ShopFloorJobs
MKS Instruments logo

Sr Quality Engineer

MKS Instruments · Klamath Falls, OR

Level
Level: Senior
Team
Team: Quality
Base pay
Base pay: $88k–$147k
Degree
Degree: Required
Experience asked
Experience asked: 5+ years
Industry
Industry: Industrial
Posted
Posted: 5 days ago

The role in 30 seconds

A senior quality role at MKS Instruments (industrial) in Klamath Falls, OR. Own a practical site quality dashboard covering customer complaints, defects, scrap, rework, first-pass yield, process capability, supplier performance, audit actions, and corrective-action closure.

They ask for
5+ years · degree required
Tools it names
Lean, Six Sigma, Root cause, SPC, Control plans, Minitab
Base pay
$88k–$147k

Read from the posting. The full description is below.

From the plant jobs report · week of November 16, 2026

Quality Engineer roles in Oregon: typical posted base $104k–$199k. This one lists $88k–$147k.

Median of the low and high ends of 8 live postings that list pay, out of 19 quality engineer openings in Oregon, read from manufacturers' own careers sites.

Oregon plant jobs report →Pay by team and state →What moves pay →

How this role compares

Against 18 other live quality postings in Oregon.

Base pay
About 22% below similar roles

Typical $104k–$199k, from 7 postings that list pay.

Experience asked
Less than usual (5+ vs 8+)

Similar roles usually ask 8+ years.

Skills these teams ask for most

  • ✓ Root cause 84%
  • ✓ Supplier quality 63%
  • ✓ Control plans 58%
  • FMEA 53%
  • ✓ Six Sigma 47%
  • ✓ SPC 47%

✓ = this posting asks for it too. % = share of similar postings that mention it.

Stands out: this posting asks for Machining, Injection molding, which few similar roles mention. If you have it, lead with it.

It asks for 5+ years. If you're close, apply anyway: requirements are a wish list. Talk to someone doing this work there first.

At a glance

Pulled from the posting text. If it's not listed here, the posting didn't say.

How to get in at this plant

Five moves over a week or two. The first one takes ten minutes.

  1. 1

    Pick 2–3 people on the Quality team at MKS Instruments

    We found 9 people at this company and state: 6 in this kind of role, 3 leaders. Engineers who joined in the last year or two reply the most. See them ↓

  2. 2

    Send a short, curious note

    One real question about their work. No favors yet. Each person gets a different note, written for this role.

    Write to Tanner → (free)
  3. 3

    Turn a reply into a short call

    Questions worth asking about this team:

    • What does a normal week look like on your team?
    • Which standards drive the work here: ISO 13485, IATF 16949, AS9100?
    • How much of the job is customer complaints versus prevention?
    • How did you land the job? What stood out in your interviews?
  4. 4

    Apply with someone vouching for you

    If the call went well, ask whether they’d pass your résumé to the hiring manager. Send your résumé link, apply that day, and let them know.

  5. 5

    Bring proof to the interview

    One page of before-and-after numbers from projects you led: scrap, OEE, cycle time, cost. Plant managers hire on results.

This plant: MKS Instruments in Klamath Falls

No other open roles at this site right now · 9 people we found in quality roles at MKS Instruments.

Full description from MKS InstrumentsAs posted on their careers site.Show

requirements

are translated into effective production and inspection controls.

  • ✓Apply SPC, capability analysis, first-pass yield, defect pareto, and trend analysis to prevent escapes and reduce variation, scrap, and rework.
  • ✓Establish and sustain measurement methods, gage calibration, measurement system analysis, and inspection equipment controls appropriate to dimensional and surface-quality requirements.
  • ✓Support new product introduction and process changes through risk assessment, process qualification, first article approval, and production readiness reviews.
  • ✓Maintain product identification, traceability, inspection status, record retention, and final release controls.
Show full description ↓

A Day in Your Life at MKS

As the Senior Quality Engineer at the MKS ESI Klamath Falls manufacturing site, you will serve as the site’s primary quality resource and provide hands-on support for the production of precision consumable MLCC carrier plates. Working closely with Operations, Engineering, Supply Chain, and customers, you will own day-to-day product and process quality, sustain the ISO 9001:2015 quality management system, resolve internal and external quality issues, and lead practical improvements that protect delivery, cost, and customer performance. This role requires an experienced manufacturing quality professional who can operate independently, balance production urgency with disciplined quality controls, and build scalable processes appropriate for a small, high-mix/mid-to-high-volume operation.

