Tool and Die maker

GF (Georg Fischer) · Shawnee, OK

Level: Technician
Team: Manufacturing
Industry: Industrial
Posted: 30+ days ago

The role in 30 seconds

A technician-level manufacturing role at GF (Georg Fischer) (industrial) in Shawnee, OK. Assemble, disassemble, and test products to ensure functionality and quality.

Tools it names: ISO 9001, CNC, Machining, Welding, Tooling, EHS / safety

Read from the posting. The full description is below.

From the plant jobs report · week of October 19, 2026

Manufacturing Technician roles in the US: typical posted base $60k–$91k.

Median of the low and high ends of 52 live postings that list pay, out of 947 manufacturing technician openings in the US, read from manufacturers' own careers sites.

Oklahoma plant jobs report →Pay by team and state →What moves pay →

How this role compares

Against 757 other live manufacturing postings in the US.

Base pay: Not listed in this posting
Experience asked: Not stated

Skills these teams ask for most

✓ Team leadership 49%
✓ Tooling 39%
✓ CNC 31%
✓ Machining 30%

✓ = this posting asks for it too. % = share of similar postings that mention it.

Stands out: this posting asks for ISO 9001, Welding, EHS / safety, which few similar roles mention. If you have it, lead with it.

At a glance

Lifts up to 50 lbs

Pulled from the posting text. If it's not listed here, the posting didn't say.

How to get in at this plant

Five moves over a week or two. The first one takes ten minutes.

1
Pick 2–3 people on the Manufacturing team at GF (Georg Fischer)
Engineers who joined in the last year or two reply the most. Use the team search on this page to find them.
2
Send a short, curious note
One real question about their work. No favors yet. Each person gets a different note, written for this role.
3
Turn a reply into a short call
Questions worth asking about this team:
- What does a normal week look like on your team?
- Is the work mostly new product launches or sustaining existing lines?
- How much time do you spend on the floor versus at a desk?
- How did you land the job? What stood out in your interviews?
4
Apply with someone vouching for you
If the call went well, ask whether they’d pass your résumé to the hiring manager. Send your résumé link, apply that day, and let them know.
5
Bring proof to the interview
One page of before-and-after numbers from projects you led: scrap, OEE, cycle time, cost. Plant managers hire on results.

This plant: GF (Georg Fischer) in Shawnee

5 other open roles at this site.

Tool & Die Maker · Manufacturing · Technician
Maintenance Supervisor · Reliability · Supervisor
Maintenance Technician level 1 · Reliability · Technician
Maintenance Mechanic · Reliability · Technician
Automation Technician · Controls · Technician

Full description from GF (Georg Fischer)As posted on their careers site.Show

Responsibilities

The

Requirements

✓Must be able to lift 50 lbs. in a safe manner.
✓Must be able to perform repetitive motion. Examples: walking, reaching, bending, twisting, stooping, pushing, pulling, and standing for extended periods of time.
✓Clarity of vision and the ability to focus on a fast and repetitious operation for extended period of time.
✓Exposure to machine noise levels (hearing protection required).
✓Exposure to heavy equipment or components needed to produce product (safety toed shoes required).
✓Exposure to electrical and mechanical moving parts.
✓Exposure to sparks, chips, and dust (eye protection required).

Please submit your application via the ‘Apply’ button.

Show full description ↓

Summary

This position is responsible for manufacture, repair, provide input on design of a variety of tools, dies, and specialized parts and devices used in machinery and production equipment. The work involves precise measurements and complex technical plans. Must be able to set up and operate the following equipment: surface grinder, tool and cutter grinder, various manual and CNC milling machines, lathes, saws and any other pieces of equipment that are required to perform the daily tasks. Must be self-motivated, flexible and able to work without supervision. Will work to help and support other Tool and Die Makers and Manufacturing Engineers as needed.

Primary

of this position include, but are not limited to

•Follow direction from the General Manager of the PBU or his designee.
•Read and interpret technical prints to gain a comprehensive understanding of the required parts.
•Help support and maintain all 6S standards in the immediate work area and others as needed.
•Use machine tools, welding equipment to manufacture and repair tools, dies, fixtures and other equipment that are used in the production areas.
•Adhere to all Environmental, Health & Safety rules when operating machinery.
•Work with close tolerances related to drilling, boring, reaming, milling and turning.
•Adhere to ISO 9001 Quality, ISO 14001 Environmental, and OSHAS 18801 certification requirements.
•Program and run CNC mill and CNC lathe as required.
•Maintain a 40-hour workweek and ability to work overtime as needed.
•Set up and run manual mills and lathes as required.
•Perform other job-related duties as directed; follow instructions and guidelines.
•Measure finished parts to ensure they meet specifications using precise measurement tools such as micrometers, calipers, and gauges.
•Requires regular attendance per the schedule assigned by the supervisor.
•Assemble, disassemble, and test products to ensure functionality and quality.
•Perform regular maintenance of machine tools to ensure optimal performance.
•Inspect finished products for defects and ensure compliance with quality standards.
•Work closely with engineers and other production staff to ensure that the tools and dies they produce meet the needs of the manufacturing process.

This position should possess the following skills/knowledge

•Technical / Vocational certification in Tool and Die, Manufacturing Technology, machining or related field is desired.
•Proficiency with computer-aided manufacturing (CAM) software is desired.
•Four (4) years experience working as a Tool and Die Maker.
•Good working knowledge of standard shop mathematics.
•Good working knowledge of metal cutting feeds and speeds, threading terminology, and calculating angles for setting sine bars.
•Understanding of grinding principles and procedures.
•Able to read and interpret technical prints, sketches, design models, and/or verbal descriptions for planning operational sequences.
•Strong manual dexterity and ability to use hand tools.
•Knowledge of metal and other materials properties.
•Experience with precision measurement tools.
•Experience with Electrical Discharge Machining is desired.

Environmental / Atmospheric Conditions

•Typical office/factory environment with possibility of exposure to heat in production areas.

Working Conditions / Physical