Engineer- Manufacturing Principal USA
LED FastStart · New Iberia, LA
- Level
- Level: Senior
- Team
- Team: Manufacturing
- Degree
- Degree: Required (or equivalent experience)
- Experience asked
- Experience asked: 8+ years
- Industry
- Industry: Industrial
- Posted
- Posted: 2 days ago
The role in 30 seconds
A senior manufacturing role at LED FastStart (industrial) in New Iberia, LA.
- They ask for
- 8+ years · degree required (or equivalent experience)
- Tools it names
- Six Sigma, SPC, FMEA, Minitab
Read from the posting. The full description is below.
From the plant jobs report · week of November 16, 2026
Manufacturing Engineer roles in the US: typical posted base $96k–$145k.
Median of the low and high ends of 935 live postings that list pay, out of 2672 manufacturing engineer openings in the US, read from manufacturers' own careers sites.
Louisiana plant jobs report →Pay by team and state →What moves pay →
How this role compares
Against 17 other live manufacturing postings in Louisiana.
- Experience asked
- More than usual (8+ vs 7+)
Similar roles usually ask 7+ years.
Skills these teams ask for most
- ✓ Team leadership 33%
- ✓ Six Sigma 33%
- Root cause 33%
- ✓ SPC 28%
- Lean 28%
- Tooling 22%
✓ = this posting asks for it too. % = share of similar postings that mention it.
Stands out: this posting asks for Minitab, which few similar roles mention. If you have it, lead with it.
At a glance
Pulled from the posting text. If it's not listed here, the posting didn't say.
How to get in at this plant
Five moves over a week or two. The first one takes ten minutes.
- 1
Pick 2–3 people on the Manufacturing team at LED FastStart
We found 1 person at this company and state: 1 leaders. Engineers who joined in the last year or two reply the most. See them ↓
- 2
Send a short, curious note
One real question about their work. No favors yet. Each person gets a different note, written for this role.
Write to Mark → (free) - 3
Turn a reply into a short call
Questions worth asking about this team:
- What does a normal week look like on your team?
- Is the work mostly new product launches or sustaining existing lines?
- How much time do you spend on the floor versus at a desk?
- How did you land the job? What stood out in your interviews?
- 4
Apply with someone vouching for you
If the call went well, ask whether they’d pass your résumé to the hiring manager. Send your résumé link, apply that day, and let them know.
- 5
Bring proof to the interview
One page of before-and-after numbers from projects you led: scrap, OEE, cycle time, cost. Plant managers hire on results.
This plant: LED FastStart in New Iberia
4 other open roles at this site · 1 person we found in manufacturing roles at LED FastStart.
- Technician- Manufacturing Engineer I USA · Manufacturing
- Engineer- Operations I USA · Production
- Engineer- Manufacturing Systems I USA · Manufacturing
- Engineer- Controls II USA · Controls
Full description from LED FastStartAs posted on their careers site.ShowHide
Education/Experience
- ✓Bachelors/Masters/PhD Degree in Engineering Discipline or Physical Science Field or equivalent.
- ✓>8 years process engineering and/or R&D experience in a manufacturing environment; will usually have a broad engineering and technology background.
- ✓Fluent with statistical analysis methods and tools and structured problem solving; Adept at analyzing big datasets using tools like JMP or Minitab
- ✓Experience in Photovoltaics Manufacturing Flow or Technology Development experience in the broad fields of Thin Film Vacuum Deposition, Glass Therm-Mechanical Processing, Module Packaging and Structural Development, Semiconductor Processes, Electrical Device Integration
- ✓Good familiarity with Materials Analysis methods like optical and x-ray spectroscopy, microscopy and electrical characterization to be able to leverage the same in troubleshooting
- ✓Demonstrated ability to lead small technical teams including goal setting and performance management
Required Skills/Competencies
- ✓Demonstration ofleadership skills in small teams in a localized environment. This typically involves experience directly supervising a small team of engineers and technicians.
- ✓Knowledge of Manufacturing Processes.
- ✓Knowledge of Manufacturing Engineering Techniques and Practices.
- ✓Knowledge of ISO 9000 standards and SPC tools.
- ✓Robust Engineering, Six Sigma.
- ✓Able to lead creation of and improvements to PFMEA.
- ✓Proven quality Skills.
- ✓Proven Technical Problem-solving skills.
- ✓Possess excellent data analysis and collection skills.
- ✓Knowledge of MS Office suite and statistical software.
- ✓Written and oral communication skills with ability to create presentations suitable for sharing with executive and C-level staff.
- ✓Demonstrated expertise in driving projects through Change Management systems.
- ✓Demonstrated expertise in engineering test/experimental design, execution, and interpretation of results.
Essential
Responsibilities
- ◆Responsible to develop, continually improve, and document robust solar module manufacturing processes to achieve the highest product performance in a cost-efficient manner.
- ◆Perform in-depth investigations into process issues.
- ◆Evaluate new proposed equipment according to process standards.
- ◆Reviews process experiment proposals and subsequent results.
- ◆Defines and implements corrective/preventive actions and continuous improvement activities as assigned.
- ◆Adheres to all safety procedures and good housekeeping standards.
- ◆Lead mainly local task forces and project teams.
- ◆Able to influence up to director level globally.
- ◆Work cross functionally and drive decisions mainly at the local level.
- ◆Directly and indirectly manage a technical staff up to and including senior engineer level.
- ◆Other duties as assigned.
- ◆Job description subject to change at any time.
Requirements
- ✓Will sit, stand or walk short distances for up to the entire duration of a shift.
- ✓Will climb stairs on an occasional basis.
- ✓Will lift, push or pull up to 37 pounds on an occasional basis.
- ✓Required to use hands to grasp, lift, handle, carry or feel objects on a frequent basis.
- ✓20/40 vision in both eyes together, with or without correction, is required.
- ✓Must be able to comply with all safety standards and procedures.
- ✓May reach above shoulder heights and below the waist on a frequent basis.
- ✓May stoop, kneel, or bend, on an occasional basis.
- ✓Ability to wear personal protective equipment is required (including but not limited to; steel-toed shoes, gloves, safety glasses, hearing protection, protective jacket or apron and arm guards, and a condition of employment and continued employment (requires little or no facial hair) for those requiring respirator use.
requirements
provided on the above job description and excel in completing the listed
responsibilities
for this role. All candidates receiving an offer of employment must successfully complete a background check and any other tests that may be required.
Show full description ↓Show less ↑
First Solar reserves the right to offer you a role most applicable to your experience and skillset.
Basic Job Functions
Lead process or equipment improvement under the oversight of respective Area Manager or Sr. Managers to meet Manufacturing P90 metrics. Manage and lead group of engineers and/ or technicians either directly or through the course of a project/assignment. Work with stakeholders like Development Engineering, Global Supply Chain or Quality & Reliability to resolve technical problems and develop robust manufacturing processes. Initiate and lead complex equipment or process changes following CMS stage-gate process and work with Global Alignment Team counterparts to successfully replicate the changes.
Reporting Relationships
- •This position will not have direct reports.
Travel
- •No travel is required.
- •0% - 5% (On occasion/as needed for training, etc.)
