Metrology Technician
Scout Motors · Blythewood, SC
- Level
- Technician
- Team
- Quality
- Degree
- Required
- Experience asked
- 3+ years
- Industry
- Automotive
- Posted
- 30+ days ago
The role in 30 seconds
A technician-level quality role at Scout Motors (automotive) in Blythewood, SC. You will be responsible for performing dimensional inspections, equipment calibration, and measurement system verification to support manufacturing and quality operations.
- They ask for
- 3+ years · degree required
- Tools it names
- SPC, MSA / Gage R&R, GD&T, Validation (IQ/OQ/PQ), Tooling
Read from the posting. The full description is below.
From the plant jobs report · week of October 19, 2026
Quality Technician roles in the US: typical posted base $50k–$70k.
Median of the low and high ends of 23 live postings that list pay, out of 401 quality technician openings in the US, read from manufacturers' own careers sites.
South Carolina plant jobs report →Pay by team and state →What moves pay →
How this role compares
Against 10 other live quality postings in South Carolina.
- Experience asked
- Less than usual (3+ vs 5+)
Similar roles usually ask 5+ years.
Skills these teams ask for most
- Team leadership 45%
- Root cause 36%
- ✓ SPC 36%
- ✓ GD&T 36%
- ✓ Tooling 36%
✓ = this posting asks for it too. % = share of similar postings that mention it.
Stands out: this posting asks for MSA / Gage R&R, which few similar roles mention. If you have it, lead with it.
At a glance
Pulled from the posting text. If it's not listed here, the posting didn't say.
How to get in at this plant
Five moves over a week or two. The first one takes ten minutes.
- 1
Pick 2–3 people on the Quality team at Scout Motors
We found 5 people at this company and state: 2 in this kind of role, 2 leaders, 1 recruiters. Engineers who joined in the last year or two reply the most. See them ↓
- 2
Send a short, curious note
One real question about their work. No favors yet. Each person gets a different note, written for this role.
Write to Jeremy → (free) - 3
Turn a reply into a short call
Questions worth asking about this team:
- What does a normal week look like on your team?
- Which standards drive the work here: ISO 13485, IATF 16949, AS9100?
- How much of the job is customer complaints versus prevention?
- How did you land the job? What stood out in your interviews?
- 4
Apply with someone vouching for you
If the call went well, ask whether they’d pass your résumé to the hiring manager. Send your résumé link, apply that day, and let them know.
- 5
Bring proof to the interview
One page of before-and-after numbers from projects you led: scrap, OEE, cycle time, cost. Plant managers hire on results.
This plant: Scout Motors in Blythewood
8 other open roles at this site · 5 people we found in quality roles at Scout Motors.
- Supplier Quality Engineer, BIW / Class A · Quality
- Specialist, Manufacturing Engineer - Assembly Interior · Manufacturing
- Specialist, Industrial Engineering & Production System · Industrial
- Supplier Quality Engineer · Quality
- Assembly Technician (Energy Systems) – Technical Center Workshop · Manufacturing · Technician
- Sr. Metrology Technician · Quality · Technician
Full description from Scout MotorsAs posted on their careers site.ShowHide
requirements
— an all-electric powertrain as well as the Harvester™ range extender powertrain which includes a built-in gas-powered generator with an estimated 500 miles of combined range.
At Scout Motors, we empower our talented, inclusive, and entrepreneurial teams to innovate. What makes a Scout employee? Someone who is a visionary and a leader, who seeks new paths and shares lessons learned. A knowledgeable doer who collaborates across the company to build better. A go-getter with unrivaled passion.
Join us at Scout Motors and be part of shaping the future of transportation. If you're ready to drive change and make history, apply now!
What you’ll do
We expect all Scouts to demonstrate integrity, curiosity, resourcefulness, a growth mindset, and a positive attitude. As a Metrology Technician , you will be responsible for performing dimensional inspections, equipment calibration, and measurement system verification to support manufacturing and quality operations. You will work closely with engineers and production teams to ensure parts and assemblies meet design intent and GD&T
requirements
. This role requires attention to detail, hands-on experience with measurement tools, and the ability to interpret technical drawings and data .
