Engineering Technician D - Lab Operations and Integration Test Support
L3Harris · Salt Lake City, UT
- Level
- Level: Engineer
- Team
- Team: Production
- Degree
- Degree: Required
- Experience asked
- Experience asked: 8+ years
- Industry
- Industry: Aerospace & defense
- Posted
- Posted: 5 days ago
The role in 30 seconds
An engineer-level production role at L3Harris (aerospace & defense) in Salt Lake City, UT.
- They ask for
- 8+ years · degree required
- Tools it names
- 5S
- Day to day
- some off-shift / weekend coverage
Read from the posting. The full description is below.
From the plant jobs report · week of November 16, 2026
Production Engineer roles in Utah: typical posted base $150k–$160k.
Median of the low and high ends of 4 live postings that list pay, out of 14 production engineer openings in Utah, read from manufacturers' own careers sites.
Utah plant jobs report →Pay by team and state →What moves pay →
How this role compares
Against 13 other live production postings in Utah.
- Experience asked
- More than usual (8+ vs 7+)
Similar roles usually ask 7+ years.
Skills these teams ask for most
- ✓ Team leadership 50%
- Lean 29%
- Cost reduction 29%
- Six Sigma 21%
- Root cause 21%
✓ = this posting asks for it too. % = share of similar postings that mention it.
At a glance
Pulled from the posting text. If it's not listed here, the posting didn't say.
How to get in at this plant
Five moves over a week or two. The first one takes ten minutes.
- 1
Pick 2–3 people on the Production team at L3Harris
Engineers who joined in the last year or two reply the most. Use the team search on this page to find them.
- 2
Send a short, curious note
One real question about their work. No favors yet. Each person gets a different note, written for this role.
- 3
Turn a reply into a short call
Questions worth asking about this team:
- What does a normal week look like on your team?
- How does off-shift and weekend coverage work?
- How did you land the job? What stood out in your interviews?
- 4
Apply with someone vouching for you
If the call went well, ask whether they’d pass your résumé to the hiring manager. Send your résumé link, apply that day, and let them know.
- 5
Bring proof to the interview
One page of before-and-after numbers from projects you led: scrap, OEE, cycle time, cost. Plant managers hire on results.
This plant: L3Harris in Salt Lake City
16 other open roles at this site.
- Specialist Quality Engineer · Quality
- Engineering Technician D · Manufacturing
- Manufacturing Technician B · Manufacturing · Technician
- Manager, Manufacturing Engineering · Manufacturing · Manager
- Engineering Technician C · Manufacturing
- Engineering Technician B · Manufacturing
Full description from L3HarrisAs posted on their careers site.ShowHide
requirements
and contractual obligations.
This lab-based position is responsible for tracking assets, coordinating repairs, performing preventive maintenance and inspections (PMI), maintaining calibration readiness, and preparing equipment for engineering and test activities. The successful candidate works independently with minimal supervision, troubleshoots electronic and RF equipment, coordinates priorities across engineering teams, and maintains a safe, organized, and ready laboratory.
Essential Functions
- ◆Maintain accurate asset records for laboratory equipment, tools, spares, circuit card assemblies (CCAs), and line-replaceable units (LRUs), including identification, location, custodian, configuration, and service status.
- ◆Support periodic inventories, equipment check-in and check-out, and accountability for company and customer-owned property.
- ◆Plan and perform PMI in accordance with approved procedures and manufacturer guidance. Document completed work, deficiencies, corrective actions, and upcoming maintenance requirements.
- ◆Coordinate equipment calibration schedules and service providers. Maintain calibration records and labels, verify calibration status before use, and flag and segregate overdue or out-of-tolerance equipment under established procedures.
- ◆Troubleshoot electronic, RF, and communications equipment at the component, CCA, LRU, and system levels. Perform authorized repairs and coordinate vendor repairs, returns, and follow-up verification.
- ◆Prepare laboratory configurations, racks, cabling, power supplies, instrumentation, and test articles for engineering development, system integration, verification, and customer test events.
- ◆Set up and operate oscilloscopes, digital multimeters, signal generators, spectrum analyzers, and other measuring and testing equipment.
- ◆Execute approved test procedures, collect and document results, and assist engineers in investigating failures, resolving discrepancies, and verifying corrective actions.
- ◆Support engineers in developing and improving test procedures, setup instructions, and troubleshooting methods for new designs and equipment changes.
- ◆Coordinate laboratory schedules and equipment availability with engineering and program teams. Identify resource shortages, maintenance conflicts, and readiness risks early to support critical milestones.
- ◆Support parts and material sourcing, bills of material, spare-equipment planning, and component obsolescence resolution through approved procurement channels and engineering coordination.
- ◆Maintain laboratory procedures, maintenance and repair histories, equipment configuration records, and test documentation using established document and revision controls.
- ◆Support integration and test readiness reviews by confirming equipment availability, calibration status, approved configurations, and required materials.
- ◆Apply electrostatic discharge controls, electrical and RF safety practices, and applicable property and security procedures.
- ◆Maintain orderly work areas using 5S principles and support continuous improvement that reduces equipment downtime, waste, and schedule risk.
- ◆Provide technical guidance and training to other technicians on approved laboratory and test procedures.
- ◆Maintain professional and ethical standards and perform other related duties as assigned by management.
- ◆Able to receive DoD security clearance.
Required Qualifications
- ✓High school diploma or equivalent and a minimum of 8 years of relevant experience.
- ✓2 year postsecondary or associate degree and a minimum of 4 years of related experience.
Show full description ↓Show less ↑
L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do.
L3Harris is the Trusted Disruptor in defense tech. With customers’ mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.
Job Title: Engineering Technician D — Lab Operations and Integration Test Support
Job Location: Salt Lake City, UT
Job Schedule: 9/80 (employee's work 9 out of every 14 days - totaling 80 hours worked - and have every other Friday off)
Position Overview
The Engineering Technician D - Lab Operations and Integration Test Support supports laboratory operations, equipment readiness, and system integration and testing for existing and new communications systems. Working closely with Systems Engineering, Integration and Test teams, and Program Management, this technician ensures engineers have the equipment, parts, tools, and test resources needed to meet program
Preferred Additional Skills
- +Top Secret clearance preferred when required by supported programs.
- +Experience testing and troubleshooting electronic or communications equipment using standard bench instrumentation.
- +Ability to interpret technical drawings, schematics, equipment manuals, and approved maintenance and test procedures.
- +Ability to maintain accurate equipment and service records, coordinate multiple priorities, and work independently while meeting critical deadlines.
- +Effective communication and problem-solving skills, with the ability to collaborate with engineers, technicians, program personnel, and support organizations.
- +Ability to support occasional work outside normal business hours, including nights and weekends, when required for integration and test events.
- +Experience with RF or military avionics systems, CCA and LRU troubleshooting, and system-level testing.
- +Experience supporting engineering development,
