Process Engineer
Koch Industries · Salisbury, MD
- Level
- Level: Engineer
- Team
- Team: Process
- Travel
- Travel: 10%
- Degree
- Degree: Required
- Experience asked
- Experience asked: 2+ years
- Industry
- Industry: Industrial
- Posted
- Posted: Recently
The role in 30 seconds
An engineer-level process role at Koch Industries (industrial) in Salisbury, MD. Implement, evaluate, and control manufacturing processes to consistently deliver product quality, reliability, and performance.
- They ask for
- 2+ years · degree required
- Tools it names
- Lean, Six Sigma, Root cause, SPC, ISO 9001, Validation (IQ/OQ/PQ)
- Day to day
- about 10% travel
Read from the posting. The full description is below.
From the plant jobs report · week of November 16, 2026
Process Engineer roles in Maryland: typical posted base $104k–$128k.
Median of the low and high ends of 9 live postings that list pay, out of 14 process engineer openings in Maryland, read from manufacturers' own careers sites.
Maryland plant jobs report →Pay by team and state →What moves pay →
How this role compares
Against 13 other live process postings in Maryland.
- Base pay
- Not listed in this posting
- Experience asked
- Less than usual (2+ vs 10+)
Typical $104k–$128k, from 9 postings that list pay.
Similar roles usually ask 10+ years.
Skills these teams ask for most
- ✓ Root cause 57%
- ✓ Automation 50%
- ✓ Validation (IQ/OQ/PQ) 36%
- ✓ Lean 36%
- ✓ Six Sigma 21%
- Cost reduction 21%
✓ = this posting asks for it too. % = share of similar postings that mention it.
Stands out: this posting asks for SPC, ISO 9001, Robotics, which few similar roles mention. If you have it, lead with it.
At a glance
Pulled from the posting text. If it's not listed here, the posting didn't say.
How to get in at this plant
Five moves over a week or two. The first one takes ten minutes.
- 1
Pick 2–3 people on the Process team at Koch Industries
Engineers who joined in the last year or two reply the most. Use the team search on this page to find them.
- 2
Send a short, curious note
One real question about their work. No favors yet. Each person gets a different note, written for this role.
- 3
Turn a reply into a short call
Questions worth asking about this team:
- What does a normal week look like on your team?
- Is the work mostly new product launches or sustaining existing lines?
- How much time do you spend on the floor versus at a desk?
- The posting says about 10% travel. Between which sites?
- How did you land the job? What stood out in your interviews?
- 4
Apply with someone vouching for you
If the call went well, ask whether they’d pass your résumé to the hiring manager. Send your résumé link, apply that day, and let them know.
- 5
Bring proof to the interview
One page of before-and-after numbers from projects you led: scrap, OEE, cycle time, cost. Plant managers hire on results.
Process Engineer at Koch Industries in other locations
Koch Industries lists this title in 8 places. Pick the plant you can get to.
Full description from Koch IndustriesAs posted on their careers site.ShowHide
What You Will Do
- ◆Implement, evaluate, and control manufacturing processes to consistently deliver product quality, reliability, and performance.
- ◆Support new product introduction (NPI), prototyping, qualification, validation, and technology transfer from engineering and development into manufacturing.
- ◆Conduct root cause analysis using structured, data-driven problem-solving techniques to resolve process, equipment, and product issues and reduce process variation.
- ◆Develop and maintain process methodologies, work instructions, technical training materials, and preventative maintenance plans for critical equipment and processes.
- ◆Partner with manufacturing, quality, design engineering, suppliers, IT, and equipment manufacturers to evaluate and implement new materials, equipment, automation, and manufacturing technologies.
- ◆Identify, evaluate, and implement manufacturing technologies, automation, digital tools, and equipment that improve safety, quality, delivery, productivity, cost, and process capability.
- ◆Lead or support technology trials, proof-of-concept activities, pilot programs, and process experiments, using manufacturing data and statistical analysis to evaluate feasibility, validate results, and build technical and business justification for implementation.
Who You Are (Basic Qualifications)
- ✓Bachelor’s degree in Engineering or a related technical field.
- ✓Minimum of 2 years of process engineering experience in a manufacturing environment.
- ✓Hands-on experience with manufacturing processes and production equipment, including equipment operation and troubleshooting.
- ✓Experience using manufacturing/process data and structured problem-solving methods to identify issues, improve processes, and validate results.
- ✓Experience implementing or supporting manufacturing process improvements involving new equipment, automation, or manufacturing technology.
Requirements
- ✓Ability to travel domestically as needed, less than 10%.
- ✓Ability to balance innovation with practical implementation, ensuring new technologies deliver measurable operational and business value.
At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value, and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided considering each candidate's knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and details of our compensation philosophy.
Export Control
Requirements
In order to comply with U.S. export control laws and regulations, this position requires applicants to either provide proof of U.S. citizenship or lawful permanent resident status or be eligible to receive an export authorization (a license) under the International Traffic in Arms Regulations and/or the Export Administration Regulations.
Hiring Philosophy
All Koch companies value diversity of thought, perspectives, aptitudes, experiences, and backgrounds. We are Military Ready and Second Chance employers. Learn more about our hiring philosophy .
Show full description ↓Show less ↑
Your Job
Smith’s Interconnect, a Molex company, is seeking a Process Engineer in Salisbury, MD to play a critical role in optimizing our manufacturing processes, ensuring they operate within established parameters while maintaining high standards of quality, reliability, and performance.
This role will also help advance manufacturing technology by identifying, evaluating, and implementing automation, digital tools, advanced equipment, and process solutions that improve safety, quality, delivery, productivity, cost, and overall manufacturing capability.
The ideal candidate combines strong process engineering fundamentals with hands-on manufacturing experience and the ability to translate new technologies and data-driven insights into practical manufacturing solutions.
Our Team
You'll work collaboratively with cross-functional teams to support new product introduction, drive continuous improvement, and implement robust process solutions aligned with our business strategy.
You will help identify and advance manufacturing technologies and methods that strengthen technical capabilities, improve efficiency, reduce process variation, and support the evolution of our manufacturing operations.
What Will Put You Ahead
- •Experience with process control, statistical process control (SPC), Lean Manufacturing, Six Sigma, or quality management systems such as ISO 9001.
- •Experience supporting new product introduction (NPI), process validation, and technology transfer into manufacturing.
- •Experience implementing advanced manufacturing technologies such as automation, robotics, machine vision, sensors, automated inspection, or additive manufacturing.
- •Experience developing and evaluating proof-of-concept solutions, technology pilots, or business/ROI justifications for manufacturing technology and equipment investments.
Additional
Who We Are
With a strong legacy of engineering excellence, Smiths Interconnect, a Molex company, is part of Molex's Aerospace & Defense Solutions Division and represents the Signal Technologies business unit.
Smith’s Interconnect delivers mission-critical connectivity solutions, including ruggedized connectors, cable assemblies, Fiber & RF, and high-reliability technologies, designed to perform in the most demanding environments. From aerospace and defense to space, medical, and industrial applications, our innovative products enable reliability where it matters most.
Join a passionate, global team helping shape the future of high-reliability interconnect solutions.
At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash th
More Process roles nearby
- Process Engineer I · Hitchiner Manufacturing · Milford · 38 mi
- Senior / Principal Welding Process Engineer · The Dixon Group · Stevensville · 57 mi
- Senior Cybersecurity Process Engineer · Peraton · Fort Meade · 80 mi
- Principal Engineer, Manufacturing Processes. Global · Baltimore Aircoil Company · Jessup · 83 mi