Production Quality & Process Control

  • •Provide daily floor support for machining, finishing, cleaning, inspection, packaging, and release of consumable carrier plates.
  • •Develop and maintain control plans, inspection instructions, acceptance criteria, sampling plans, and reaction plans for critical product and process characteristics.
  • •Interpret customer drawings, specifications, tolerances, and workmanship requirements; ensure

Nonconformance, Corrective Action & Customer Quality

  • •Own the control and disposition of nonconforming material, including containment, segregation, material review documentation, and verification of rework or repair.
  • •Lead structured root cause investigations and corrective actions using 8D, 5-Why, fishbone, and risk-based problem-solving methods; verify effectiveness before closure.
  • •Coordinate responses to customer complaints, returns, corrective action requests, and quality inquiries with timely containment and fact-based communication.
  • •Analyze internal defects, customer escapes, and warranty or return data to identify systemic risks and prioritize prevention.

Quality Management System & Compliance

  • •Serve as the site focal point for the ISO 9001:2015 quality management system, ensuring required processes, procedures, records, and performance reviews remain effective and audit-ready.
  • •Plan and conduct internal audits; coordinate external certification and customer audits; manage findings, corrective actions, and on-time closure.
  • •Maintain document and change control, training competence records, calibration controls, quality records, and risk-based operational controls.
  • •Prepare quality inputs for management review, including objectives, KPI trends, audit results, customer performance, nonconformities, risks, and improvement actions.

Supplier Quality & Incoming Material

  • •Define incoming inspection and supplier controls based on material risk, historical performance, and process capability.
  • •Investigate supplier-related nonconformances, issue supplier corrective action requests, and verify corrective-action effectiveness.
  • •Partner with Supply Chain and suppliers on qualification, performance monitoring, change notification, and improvement of critical materials and outsourced processes.

Quality Metrics & Continuous Improvement

  • •Own a practical site quality dashboard covering customer complaints, defects, scrap, rework, first-pass yield, process capability, supplier performance, audit actions, and corrective-action closure.
  • •Facilitate cross-functional improvement projects using Lean, Six Sigma, mistake-proofing, standard work, and risk-reduction methods.
  • •Train and coach production personnel on inspection, defect recognition, nonconformance control, problem solving, and adherence to quality procedures.
  • •Escalate significant product, process, compliance, or customer risks and drive clear ownership and closure of corrective actions.

Skills You Bring

  • •Bachelor’s degree in Quality, Manufacturing, Mechanical, Industrial, Materials Engineering, or a related technical field; equivalent relevant experience may be considered.
  • •5+ years of hands-on quality engineering experience in a production environment, preferably involving precision machining, injection molding, either silicone (preferably) or other plastics, consumable tooling, electronics-related manufacturing, or similar engineered products.
  • •Demonstrated ability to independently support a small manufacturing site as the primary quality professional and influence results without a large supporting quality organization.
  • •Strong working knowledge of ISO 9001:2015, internal auditing, document control, corrective action, risk-based thinking, and management review.
  • •Proficiency in control plans, inspection planning, SPC, process capability, sampling, measurement system analysis, calibration, and basic statistical analysis.
  • •Experience leading root cause analysis and corrective action for internal defects, customer complaints, and supplier nonconformances.
  • •Ability to interpret engineering drawings, specifications, dimensional tolerances, and customer-specific quality requirements.
  • •Proficiency with common metrology tools and quality data systems; experience with ERP, Minitab or equivalent statistical software, and electronic QMS tools is preferred.
  • •Strong written and verbal communication skills, sound judgment, and the ability to work directl

More Quality roles nearby