ShopFloorJobs
PS

Director of Equipment Engineering - Premier PV

Primoris Services Corporation · Dallas, GA

Level
Level: Director+
Team
Team: Manufacturing
Travel
Travel: 30%
Degree
Degree: Preferred
Experience asked
Experience asked: 15+ years
Industry
Industry: Industrial
Posted
Posted: Recently
Apply on Primoris ↗

The role in 30 seconds

A director-level manufacturing role at Primoris Services Corporation (industrial) in Dallas, GA. Specify, source, and qualify manufacturing equipment including: Automated and semi-automated assembly systemsWire processing and crimping equipmentInjection molding and overmolding systemsLead equipment validation (FAT, SAT, IQ/OQ/PQ).Ensure.

They ask for
15+ years · degree preferred
Tools it names
Six Sigma, TPM, OEE, SMED, Root cause, CAPA
Day to day
about 30% travel

Read from the posting. The full description is below.

From the plant jobs report · week of November 16, 2026

Manufacturing Engineer roles in Georgia: typical posted base $95k–$158k.

Median of the low and high ends of 23 live postings that list pay, out of 59 manufacturing engineer openings in Georgia, read from manufacturers' own careers sites.

Georgia plant jobs report →Pay by team and state →What moves pay →

How this role compares

Against 58 other live manufacturing postings in Georgia.

Base pay
Not listed in this posting

Typical $89k–$148k, from 21 postings that list pay.

Experience asked
More than usual (15+ vs 7+)

Similar roles usually ask 7+ years.

Skills these teams ask for most

  • ✓ Tooling 46%
  • ✓ Automation 41%
  • ✓ Root cause 34%
  • Lean 34%
  • Cost reduction 29%
  • ✓ Validation (IQ/OQ/PQ) 27%

✓ = this posting asks for it too. % = share of similar postings that mention it.

Stands out: this posting asks for TPM, OEE, SMED, CAPA, which few similar roles mention. If you have it, lead with it.

It asks for 15+ years. If you're close, apply anyway: requirements are a wish list. Talk to someone doing this work there first.

At a glance

Pulled from the posting text. If it's not listed here, the posting didn't say.

How to get in at this plant

Five moves over a week or two. The first one takes ten minutes.

  1. 1

    Pick 2–3 people on the Manufacturing team at Primoris Services Corporation

    Engineers who joined in the last year or two reply the most. Use the team search on this page to find them.

  2. 2

    Send a short, curious note

    One real question about their work. No favors yet. Each person gets a different note, written for this role.

  3. 3

    Turn a reply into a short call

    Questions worth asking about this team:

    • What does a normal week look like on your team?
    • Is the work mostly new product launches or sustaining existing lines?
    • How much time do you spend on the floor versus at a desk?
    • The posting says about 30% travel. Between which sites?
    • How did you land the job? What stood out in your interviews?
  4. 4

    Apply with someone vouching for you

    If the call went well, ask whether they’d pass your résumé to the hiring manager. Send your résumé link, apply that day, and let them know.

  5. 5

    Bring proof to the interview

    One page of before-and-after numbers from projects you led: scrap, OEE, cycle time, cost. Plant managers hire on results.

Full description from Primoris Services CorporationAs posted on their careers site.Show

Key Responsibilities

Greenfield Facility Build & RampLead equipment engineering and maintenance strategy from concept through full production ramp.

Partner with design/construction teams on: Facility layout and line designUtilities (power distribution, compressed air, cooling, resin handling systems)Equipment footprint, flow, and scalabilityDefine manufacturing line architectures for: Combiner box assemblyCable and harness productionOvermolding operationsSupport installation, commissioning, and vertical ramp to high-volume production. Equipment Engineering Strategy & DeploymentDevelop standardized, scalable equipment platforms across all production lines.

Specify, source, and qualify manufacturing equipment including: Automated and semi-automated assembly systemsWire processing and crimping equipmentInjection molding and overmolding systemsLead equipment validation (FAT, SAT, IQ/OQ/PQ).Ensure design-for-manufacturing (DFM) alignment with product and R&D teams. Establish engineering documentation, standards, and change control systems. Maintenance System Build-OutBuild the maintenance organization from the ground up, including hiring, training, and structuring teams. Implement and deploy a CMMS for asset management, work orders, and spare parts control.

