Process Engineer
GF (Georg Fischer) · Little Rock, AR
- Level
- Engineer
- Team
- Process
- Degree
- Preferred
- Experience asked
- 5+ years
- Industry
- Industrial
- Posted
- 28 days ago
The role in 30 seconds
An engineer-level process role at GF (Georg Fischer) (industrial) in Little Rock, AR. Provides hands-on technical support to injection molding production operations.
- They ask for
- 5+ years · degree preferred
- Tools it names
- Lean, OEE, Root cause, Injection molding, Tooling, SolidWorks
Read from the posting. The full description is below.
From the plant jobs report · week of October 19, 2026
Process Engineer roles in the US: typical posted base $93k–$134k.
Median of the low and high ends of 265 live postings that list pay, out of 745 process engineer openings in the US, read from manufacturers' own careers sites.
Arkansas plant jobs report →Pay by team and state →What moves pay →
How this role compares
Against 10 other live process postings in Arkansas.
- Experience asked
- Typical (5+ years)
Similar roles usually ask 5+ years.
Skills these teams ask for most
- ✓ Root cause 36%
- ✓ Tooling 36%
- ✓ AutoCAD 27%
- SPC 27%
✓ = this posting asks for it too. % = share of similar postings that mention it.
Stands out: this posting asks for OEE, Injection molding, CATIA / NX, which few similar roles mention. If you have it, lead with it.
At a glance
Pulled from the posting text. If it's not listed here, the posting didn't say.
How to get in at this plant
Five moves over a week or two. The first one takes ten minutes.
- 1
Pick 2–3 people on the Process team at GF (Georg Fischer)
Engineers who joined in the last year or two reply the most. Use the team search on this page to find them.
- 2
Send a short, curious note
One real question about their work. No favors yet. Each person gets a different note, written for this role.
- 3
Turn a reply into a short call
Questions worth asking about this team:
- What does a normal week look like on your team?
- Is the work mostly new product launches or sustaining existing lines?
- How much time do you spend on the floor versus at a desk?
- How did you land the job? What stood out in your interviews?
- 4
Apply with someone vouching for you
If the call went well, ask whether they’d pass your résumé to the hiring manager. Send your résumé link, apply that day, and let them know.
- 5
Bring proof to the interview
One page of before-and-after numbers from projects you led: scrap, OEE, cycle time, cost. Plant managers hire on results.
This plant: GF (Georg Fischer) in Little Rock
6 other open roles at this site.
- Production Manager · Production · Manager
- Manufacturing Engineer · Manufacturing
- Maintenance Electrician Technician, Lead · Reliability · Technician
- Extrusion Technician (3rd Shift) · Manufacturing · Technician
- Quality Control Technician · Quality · Technician
- Manufacturing Maintenance Technician · Reliability · Technician
Full description from GF (Georg Fischer)As posted on their careers site.ShowHide
Responsibilities
- ◆Provides hands-on technical support to injection molding production operations.
- ◆Troubleshoots injection molding process issues and identifies opportunities to improve safety, quality, productivity, and OEE.
- ◆Develops, documents, and maintains standardized injection molding processes and operating parameters.
- ◆Supports process optimization and continuous improvement activities, including scrap reduction, cycle-time improvement, downtime reduction, and cost reduction.
- ◆Supports mold qualifications, process trials, capability studies, and production start-ups.
- ◆Works with Tooling and Operations to troubleshoot mold-related issues and improve mold performance.
- ◆Supports the installation, qualification, and ramp-up of new injection molding machines and auxiliary equipment.
- ◆Supports the introduction of new molds, products, and processes into production.
- ◆Performs process trials and feasibility studies for new materials, molds, equipment, and manufacturing technologies.
- ◆Uses data and structured problem-solving techniques to identify root causes and implement corrective actions.
- ◆Supports development and implementation of process documentation, work instructions, and process standards.
- ◆Works closely with Quality to address process-related quality issues and improve process capability and stability.
- ◆Participates in continuous improvement and Lean Manufacturing initiatives.
- ◆Maintains accurate technical documentation, process parameters, trial results, and engineering reports.
- ◆Works collaboratively with cross-functional teams to ensure successful implementation of process improvements.
- ◆Maintains a safe work environment and follows all applicable safety regulations and company policies.
- ◆Other duties as assigned.
Required Skills/Abilities
- ✓3–5 years of hands-on experience with injection molding processes in a manufacturing environment.
- ✓Strong understanding of injection molding processes, machine operation, mold operation, and process parameters.
- ✓Experience troubleshooting injection molding processes and identifying root causes of quality and production issues.
- ✓Understanding of mold design, mold components, and basic tooling concepts.
- ✓Ability to interpret engineering drawings, specifications, and process documentation.
- ✓Ability to use measurement equipment, including calipers, micrometers, and other basic inspection equipment.
- ✓Knowledge of plastics processing, including an understanding of material behavior and processing requirements.
- ✓Experience with semi-crystalline and amorphous plastics is preferred.
- ✓Experience with PVC, CPVC, polyolefins, or other thermoplastic materials is a plus.
- ✓Strong problem-solving and analytical skills.
- ✓Experience with Root Cause Analysis and structured problem-solving methodologies.
- ✓Ability to work effectively with Operations, Quality, Maintenance, Tooling, and other cross-functional teams.
- ✓Strong verbal and written communication skills.
- ✓Proficient in Microsoft Office applications.
- ✓Ability to read and understand technical drawings and documentation.
- ✓CAD experience with AutoCAD, SolidWorks, NX, or similar software is preferred.
- ✓Experience with Moldflow or similar injection molding simulation software is a plus.
- ✓Self-motivated and able to manage multiple projects and priorities.
- ✓Willingness to work hands-on in a manufacturing environment.
- ✓Ability to travel domestically as needed to support business requirements. ( Education and Experience:
- ✓Bachelor’s degree in mechanical engineering, Plastics/Polymer Engineering, Manufacturing Engineering, Industrial Engineering, or a related technical field preferred.
- ✓Equivalent combination of education, technical training, and relevant manufacturing experience may be considered in lieu of a degree.
- ✓3–5 years of hands-on injection molding process engineering or related plastics manufacturing experience required.
- ✓Experience working with injection molding machines, molds, auxiliary equipment, and thermoplastic materials.
- ✓Experience with injection molding process development, optimization, troubleshooting, and qualification.
Please submit your application via the ‘Apply’ button.