ShopFloorJobs
S

Sr. Manufacturing Process Engineer

Straumann · Round Rock, TX

Level
Level: Senior
Team
Team: Process
Base pay
Base pay: $85k–$95k
Degree
Degree: Required
Experience asked
Experience asked: 3+ years
Industry
Industry: Industrial
Posted
Posted: 6 days ago
Apply on Straumann ↗

The role in 30 seconds

A senior process role at Straumann (industrial) in Round Rock, TX. In addition to driving process efficiency, quality, and compliance, you will lead cross-functional improvement initiatives, support production planning through capacity management and manufacturing readiness reviews, and mentor engineering teams.

They ask for
3+ years · degree required
Tools it names
Lean, Six Sigma, Root cause, SPC, FMEA, ISO 13485
Base pay
$85k–$95k

Read from the posting. The full description is below.

From the plant jobs report · week of November 16, 2026

Process Engineer roles in Texas: typical posted base $85k–$145k. This one lists $85k–$95k.

Median of the low and high ends of 29 live postings that list pay, out of 141 process engineer openings in Texas, read from manufacturers' own careers sites.

Texas plant jobs report →Pay by team and state →What moves pay →

How this role compares

Against 140 other live process postings in Texas.

Base pay
About 22% below similar roles

Typical $85k–$145k, from 28 postings that list pay.

Experience asked
Less than usual (3+ vs 5+)

Similar roles usually ask 5+ years.

Skills these teams ask for most

  • ✓ SPC 42%
  • ✓ Root cause 38%
  • DOE 24%
  • New product launch 23%
  • ✓ Automation 21%
  • ✓ FMEA 21%

✓ = this posting asks for it too. % = share of similar postings that mention it.

Stands out: this posting asks for ISO 13485, FDA / GMP, Machining, Time studies, which few similar roles mention. If you have it, lead with it.

It asks for 3+ years. If you're close, apply anyway: requirements are a wish list. Talk to someone doing this work there first.

At a glance

Pulled from the posting text. If it's not listed here, the posting didn't say.

How to get in at this plant

Five moves over a week or two. The first one takes ten minutes.

  1. 1

    Pick 2–3 people on the Process team at Straumann

    Engineers who joined in the last year or two reply the most. Use the team search on this page to find them.

  2. 2

    Send a short, curious note

    One real question about their work. No favors yet. Each person gets a different note, written for this role.

  3. 3

    Turn a reply into a short call

    Questions worth asking about this team:

    • What does a normal week look like on your team?
    • Is the work mostly new product launches or sustaining existing lines?
    • How much time do you spend on the floor versus at a desk?
    • How did you land the job? What stood out in your interviews?
  4. 4

    Apply with someone vouching for you

    If the call went well, ask whether they’d pass your résumé to the hiring manager. Send your résumé link, apply that day, and let them know.

  5. 5

    Bring proof to the interview

    One page of before-and-after numbers from projects you led: scrap, OEE, cycle time, cost. Plant managers hire on results.

Full description from StraumannAs posted on their careers site.Show

Essential Functions and Duties

As a Senior Manufacturing Process Engineer, you will be regarded as a deep expert related to Orthodontics with broad knowledge of related fields. In this role, you will

