ShopFloorJobs
AC

Quality Control Technician

AMA-ALU CORP · Hatfield, MA

Level
Level: Technician
Team
Team: Quality
Experience asked
Experience asked: 5+ years
Industry
Industry: Industrial
Posted
Posted: Recently
Apply on AMA-ALU CORP ↗

The role in 30 seconds

A technician-level quality role at AMA-ALU CORP (industrial) in Hatfield, MA. Maintain a clean, organized inspection area and protect inspection equipment from damage or contamination.

They ask for
5+ years
Tools it names
Root cause, FDA / GMP, Internal audits, Painting / coating

Read from the posting. The full description is below.

From the plant jobs report · week of November 16, 2026

Quality Technician roles in the US: typical posted base $53k–$75k.

Median of the low and high ends of 44 live postings that list pay, out of 639 quality technician openings in the US, read from manufacturers' own careers sites.

Massachusetts plant jobs report →Pay by team and state →What moves pay →

How this role compares

Against 23 other live quality postings in Massachusetts.

Experience asked
More than usual (5+ vs 3+)

Similar roles usually ask 3+ years.

Skills these teams ask for most

  • ISO 9001 29%
  • ✓ Root cause 25%
  • Validation (IQ/OQ/PQ) 25%
  • GD&T 25%
  • Team leadership 25%
  • ✓ FDA / GMP 21%

✓ = this posting asks for it too. % = share of similar postings that mention it.

Stands out: this posting asks for Painting / coating, which few similar roles mention. If you have it, lead with it.

It asks for 5+ years. If you're close, apply anyway: requirements are a wish list. Talk to someone doing this work there first.

At a glance

Lifts up to 50 lbs

Pulled from the posting text. If it's not listed here, the posting didn't say.

How to get in at this plant

Five moves over a week or two. The first one takes ten minutes.

  1. 1

    Pick 2–3 people on the Quality team at AMA-ALU CORP

    Engineers who joined in the last year or two reply the most. Use the team search on this page to find them.

  2. 2

    Send a short, curious note

    One real question about their work. No favors yet. Each person gets a different note, written for this role.

  3. 3

    Turn a reply into a short call

    Questions worth asking about this team:

    • What does a normal week look like on your team?
    • Which standards drive the work here: ISO 13485, IATF 16949, AS9100?
    • How much of the job is customer complaints versus prevention?
    • How did you land the job? What stood out in your interviews?
  4. 4

    Apply with someone vouching for you

    If the call went well, ask whether they’d pass your résumé to the hiring manager. Send your résumé link, apply that day, and let them know.

  5. 5

    Bring proof to the interview

    One page of before-and-after numbers from projects you led: scrap, OEE, cycle time, cost. Plant managers hire on results.

Full description from AMA-ALU CORPAs posted on their careers site.Show

Responsibilities

  • ◆Perform visual, dimensional, and functional inspections of raw materials, in-process product, and finished goods according to approved specifications and sampling plans.
  • ◆Use inspection and measurement tools such as calipers, micrometers, gauges, scales, templates, and other approved devices.
  • ◆Verify product dimensions, appearance, trim, flange, depth, diameter, wall condition, coating/finish, stacking/nesting, and other characteristics as applicable.
  • ◆Identify common defects including dents, deformation, cracks, splits, pinholes, burrs, sharp edges, contamination, incorrect dimensions, surface defects, mixed product, and packaging errors.
  • ◆Place suspect or nonconforming product on hold, identify and segregate affected material, and notify the appropriate Production and Quality personnel.
  • ◆Complete inspection records, quality logs, hold tags, traceability records, nonconformance documentation, and related forms accurately and on time.
  • ◆Verify lot, batch, material, work-order, and product identification information to support traceability.
  • ◆Conduct startup, first-piece, in-process, changeover, and final inspections as required.
  • ◆Monitor production processes and communicate trends or recurring defects to Production and Quality leadership.
  • ◆Support investigations, root-cause analysis, corrective actions, and verification of corrective-action effectiveness.
  • ◆Assist with gauge verification, calibration status checks, and control of inspection equipment.
  • ◆Support customer complaint investigations and internal quality reviews as assigned.
  • ◆Participate in internal audits, GMP inspections, housekeeping inspections, and other quality-system activities.
  • ◆Follow document-control

requirements

and use only current approved specifications, work instructions, forms, and procedures.

