specification, vendor coordination, installation, and validation
  • ◆Support new product introductions (NPI), partnering with design to optimize manufacturability and ensure a smooth transition to full-scale production
  • ◆Apply lean manufacturing tools such as standard work, 5S, value stream mapping, and setup reduction to reduce waste and improve flow
  • ◆Partner with Quality to strengthen process controls, inspection methods, and corrective actions
  • ◆Analyze production data to identify trends, establish meaningful metrics, and drive corrective actions
  • ◆Develop and maintain work instructions, process documentation, and SOPs that set a high standard for clarity and consistency
  • ◆Own the creation and maintenance of manufacturing bills of materials (BOMs), ensuring accuracy and controlled changes, and coordinating updates with design, purchasing, and production
  • ◆Serve as a technical mentor to the engineering team, and share expertise with supervisors and operators to build problem-solving capability across the floor
  • ◆Work with maintenance to improve equipment reliability and minimize downtime
  • ◆Train operators and technicians on best practices and new manufacturing processes
  • ◆Support line layout, capacity planning, and make-vs-buy evaluations as volume and product mix change

Position

Qualifications

  • ✓Bachelor’s degree in Manufacturing, Industrial, or Mechanical Engineering, or equivalent experience
  • ✓8+ years of experience in a manufacturing or process engineering role with strong factory floor presence
  • ✓Proven track record of measurable results, such as cost savings, scrap reduction, or throughput improvement
  • ✓Strong problem-solving skills with deep experience in root cause analysis and corrective actions
  • ✓Working knowledge of lean manufacturing and continuous improvement methodologies
  • ✓Experience planning and executing process or equipment projects from concept through implementation
  • ✓Experience creating and maintaining accurate manufacturing BOMs, including change control
  • ✓Experience mentoring or training engineers, technicians, or operators
  • ✓Proficiency in SolidWorks and manufacturing data analysis tools
  • ✓Proficiency in interpreting and applying GD&T standards to ensure accurate part specifications and compliance
  • ✓Breadth of experience across multiple areas and comfort wearing many hats in a small-company environment
  • ✓Strong communication skills, including the ability to explain technical concepts clearly to non-engineers
  • ✓Hands-on approach with a willingness to be on the production floor solving problems
  • ✓Ability to work effectively in a fast-paced production environment with multiple priorities

Preferred Qualifications

  • ✓Experience with UL/CSA-listed products and related compliance

requirements

  • ✓Lean manufacturing certifications/experience
  • ✓Experience with automation, PLCs, or robotic systems in a manufacturing environment
  • ✓Knowledge of ERP/MRP systems and manufacturing planning
  • ✓Experience at a small or mid-size manufacturer
Show full description ↓

Job Overview

We are seeking a Senior Manufacturing Engineer who brings deep, hands-on experience and the judgment to match. You will own the outcomes of your work from start to finish, identify improvement opportunities backed by data, and help set the technical direction for how we build our products. As a go-to technical resource, you will share your knowledge with engineers, supervisors, and operators to strengthen the capabilities of the team around you. This is an individual contributor role reporting to the CI/Engineering Supervisor.

Our operations center on general assembly, supported by refractory brickwork, sheet metal fabrication, machine operation, CNC operation, welding, electrical assembly and wiring, and testing and packaging of our kilns and pottery wheels.

This is a chance to make a meaningful impact as an individual contributor. Your work on our small engineering team will span multiple facets of the business, from the production floor to new product development to quality. You’ll see the results of your decisions firsthand rather than being just another engineer at a larger company.

Details

Job Type: Full-time, Monday thru Friday

Shift: 7:00 AM – 4:00 PM (1 hr. lunch)

Salary: $120,000–$135,000, depending on experience depending on experience

Bonus Opportunities

Employer-Paid Benefit Package (Medical/Dental/401K Matching/Vacation)

More Manufacturing roles nearby