
Sr. Manufacturing Engineer - Federal Ammunition
The Kinetic Group · Anoka, MN
- Level
- Level: Senior
- Team
- Team: Manufacturing
- Base pay
- Base pay: $89k–$124k
- Degree
- Degree: Required (or equivalent experience)
- Experience asked
- Experience asked: 4+ years
- Industry
- Industry: Industrial
- Posted
- Posted: 6 days ago
The role in 30 seconds
A senior manufacturing role at The Kinetic Group (industrial) in Anoka, MN. Reaching, handling, and fingering (manual dexterity) for work on computer, function board, measuring dies, products or tooling.
- They ask for
- 4+ years · degree required (or equivalent experience)
- Tools it names
- Lean, Six Sigma, Automation, CNC, Machining, Welding
- Base pay
- $89k–$124k
Read from the posting. The full description is below.
From the plant jobs report · week of November 16, 2026
Manufacturing Engineer roles in Minnesota: typical posted base $93k–$136k. This one lists $89k–$124k.
Median of the low and high ends of 48 live postings that list pay, out of 82 manufacturing engineer openings in Minnesota, read from manufacturers' own careers sites.
Minnesota plant jobs report →Pay by team and state →What moves pay →
How this role compares
Against 81 other live manufacturing postings in Minnesota.
- Base pay
- In line with similar roles
- Experience asked
- Less than usual (4+ vs 5+)
Typical $92k–$128k, from 43 postings that list pay.
Similar roles usually ask 5+ years.
Skills these teams ask for most
- ✓ Lean 52%
- ✓ Tooling 45%
- Root cause 40%
- New product launch 32%
- ✓ Team leadership 30%
- ✓ Automation 23%
✓ = this posting asks for it too. % = share of similar postings that mention it.
Stands out: this posting asks for Welding, which few similar roles mention. If you have it, lead with it.
At a glance
Pulled from the posting text. If it's not listed here, the posting didn't say.
How to get in at this plant
Five moves over a week or two. The first one takes ten minutes.
- 1
Pick 2–3 people on the Manufacturing team at The Kinetic Group
We found 1 person at this company and state: 1 leaders. Engineers who joined in the last year or two reply the most. See them ↓
- 2
Send a short, curious note
One real question about their work. No favors yet. Each person gets a different note, written for this role.
Write to Jacob → (free) - 3
Turn a reply into a short call
Questions worth asking about this team:
- What does a normal week look like on your team?
- Is the work mostly new product launches or sustaining existing lines?
- How much time do you spend on the floor versus at a desk?
- How did you land the job? What stood out in your interviews?
- 4
Apply with someone vouching for you
If the call went well, ask whether they’d pass your résumé to the hiring manager. Send your résumé link, apply that day, and let them know.
- 5
Bring proof to the interview
One page of before-and-after numbers from projects you led: scrap, OEE, cycle time, cost. Plant managers hire on results.
This plant: The Kinetic Group in Anoka
2 other open roles at this site · 1 person we found in manufacturing roles at The Kinetic Group.
- Quality Engineer - Federal Ammunition · Quality
- Process Engineer - Federal Ammunition · Process
Full description from The Kinetic GroupAs posted on their careers site.ShowHide
Experience you bring
- ✓Bachelor's degree in engineering or equivalent related experience.
- ✓CAD training, SolidWorks preferred.
- ✓Computer skills in word processing and spreadsheets.
- ✓Knowledgeable in machining processes such as manual and CNC machining, turning, grinding, heat treatment, sheet metal fabrication, welding, tool & die as well as fundamentals of machine design.
- ✓Designing for manufacturability.
- ✓Knowledgeable in machine drive components and elements commonly used in manufacturing.
- ✓Knowledgeable in automation components both electromechanical and mechanical systems.
- ✓Experience and knowledge of material selection used in machine parts, tooling and dies.
- ✓Knowledgeable in inspection and measurement tools to inspect machine parts and tooling during troubleshooting – calipers, micrometers, bore, depth, thread and feeler gages, machine levels, dial indicators, gage pins and blocks.