  • ✓Maintain a clean, organized inspection area and protect inspection equipment from damage or contamination.
  • ✓Follow AMA-ALU Food Safety, GMP, sanitation, safety, PPE, and security requirements.
  • ✓Immediately escalate any food-safety, product-safety, quality, traceability, or regulatory concern.
  • ✓Perform other quality-related duties as assigned by the Quality Manager or management.
  • ✓Quality Authority
  • ✓The Quality Technician is authorized and expected to stop, hold, or escalate product or production when there is a reasonable concern that product does not meet approved specifications, may be contaminated, may create a food-safety or product-safety concern, or cannot be properly traced.
  • ✓AMA-ALU Quality Principle: DO NOT MAKE, ACCEPT, OR PASS A DEFECT FORWARD.
  • ✓Required Knowledge, Skills and Abilities
  • ✓Ability to read and understand product specifications, work instructions, quality standards, and inspection criteria.
  • ✓Basic math skills, including decimals, fractions, measurement conversion, and comparison to tolerances.
  • ✓Ability to use precision measuring and inspection equipment accurately.
  • ✓Strong attention to detail and ability to identify small visual or dimensional differences.
  • ✓Ability to document inspection results clearly, accurately, and legibly.
  • ✓Ability to communicate professionally with Production, Maintenance, Warehouse, and management.
  • ✓Ability to recognize when a condition requires escalation rather than independent disposition.
  • ✓Basic computer skills and ability to use spreadsheets, quality systems, or electronic records as assigned.
  • ✓Ability to work independently while maintaining consistent inspection discipline.
  • ✓Ability to manage multiple priorities in a fast-paced manufacturing environment.
  • ✓Education and Experience
  • ✓High school diploma or GED required.
  • ✓3-5 years of quality inspection, manufacturing, food packaging, metal forming, or production experience preferred.
  • ✓Experience using calipers, micrometers, gauges, or similar measurement tools preferred.
  • ✓Knowledge of GMP, food safety, ISO-style quality systems, traceability, nonconforming-product control, or root-cause analysis is preferred.
  • ✓Equivalent combinations of education, training, and relevant experience may be considered.
  • ✓Physical

Requirements

  • ✓Standing / Walking: Frequently; may stand or walk for extended periods while inspecting production areas and finished goods.
  • ✓Sitting: Occasionally to frequently for documentation, data entry, review, and administrative quality work.
  • ✓Lifting / Carrying: Must be able to lift and carry up to 50 pounds occasionally and up to 25 pounds more frequently, with assistance or mechanical aid used when appropriate.
  • ✓Pushing / Pulling: Occasionally, including moving samples, carts, totes, inspection materials, or product containers within safe limits.
  • ✓Bending / Stooping / Crouching: Occasionally to inspect lower machine areas, pallets, product, or stored materials.
  • ✓Reaching: Frequently at waist and chest level; occasionally above shoulder level.
  • ✓Hands / Fingers: Frequent use for handling samples, measuring devices, tools, labels, paperwork, keyboards, and touchscreens.
  • ✓Vision: Must be able to perform close visual inspection, distinguish product defects, read gauges and measurements, and review printed/electronic specifications.
  • ✓Hearing / Communication: Must be able to communicate in a manufacturing environment and respond to alarms, instructions, and safety communications
Show full description ↓

About the Role: The Quality Technician supports AMA-ALU Corporation's quality system by performing in-process and finished-product inspections, verifying product conformance to customer and internal requirements, maintaining accurate quality records, identifying and containing nonconforming material, and supporting corrective-action and continuous-improvement activities. The position works closely with Production, Maintenance, Warehouse, and Quality leadership to help ensure aluminum food-contact containers and related products are produced safely, consistently, and in accordance with approved specifications.

  • •Essential Duties and

More Quality roles nearby