Lead Production Technician - Third Shift
Commonwealth Fusion Systems · Devens, MA
- Level
- Technician
- Team
- Production
- Experience asked
- 2+ years
- Industry
- Industrial
- Posted
- 30+ days ago
The role in 30 seconds
A technician-level production role at Commonwealth Fusion Systems (industrial) in Devens, MA. Hire, lead, and support training of a team of technicians and welders to build electromechanical parts and assemblies with a focus on quality, cost, and delivery.
- They ask for
- 2+ years
- Tools it names
- Lean, Six Sigma, 5S, Injection molding, Welding
- Day to day
- some off-shift / weekend coverage
Read from the posting. The full description is below.
From the plant jobs report · week of October 19, 2026
Manufacturing Technician roles in the US: typical posted base $60k–$91k.
Median of the low and high ends of 50 live postings that list pay, out of 825 manufacturing technician openings in the US, read from manufacturers' own careers sites.
Massachusetts plant jobs report →Pay by team and state →What moves pay →
How this role compares
Against 18 other live production postings in Massachusetts.
- Experience asked
- Less than usual (2+ vs 5+)
Similar roles usually ask 5+ years.
Skills these teams ask for most
- ✓ Team leadership 63%
- ✓ Lean 42%
- ✓ 5S 32%
- ✓ Injection molding 26%
- ✓ Six Sigma 21%
✓ = this posting asks for it too. % = share of similar postings that mention it.
At a glance
Pulled from the posting text. If it's not listed here, the posting didn't say.
How to get in at this plant
Five moves over a week or two. The first one takes ten minutes.
- 1
Pick 2–3 people on the Production team at Commonwealth Fusion Systems
We found 4 people at this company and state: 4 in this kind of role. Engineers who joined in the last year or two reply the most. See them ↓
- 2
Send a short, curious note
One real question about their work. No favors yet. Each person gets a different note, written for this role.
Write to Marcus → (free) - 3
Turn a reply into a short call
Questions worth asking about this team:
- What does a normal week look like on your team?
- How does off-shift and weekend coverage work?
- How did you land the job? What stood out in your interviews?
- 4
Apply with someone vouching for you
If the call went well, ask whether they’d pass your résumé to the hiring manager. Send your résumé link, apply that day, and let them know.
- 5
Bring proof to the interview
One page of before-and-after numbers from projects you led: scrap, OEE, cycle time, cost. Plant managers hire on results.
This plant: Commonwealth Fusion Systems in Devens
15 other open roles at this site · 4 people we found in production roles at Commonwealth Fusion Systems.
- Senior Controls Engineer · Controls · Senior
- Controls Engineer · Controls
- Production Technician Supervisor - Second Shift · Production · Supervisor
- Senior Manufacturing Engineer - Assembly · Manufacturing · Senior
- Senior Manufacturing Engineer - First Shift · Manufacturing · Senior
- Manager, Process Engineering - Assembly · Process · Manager
Full description from Commonwealth Fusion SystemsAs posted on their careers site.ShowHide
requirements
are met per documentation. The technician team is a hands-on build team working with mechanical, electrical, magnetic, cryogenic, pressure, vacuum, and pneumatic systems.
Weekday third shift (Monday–Friday, 10 p.m. – 6:30 a.m.)
Hourly pay + 15% Differential
What you'll do
- ◆Hire, lead, and support training of a team of technicians and welders to build electromechanical parts and assemblies with a focus on quality, cost, and delivery
- ◆Work within a multi-disciplinary team of manufacturing engineers and technicians to develop and qualify new manufacturing techniques and processes
- ◆Perform production hardware builds according to procedures, specifications, and test instructions based on scheduling
- ◆Troubleshoot and resolve manufacturing discrepancies with a focus on continuous improvement
- ◆Use various mechanical and precision calibrated tools such as torque wrenches, micrometers, calipers and a variety of hand and power tools
- ◆Ensure all technicians are adhering to safety and work area cleanliness standards
- ◆Be an active stakeholder for feedback to supervisor during biannual performance reviews
- ◆Perform other related job duties related to the job, as assigned by management
Requirements
- ✓Ability to occasionally lift up to 50 lbs
- ✓Perform activities such as stooping, typing, standing, or sitting for extended periods of time
- ✓Dedication to safety to mitigate industrial hazards that may include heat, cold, noise, fumes, strong magnets, lead (Pb), high voltage, and cryogenics
- ✓Willingness to travel or work required nights/weekends/on-call occasionally
Show full description ↓Show less ↑
About Commonwealth Fusion Systems
Commonwealth Fusion Systems is on a mission to deliver the urgent transition to fusion energy.
Combining decades of research, top talent, and new technologies, we’re designing and building commercially viable fusion power plants. And we're working with policymakers, suppliers, and many others to build the energy industry of the future.
We’re in the best position to make it happen. Since 2018, we’ve raised $4 billion of capital, making us the largest and leading fusion company in the world.
Now we’re looking for more thinkers, doers, builders, and makers to join us. People who’ll bring new perspectives, solve tough problems, and thrive as part of a team.
If that’s you and this role fits, we want to hear from you.
Join the power movement as a Lead Production Technician
The Lead Production Technician at Commonwealth Fusion Systems is responsible for leading a fast-paced and agile team building the world’s strongest high temperature superconducting magnets and assemblies for integration into CFS fusion devices. The role is responsible for continuously improving production tasks, maintaining schedules with resourcing, and assuring quality
What we’re looking for
- •High school diploma/equivalency certificate or higher
- •Minimum of 2 years’ experience in a formal leadership role in a manufacturing setting
- •Minimum of 6 years’ experience in a variety of technical skills such as, but not limited, to mechanical and electrical assembly, plumbing, vacuum systems, epoxy potting, injection molding, cryogenic systems, soldering, and wiring
- •Commitment to safety and quality with the ability to communicate this to your team
- •Strong level of accountability for yourself and your team
- •Ability to lead a team and give clear and precise direction
- •Ability to take directions from supervisors and work independently
- •Desire to work and contribute in a fast-paced, environment with daily changes
- •Excellent communication (written and verbal) to your team, including daily and weekly goals
- •Meticulous attention to detail and cleanliness with hands-on work
- •Ability and patience to work through projects from start to finish, including assembly and testing
Bonus points for
- +Experience with Lean manufacturing, 5S, and Six Sigma principles
- +Experience with winding equipment of any type is a plus
Must-have