- ✓Excellent mathematical, problem solving, written and verbal communications skills
- ✓Thorough understanding and broad application of technical standards, principles, theories, and techniques.
- ✓Ability to perform at a high level with minimal supervision and direction.
- ✓Ability to work cooperatively and effectively with other manufacturing plant personnel.
Requirements
Most time is spent sitting with occasional standing and walking in the immediate work area or in manufacturing. Frequent lifting, carrying, pushing, or pulling weights of up to 10 pounds. Periodic climbing, stooping, kneeling, crouching, crawling when observing production processes. Reaching, handling, and fingering (manual dexterity) for work on computer, function board, measuring dies, products or tooling. Vision for observing production processes, inspecting primer mix, etc. Hearing for diagnosing problems in machinery due to the sounds made.
Mental
Requirements
Reading for technical materials and blueprints and math skills for calculations and conversions. Attention to detail for design work. Reasoning and problem solving and attentiveness to tasks and deadlines. Flexibility to handle many projects simultaneously and attentiveness to time deadlines. Individual initiative to complete projects in a timely fashion. Verbal and written communication skills to communicate with vendors and internal associates (customers). Work direction given to associates working on the assigned projects.
Equipment Used : Telephone, copy/print/fax machine, computer and keyboard, manufacturing machines, tooling, inspection tooling and equipment, calculator and drafting tools.
Working Environment : Work is done during normal work hours, but overtime may be necessary depending on the workload. Frequent time spent in production areas subject to exposure to noise, mechanical, pressurized, electrical, and explosive equipment/material, and moving objects. Depending on the area, may be exposed to fumes/odors or dirt/dust. Most work is done individually, though some time is spent working with others and all work is done around other associates. Occasional contact with outside vendors. General supervision received.
Show full description ↓Show less ↑
Pay Range
$88,600.00 - $124,200.00 The actual annual salary offered to a candidate will be based on variables including experience, geographic location, education, and skills/achievements, and will be mutually agreed upon at the time of offer.
Job Description
The Kinetic Group is a world leader in the design, manufacturing, and distribution of small caliber ammunition under the iconic brands B&P, CCI, Federal Premium, Fiocchi, HEVI-Shot, Remington and Speer. We have domestic ammunition manufacturing facilities in Minnesota, Idaho, Arkansas, and Missouri, and service law enforcement, government agencies and sporting enthusiasts throughout the world. Today, The Kinetic Group is a part of the Ammo+ division of The Czechoslovak Group (CSG), which holds a diverse portfolio of companies in the defense, security, automotive, aerospace and rail industries.
The Sr. Manufacturing Engineer has a crucial role in developing new methods, tooling and machine designs and resolving processing issues/problems involved in the manufacturing of rimfire ammunition and components, primers and primer components as well as shot and bullet production.
This position reports to the Manufacturing Engineering Director and is based out of our Anoka office.
What you’ll do
- •Develop improvements to tooling and processes for the manufacture of existing products by changing the present specifications and supervising special tests concerning product and or process improvement.
- •Investigates and troubleshoots production difficulties and takes corrective measures.
- •Identifies and implements cost reduction opportunities such as improved material utilization, increased machine/process efficiency, reduced cost of poor quality, etc.
- •Reviews tools and perishable machine parts drawings for the necessity of revision on tolerances, surface finishes, dimensions, material selection, etc., and initiates Engineering Change Orders where justified.
- •Assist with design, building and installation of machine and equipment guarding in accordance with OSHA standards. Present guarding to safety committee for approval.
- •Perform major equipment failure project management assignments including responsibility for: capital expenditure justification, equipment/process redesign and documentation, project spending, project execution timing, and resource management.
- •Reviews bills of materials and routes for accuracy and cost savings opportunities.
You might have
- •4+ years' experience in a manufacturing environment.
- •Hands on experience with Six Sigma tools and techniques and lean manufacturing concepts.
- •Thorough understanding of machine shop technology.
- •Well-rounded knowledge base on materials, technologies, manufacturing techniques.
Physical
Work Environment
Employee work assignments may include tasks working with and/or exposure to potentially hazardous a
