ShopFloorJobs
Eaton logo

Lead Industrialization Engineer

Eaton · Charlotte, NC

Level
Level: Manager
Team
Team: Industrial
Base pay
Base pay: $97k–$143k
Degree
Degree: Required
Industry
Industry: Industrial
Posted
Posted: Yesterday
Apply on Eaton ↗

The role in 30 seconds

A management industrial role at Eaton (industrial) in Charlotte, NC. No relocation is provided for this position, only candidates that currently reside within 50 miles of the provided locations will be considered.

They ask for
degree required
Tools it names
Six Sigma, Root cause, FMEA, Validation (IQ/OQ/PQ), Automation, Tooling
Base pay
$97k–$143k

Read from the posting. The full description is below.

From the plant jobs report · week of November 16, 2026

Industrial Engineer roles in North Carolina: typical posted base $85k–$95k. This one lists $97k–$143k.

Median of the low and high ends of 3 live postings that list pay, out of 12 industrial engineer openings in North Carolina, read from manufacturers' own careers sites.

North Carolina plant jobs report →Pay by team and state →What moves pay →

How this role compares

Against 11 other live industrial postings in North Carolina.

Experience asked
Not stated

Similar roles usually ask 5+ years.

Skills these teams ask for most

  • ✓ AutoCAD 42%
  • Time studies 42%
  • Lean 33%
  • ✓ Six Sigma 25%
  • ✓ Root cause 25%
  • ✓ FMEA 25%

✓ = this posting asks for it too. % = share of similar postings that mention it.

At a glance

Pulled from the posting text. If it's not listed here, the posting didn't say.

How to get in at this plant

Five moves over a week or two. The first one takes ten minutes.

  1. 1

    Pick 2–3 people on the Industrial team at Eaton

    Engineers who joined in the last year or two reply the most. Use the team search on this page to find them.

  2. 2

    Send a short, curious note

    One real question about their work. No favors yet. Each person gets a different note, written for this role.

  3. 3

    Turn a reply into a short call

    Questions worth asking about this team:

    • What does a normal week look like on your team?
    • Is it more layout and capacity work, or time studies and standard work?
    • How did you land the job? What stood out in your interviews?
  4. 4

    Apply with someone vouching for you

    If the call went well, ask whether they’d pass your résumé to the hiring manager. Send your résumé link, apply that day, and let them know.

  5. 5

    Bring proof to the interview

    One page of before-and-after numbers from projects you led: scrap, OEE, cycle time, cost. Plant managers hire on results.

This plant: Eaton in Charlotte

8 other open roles at this site.

All 9 roles at Eaton →
Full description from EatonAs posted on their careers site.Show

Essential functions

A. Lead VA/VE and DFM initiatives for steel, copper, glastic, and other fabricated components manufactured by the Fabrication CoE

B. Serve as the primary engineering interface between the Fabrication CoE and product line MOL organizations, coordinating technical issues, design enhancements, engineering changes, and manufacturability improvements.

C. Identify opportunities to redesign fabricated components to reduce fabrication complexity, setup time, labor content, part proliferation, and manufacturing variation.

D. Develop common fabrication design standards and guidelines that can be applied across ETO product lines while working with the MOL engineering teams to preserve product-specific performance and design requirements.

E. Translate Fabrication CoE capabilities and constraints into actionable product design requirements, including preferred materials, tolerances, geometries, processes, tooling approaches, and manufacturing methods.

F. Coordinate technical validation and production readiness of proposed changes through appropriate risk assessment, DFMEA, prototype/pilot builds, testing, certification review, and engineering change processes.

G. Lead resolution of systemic fabrication-related design issues, distinguishing between local manufacturing/process issues and issues requiring product design changes.

H. Drive standardization and reuse across product lines, identifying opportunities to eliminate unnecessary part variation and increase common components, features, materials, and fabrication approaches.

I. Establish appropriate engineering metrics for fabrication industrialization, including VA/VE pipeline, implemented savings, material utilization, fabrication work content, quality, manufacturability, and design standardization.

J. Provide technical leadership for the long-term evolution of Fabrication CoE capabilities, ensuring future equipment, automation, tooling, and processes are considered as part of product industrialization strategy.

Qualifications

Basic

Qualifications

  • ✓Bachelor's degree in Mechanical Engineering, Manufacturing Engineering, Industrial Engineering, or a related engineering discipline.
  • ✓Five (5) or more years of relevant product design, manufacturing/fabrication engineering, industrialization, manufacturing engineering, or Maintenance of Line (MOL) experience with complex electromechanical products.
  • ✓No relocation is provided for this position, only candidates that currently reside within 50 miles of the provided locations will be considered. Active Duty Military Service member candidates are exempt from the geographical area limitation.
  • ✓Eaton will not consider applicants for employment immigration sponsorship or support for this position. This means that Eaton will not support any CPT, OPT, or STEM OPT plans, F-1 to H-1B, H-1B cap registration, O-1, E-3, TN status, I-485 job portability, etc.

Preferred Qualifications

  • ✓Masters degree in engineering, engineering management, or business
  • ✓Six Sigma Greenbelt or higher certification

requirements

All positions may require partici

Show full description ↓

Eaton’s ES AMER ARS division is currently seeking a Lead Industrialization Engineer. ​

Please note the salary information shown above is a general guideline only. Salaries are based upon candidate skills, experience, and qualifications, as well as market and business considerations.

Primary function

The Lead Industrialization Engineer – Fabrication CoE provides technical leadership for the industrialization, VA/VE, and design for manufacturing strategy for fabricated components supporting ETO product lines. The position serves as the primary engineering interface between the Fabrication CoE and product line Maintenance of Line (MOL) engineering teams, translating fabrication capabilities, constraints, quality opportunities, and cost opportunities into standardized and manufacturable design solutions.

The role leads cross-product line initiatives involving steel, copper, glastic and other fabricated materials to improve manufacturability, increase commonality, reduce material and labor content, improve quality and throughput, and enable effective utilization of Fabrication CoE capabilities. The position leads opportunities from identification through technical evaluation and coordinates with the appropriate product line MOL engineering organization for product-specific design approval, engineering change, validation, and implementation.

Position Criteria

  • •Working knowledge of product design, bills of material, engineering change control, configuration management, and product lifecycle management.
  • •Working knowledge of fabrication processes associated with sheet steel, copper conductors/bus, insulating materials such as glastic, as well as connectors (i.e. hardware) used to support electromechanical assemblies.
  • •Ability to translate manufacturing constraints and capabilities into product design recommendations, engineering requirements, and standardized design practices.
  • •Experience applying design for manufacturability and assembly, value engineering, cost analysis, root-cause problem solving, DFM, and production validation.
  • •Proficiency with relevant engineering tools such as AutoCAD, Autodesk Inventor or equivalent 3D CAD, Enovia or equivalent PLM, and enterprise BOM/ERP systems.
  • •Strong analytical, project leadership, communication, facilitation, and influencing skills across engineering and plant organizations. verbal and written communication skills, persuasive skills, and analytical problem-solving skills.
  • •Demonstrated experience leading cross-functional technical projects involving product design changes, design for manufacturability (DFM), cost reduction, manufacturing improvement, or product industrialization.
  • •Demonstrated experience interpreting engineering drawings, specifications, bills of material, and manufacturing

More Industrial roles nearby