- ✓Perform routine dimensional inspections of parts, assemblies, and fixtures using established measurement methods and standard metrology equipment.
- ✓Execute existing measurement programs and inspection plans to collect accurate dimensional data.
- ✓Record and report measurement results, identifying deviations and escalating concerns to senior team members when required.
- ✓Read and interpret engineering drawings, specifications, and basic GD&T requirements.
- ✓Support calibration, verification, and routine maintenance activities for measurement equipment.
- ✓Assist in troubleshooting dimensional issues by providing inspection data and observations.
- ✓Follow standardized metrology procedures, work instructions, and quality
requirements
to ensure consistency and repeatability.
- ✓Support capability studies, Gage R&R activities, and measurement system validations under guidance from senior team members.
- ✓Collaborate with Engineering, Quality, and Manufacturing teams to address routine dimensional concerns.
- ✓Support production operations and new product launches through inspection and measurement activities.
- ✓Maintain proper care, storage, and handling of precision measurement equipment.
- ✓Contribute to continuous improvement initiatives focused on quality and measurement processes.
Preferred Qualifications
- ✓Experience in automotive, electric vehicle , or high-volume manufacturing environments.
- ✓Exposure to metrology software such as PolyWorks , ZEISS INSPECT, or similar applications.
- ✓Familiarity with basic statistical process control (SPC), Gage R&R , and quality tools.
- ✓Technical certification, associate degree, or vocational training in manufacturing, quality, metrology, or a related field.
What you'll gain
The benefits of joining Scout include the chance to build products and a company from the ground up . This is a chance to create something new and lasting – with an iconic brand at its foundation . In addition, Scout provides competitive compensation and benefits to support your physical, mental, and financial wellbeing. Program specifics are detailed in company policies and employee benefit guides, select highlights:
- ✓Competitive insurance including:
- ✓Medical, dental, vision and income protection plans
- ✓401(k) program with:
- ✓An employer match and immediate vest
Show full description ↓Show less ↑
Here at Scout Motors, we're carrying forward the heritage of one of the most iconic American vehicles in history. A vehicle dating back to 1960. One that forged the path for future generations of rugged SUVs and trucks and will do so once again.
But Scout is more than just a brand, it’s a legacy steeped in a culture of exploration, caretaking, and hard work.
The Scout brand is all about respect. Respect for the past and the future by taking an iconic American brand that hasn’t been around for a while, electrifying it, digitizing it, and loading it with American innovation. Respect for communities by creating a company that stands for its people and its customers. Respect for both work and play, with vehicles that are equally at home at a camp site, a job site, or on a Tuesday commute. And respect for our customers by developing two powertrains that meet their
Location & Travel Expectations
- •Location: Blythewood, South Carolina
- •Attendence: Daily
- •Applicants should expect that the role will require the ability to convene with Scout colleagues in person and travel to participate in events on behalf of the company from time to time.
What you’ll bring
We expect all Scouts to have integrity, curiosity, resourcefulness, and strive to exhibit a positive attitude, as well as a growth mindset. You’ll be comfortable with change and flexible in a fast-paced, high-growth environment. You’ll take a collaborative approach to achieve ambitious goals. Here’s what else you’ll bring:
- •3+ years of experience in metrology , inspection, manufacturing, or related technical environment.
- •Basic hands-on experience with dimensional measurement equipment such as, portable measuring arms, calipers, micrometers, height gauges, scanners, or laser measurement systems.
- •High School Diploma or GED.
- •Good understanding of Geometric Dimensioning and Tolerancing ( GD&T ).
- •Ability to read and interpret engineering drawings and specifications.
- •Experience collecting, documenting, and reporting measurement data accurately.
- •Familiarity with calibration practices and proper handling of measurement equipment.
- •Proficiency with Microsoft Office applications, including Excel and Word.
- •Strong attention to detail, organization, and problem-solving skills.
- •Ability to work effectively in a team environment and communicate with cross-functional partners