Industrial Engineer
Overhead Door · Mount Hope, OH
- Level
- Level: Engineer
- Team
- Team: Industrial
- Degree
- Degree: Required
- Industry
- Industry: Industrial
- Posted
- Posted: 3 days ago
The role in 30 seconds
An engineer-level industrial role at Overhead Door (industrial) in Mount Hope, OH. Design, improve and sustain safe, reliable manufacturing systems that integrate people, equipment, materials and information.
- They ask for
- degree required
- Tools it names
- Lean, Six Sigma, Kaizen, 5S, Value stream mapping, OEE
Read from the posting. The full description is below.
From the plant jobs report · week of November 16, 2026
Industrial Engineer roles in Ohio: typical posted base $82k–$125k.
Median of the low and high ends of 4 live postings that list pay, out of 21 industrial engineer openings in Ohio, read from manufacturers' own careers sites.
Ohio plant jobs report →Pay by team and state →What moves pay →
How this role compares
Against 20 other live industrial postings in Ohio.
- Experience asked
- Not stated
Similar roles usually ask 5+ years.
Skills these teams ask for most
- ✓ Lean 67%
- ✓ Time studies 52%
- ✓ Automation 43%
- ✓ Team leadership 43%
- ✓ Six Sigma 38%
- ✓ Value stream mapping 38%
✓ = this posting asks for it too. % = share of similar postings that mention it.
Stands out: this posting asks for Kaizen, 5S, Power BI / Tableau, EHS / safety, which few similar roles mention. If you have it, lead with it.
At a glance
Pulled from the posting text. If it's not listed here, the posting didn't say.
How to get in at this plant
Five moves over a week or two. The first one takes ten minutes.
- 1
Pick 2–3 people on the Industrial team at Overhead Door
Engineers who joined in the last year or two reply the most. Use the team search on this page to find them.
- 2
Send a short, curious note
One real question about their work. No favors yet. Each person gets a different note, written for this role.
- 3
Turn a reply into a short call
Questions worth asking about this team:
- What does a normal week look like on your team?
- Is it more layout and capacity work, or time studies and standard work?
- How did you land the job? What stood out in your interviews?
- 4
Apply with someone vouching for you
If the call went well, ask whether they’d pass your résumé to the hiring manager. Send your résumé link, apply that day, and let them know.
- 5
Bring proof to the interview
One page of before-and-after numbers from projects you led: scrap, OEE, cycle time, cost. Plant managers hire on results.
This plant: Overhead Door in Mount Hope
1 other open role at this site.
- Manufacturing Plant Manager · Production · Manager
Industrial Engineer at Overhead Door in other locations
Overhead Door lists this title in 5 places. Pick the plant you can get to.
Full description from Overhead DoorAs posted on their careers site.ShowHide
Preferred Experience
- ✓Five or more years of industrial or manufacturing engineering experience in a high-mix production environment.
- ✓Experience in building products, metal fabrication, forming, finishing, assembly, packaging or comparable processes.
- ✓Hands-on improvement results using Lean or Six Sigma methods; relevant certification is helpful but does not replace demonstrated application.
- ✓Experience with CAD layout tools, Power BI, statistical analysis, discrete-event simulation or automation business cases.
- ✓Experience validating fi
Show full description ↓Show less ↑
Design, improve and sustain safe, reliable manufacturing systems that integrate people, equipment, materials and information. The Industrial Engineer translates ASD operating priorities into practical improvements in Safety, Quality, Delivery, Cost, Cash and People (SQDCCP), with emphasis on work measurement, labor standards, capacity, productivity and material flow. Work directly with operators, supervisors and value stream managers to solve operating problems at the gemba, establish repeatable processes and develop plant capability through the ASD Lean Operating System / D.O.O.R. Performance System. Deliver measurable improvements and verify that benefits are sustained in daily operations.
Safety, Ergonomics and Work Design
- •Apply the ASD Safety Golden Rules and partner with EHS to identify and reduce ergonomic, handling and process risks. Integrate safe work methods into workstation design and standard work.
- •Evaluate reach, posture, lifting, repetitive motion and material presentation; recommend practical engineering controls and verify effectiveness with affected employees.
- •Ensure proposed changes receive required safety, quality and technical reviews before implementation. Escalate unsafe conditions promptly.
Work Measurement and Labor Standards
- •Conduct time studies, work sampling and method analysis across shifts and representative product mixes. Separate manual time, machine time, setup, walking, waiting and avoidable losses.
- •Develop and maintain documented labor and setup standards using approved methods, representative observations and justified allowances. Validate methods with operators and supervisors and update standards after process changes.
- •Create standard work, work instructions and labor-balance charts with Operations and Quality. Establish sustainable staffing models that reflect demand, mix, training, breaks and operating constraints.
Capacity, Constraints and Production Flow
- •Develop demonstrated-capacity models using product mix, cycle times, changeovers, yield, downtime and available operating hours. Distinguish theoretical capacity from sustainable output.
- •Identify system constraints and improve throughput through line balancing, setup reduction, workload redistribution and targeted loss elimination. Avoid improving local utilization at the expense of total flow.
- •Support Materials and Planning with capacity, routing and run-rate inputs for demand planning, scheduling, build-ahead decisions and backlog recovery. Quantify gaps and alternatives before customer commitments are made.
Layout and Materials Flow
- •Design plant, cell and workstation layouts that improve safety, flow, space utilization and access for maintenance. Evaluate point-of-use storage, replenishment routes and packaging with Materials and Operations.
- •Map current and future material and information flows; reduce unnecessary travel, handling, queue time and work-in-process. Establish pull, replenishment and inventory parameters with Materials where appropriate.
- •Apply these methods to OHD door and component manufacturing, assembly, finishing, packaging and shipping processes as applicable to the assigned facility.
ASD Lean Operating System and Problem Solving
- •Support SQDCCP daily management, tiered escalation, leader standard work, visual controls and plant bowler priorities. Translate gaps into scoped projects with baselines, owners, milestones and sustainment plans.
- •Facilitate PDCA, root-cause analysis, kaizen, 5S, standard work, value stream mapping and changeover reduction. Select tools based on the problem and coach employees in their practical use.
- •Partner with Quality and Manufacturing Engineering on defect reduction, process capability, error prevention and equipment-loss analysis. Use OEE where relevant and distinguish availability, performance and quality losses.
Financial Benefits and Project Execution
- •Build business cases with Finance, including baseline, investment, implementation cost, annual benefit, in-year timing and payback. Separate realized savings, cost avoidance, capacity release and working-capital release; prevent double counting.
- •Lead assigned projects through implementation, training and operational handoff. Verify benefits with Finance and operating owners and confirm sustained performance after completion.
- •Transfer methods and documentation from consultants or contractors to OHD employees. Share proven improvements across ASD plants using common standards.
- •Bachelor’s degree in Industrial Engineering, Manufacturing Engineering, Mechanical Engineering or a related engineering discipline.
- •Demonstrated manufacturing experience through employment, internship or cooperative education, with practical exposure to work measurement, production analysis or process improvement. Project scope and independence will match the assigned job level.
- •Working knowledge of time studies, labor standards, line balancing, capacity analysis, layout design, ergonomics and Lean problem solving.
- •Ability to analyze operational data, validate assumptions and communicate recommendations clearly to operators, managers and functional partners.
- •Proficiency with Excel and the ability to read process layouts and engineering drawings; familiarity with ERP or manufacturing data systems.
- •Ability to lead projects without direct supervisory authority and work effectively across shifts and functions.