Establish: Preventive maintenance programsPredictive/condition-based maintenance systemsSpare parts strategy and inventory optimizationDrive early equipment reliability through commissioning and ramp phases.

Embed Total Productive Maintenance (TPM) culture across operations. Process & Equipment OwnershipOversee equipment performance across key processes: Combiner BoxesAutomated fastening, busbar assembly, enclosure handlingElectrical test systems (hipot, continuity, insulation resistance)Cable & HarnessesCutting, stripping, crimping, sealing, routingCrimp force monitoring and pull testingOvermolded HarnessesInjection molding presses, tooling, and auxiliary systemsMaterial drying, handling, and process controlEnsure process capability, repeatability, and robust error-proofing (poka-yoke).Standardize equipment and processes for multi-line replication.

Automation, Controls & Digital InfrastructureDefine and implement plant-wide automation architecture: PLCs, HMIs, SCADARobotics and automated assembly cellsVision inspection systemsDeploy Industry 4.0 systems: Real-time equipment monitoringData collection and analyticsMES integration and full product traceabilityEnsure cybersecurity and system reliability from day one. Capital Projects & Vendor ManagementOwn multi-million-dollar CapEx planning and execution for equipment and tooling.

Select and manage OEMs, integrators, and tooling suppliers.

Drive project execution from concept through commissioning and ramp.

Ensure all projects meet timeline, budget, and performance targets. Reliability & Operational ExcellenceEstablish and track key performance metrics: OEE, uptime, MTBF, MTTRLead structured root cause analysis (RCA) and CAPA processes.

Drive continuous improvement in: ThroughputChangeover time (SMED)Scrap reduction (especially crimping and overmolding defects)Build a data-driven reliability engineering function. Quality, Safety & ComplianceEnsure compliance with: OSHA, NFPA safety standardsUL and NEC

requirements

for eBOS productsISO 9001 / ISO 14001 systemsImplement safe equipment design and maintenance practices (LOTO, arc flash).Support audits, validation (IQ/OQ/PQ), and quality systems from startup phase.

Champion a zero-incident safety culture. New Product Introduction (NPI)Build scalable equipment solutions for new combiner box and harness designs.

Partner with R&D to ensure seamless transition from prototype to production.

Enable rapid product launches without disrupting ramp.

QualificationsEducationBachelor's degree in Mechanical Engineering, Electrical Engineering, Manufacturing Engineering, or related field (Master's preferred).Experience12–15+ years in manufacturing engineering, equipment engineering, or maintenance.7–10+ years leading engineering and maintenance teams. Direct experience with greenfield or brownfield plant startups strongly preferred.

Strong background in: Wire harness / cable assembly manufacturingInjection molding / overmoldingHigh-volume automated manufacturing environmentsTechnical ExpertiseEquipment design and industrial automation systemsWire processing, crimping, and termination technologiesInjection molding machines, tooling, and polymersPLCs, robotics, vision systems, and SCADAReliability engineering, CMMS, TPMLean manufacturing and Six SigmaLeadership CompetenciesProven ability to build teams, systems, and processes from zero to scaleStrong project and program management capabilityHands-on, execution-oriented leadership styleExcellent cross-functional communication and stakeholder alignmentData-driven decision-making mindsetKey Performance Indicators (KPIs)Ramp-to-volume timeline achievementOEE and uptime during ramp and steady-state productionMTBF / MTTR improvementsCapEx delivery (on time, on budget, on performance)Scrap and yie

Show full description ↓

Job Title: Director of Equipment Engineering & Maintenance (Greenfield)Department: Operations / Manufacturing EngineeringReports To: VP of Operations / Site LeaderPosition SummaryThe Director of Equipment Engineering & Maintenance will lead the design, build, and ramp of all manufacturing equipment, automation systems, and maintenance operations for a greenfield, high-volume eBOS production facility.

This role is responsible for establishing a world-class, scalable manufacturing platform to produce combiner boxes, cable assemblies, and overmolded harnesses. The Director will define equipment standards, build maintenance systems from the ground up, and ensure rapid, reliable production ramp with best-in-class uptime, quality, and cost performance. This is a hands-on leadership role requiring deep technical expertise and the ability to operate effectively in a fast-paced startup environment within a large-scale industrial build.

More Manufacturing roles nearby