  • ◆Evaluate and analyze existing manufacturing processes, identifying areas for improvement in terms of productivity, cost-effectiveness, and quality
  • ◆Develop and implement process improvements to enhance product quality, reduce waste, and increase efficiency
  • ◆Collaborate with product development teams to ensure manufacturability of new orthodontic products, providing input on design for manufacturability (DFM) principles
  • ◆Design and develop manufacturing processes, including assembly, machining, molding, and finishing, ensuring compliance with regulatory and quality standards
  • ◆Conduct time studies, capacity analysis, and line balancing to optimize production flow and maximize throughput
  • ◆Provide technical support and troubleshooting for manufacturing issues, working closely with production personnel to resolve problems and minimize downtime
  • ◆Implement lean manufacturing principles and continuous improvement initiatives to drive operational excellence
  • ◆Develop and maintain manufacturing work instructions, standard operating procedures (SOPs), and other documentation to ensure process consistency and compliance
  • ◆Collaborate with the quality assurance team to develop and execute process validation protocols and perform statistical process control (SPC) analysis
  • ◆Stay updated on industry trends, technological advancements, and best practices in orthodontic manufacturing processes
  • ◆Lead manufacturing capacity reviews and production readiness planning, partnering with Operations and Supply Chain teams to ensure adequate resources, equipment utilization, and long-term manufacturing capability. (5%)
  • ◆Facilitate and lead cross-functional engineering meetings, driving alignment between Manufacturing, Quality, Operations, Maintenance, and Product Development teams to resolve technical challenges and support strategic objectives. (5%)
  • ◆Provide technical leadership and mentorship to Process Engineers and Manufacturing Technicians, promoting best practices, problem-solving methodologies, and continuous development of engineering capabilities. (5%)
  • ◆Lead complex manufacturing projects and site-wide improvement initiatives, managing timelines, risks, stakeholder communication, and implementation activities to achieve operational goals. (5%)
  • ◆Develop manufacturing strategies and technology roadmaps to support future growth, automation opportunities, and operational excellence initiatives. (5%)

Non-essential Functions and Duties

  • ◆Perform other related duties and

responsibilities

as assigned

  • ◆Stays current with various material removal, inspection, and manufacturing system technologies and philosophies

Qualifications

  • ✓Bachelor's degree in Mechanical Engineering, Industrial Engineering, or a related field. Advanced degree is a plus
  • ✓3+ years’ experience in manufacturing process engineering and GMP, preferably in the orthodontics or medical device industry
  • ✓2+years’ experience with CAD/CAM software and knowledge of design for manufacturability (DFM) principles
  • ✓1+years’ regulatory

requirements

and quality standards relevant to orthodontic device manufacturing (e.g., FDA regulations, ISO 13485)

Preferred Qualifications

  • ✓Knowledge of manufacturing processes, such as assembly, machining, molding, and finishing, specific to orthodontic devices
  • ✓Photopolymer Additive manufacturing DLP, SLA or other additive manufacturing processes experience preferred
  • ✓Proficiency in applying lean manufacturing principles, process optimization techniques, and statistical analysis tools
  • ✓Understanding 6 sigma tools like fish-bone diagrams, 5 Whys approach, PFMEA, SPC, root cause analysis, Lean manufacturing etc
  • ✓Detail-oriented with a focus on quality and continuous improvement
  • ✓Excellent problem-solving skills and ability to analyze complex manufacturing issues
  • ✓Strong communication and collaboration skills to work effectively with cross-functional teams

Salary: $85,000–$95,000 /Annually. The final pay for this position will vary based on geographic location and candidate experience relative to what the company reasonably anticipates for this position.

Show full description ↓

Ready to make an impact?

We develop, manufacture, and supply dental implants, clear aligners, instruments, CADCAM prosthetics and biomaterials for use in esthetic dentistry, tooth replacement and restoration solutions or to prevent tooth loss.

We empower our employees to perform and make an impact, to question the status quo, to drive change, to stay ahead of the competition. From the first Dental Implant in 1974 to the latest Digital Solution – we do things differently than others

We deliver innovation based on evidence. This is part of our employer culture as well as an exceptional team spirit that truly encourages diversity and a powerful “can-do” attitude.

#WeChangeDentistry every day. Be part of it.

Summary of Position

As a Senior Manufacturing Process Engineer, you will provide technical leadership in the development, optimization, and scaling of manufacturing processes for orthodontic device production. In addition to driving process efficiency, quality, and compliance, you will lead cross-functional improvement initiatives, support production planning through capacity management and manufacturing readiness reviews, and mentor engineering teams. You will collaborate closely with Operations, Quality, Supply Chain, Product Development, and Site Leadership to ensure manufacturing performance aligns with business objectives while supporting innovation, operational excellence, and long-term growth strategies.

Additional Information

Whether you’re looking to build your career, improve your health, or brighten your SMILE, we offer generous benefits to help you achieve your goals.

  • •Very Competitive total compensa

More Process roles nearby