ShopFloorJobs
KI

Automation Engineer

Koch Industries · Hudson, WI

Level
Level: Engineer
Team
Team: Controls
Degree
Degree: Required
Experience asked
Experience asked: 2+ years
Industry
Industry: Industrial
Posted
Posted: Recently

The role in 30 seconds

An engineer-level controls role at Koch Industries (industrial) in Hudson, WI. In this role you will focus on the installation, qualification, optimization, and ongoing support of EBO (Extended Beam Optic) and Flat Lapping Machine (FLM) manufacturing equipment used in fiber optic assembly operations.

They ask for
2+ years · degree required
Tools it names
Lean, Six Sigma, OEE, Root cause, SPC, FMEA

Read from the posting. The full description is below.

From the plant jobs report · week of November 16, 2026

Controls Engineer roles in Wisconsin: typical posted base $86k–$127k.

Median of the low and high ends of 9 live postings that list pay, out of 25 controls engineer openings in Wisconsin, read from manufacturers' own careers sites.

Wisconsin plant jobs report →Pay by team and state →What moves pay →

How this role compares

Against 24 other live controls postings in Wisconsin.

Base pay
Not listed in this posting

Typical $86k–$127k, from 9 postings that list pay.

Experience asked
Less than usual (2+ vs 5+)

Similar roles usually ask 5+ years.

Skills these teams ask for most

  • ✓ Automation 64%
  • PLC 56%
  • ✓ Validation (IQ/OQ/PQ) 36%
  • ✓ Root cause 36%
  • Robotics 36%
  • EHS / safety 24%

✓ = this posting asks for it too. % = share of similar postings that mention it.

Stands out: this posting asks for SPC, Control plans, MSA / Gage R&R, DOE, which few similar roles mention. If you have it, lead with it.

It asks for 2+ years. If you're close, apply anyway: requirements are a wish list. Talk to someone doing this work there first.

At a glance

Pulled from the posting text. If it's not listed here, the posting didn't say.

How to get in at this plant

Five moves over a week or two. The first one takes ten minutes.

  1. 1

    Pick 2–3 people on the Controls team at Koch Industries

    Engineers who joined in the last year or two reply the most. Use the team search on this page to find them.

  2. 2

    Send a short, curious note

    One real question about their work. No favors yet. Each person gets a different note, written for this role.

  3. 3

    Turn a reply into a short call

    Questions worth asking about this team:

    • What does a normal week look like on your team?
    • How did you land the job? What stood out in your interviews?
  4. 4

    Apply with someone vouching for you

    If the call went well, ask whether they’d pass your résumé to the hiring manager. Send your résumé link, apply that day, and let them know.

  5. 5

    Bring proof to the interview

    One page of before-and-after numbers from projects you led: scrap, OEE, cycle time, cost. Plant managers hire on results.

This plant: Koch Industries in Hudson

5 other open roles at this site.

Full description from Koch IndustriesAs posted on their careers site.Show

requirements

and ensure we can build to scale.

Our Team

Molex brings together innovation and technology to deliver electronic solutions to customers worldwide. With a presence in more than 40 countries, Molex offers a full suite of solutions and services for many markets, including data communications, consumer electronics, industrial, automotive, commercial vehicle and medical.

What You Will Do

  • ◆Lead installation, startup, calibration, and commissioning of EBO and FLM machines based on instruction. Work with Zhuhai automation team on site or remotely.
  • ◆Develop and execute equipment qualification protocols (Installation, Operational and Performance Qualification).
  • ◆Support production readiness activities and process validation.
  • ◆Communicate and discuss the status or plan of automation machine with Zhuhai automation team, either periodically or as needed.
  • ◆Drive deployment of new automation technologies into production
  • ◆Program, troubleshoot, spare parts management, systems upgrade minute adjustment.
  • ◆Develop machine control strategies to improve repeatability and yield.
  • ◆Help with process engineer to develop tooling designs or semi-automated, automated designs that enhance efficiency.
  • ◆Support MES, data collection, and traceability systems.
  • ◆Implement automated process monitoring and alarms.
  • ◆Improve cycle time, OEE, machine uptime, and labor efficiency.
  • ◆Analyze process capability and equipment performance metrics.
  • ◆Conduct DOE, Gage R&R, and process capability studies.
  • ◆Optimize alignment, polishing, laser processing, and assembly processes series of Fiber Optic Connectors.
  • ◆Support continuous improvement initiatives using Lean and Six Sigma tools
  • ◆Provide technical support for production issues.
  • ◆Perform root cause analysis and implement corrective actions.
  • ◆Establish preventive maintenance procedures.
  • ◆Support equipment troubleshooting and emergency recovery activities.
  • ◆Train operators, technicians, and overall manufacturing and support personnel.
  • ◆Create and maintain: Work Instructions, Standard Operating Procedures, Preventive Maintenance Plans, Equipment Qualification Reports, PFMEA and Control Plans
  • ◆Ensure compliance with quality systems, ISO requirements, and EH&S standards

Who You Are (Basic Qualifications)

  • ✓Bachelor’s degree in engineering, Automation, Mechanical, Mechatronics, Manufacturing, or related field.
  • ✓2+ years of experience in a Manufacturing Automation environment.
  • ✓Experience working with automated manufacturing environments to improve efficiency
  • ✓Able to read and modify mechanical drawings (by SolidWorks or UG).
  • ✓Able to read electrical schematics and pneumatic diagrams.
  • ✓Skilled in commissioning and signal tuning of servo or stepper motors or motorized stage, pneumatics, sensors
  • ✓Familiar with common machining materials
  • ✓Experience completing full cycles of new machine launch, on-site commissioning integration, and optimization for mass production
  • ✓Strong troubleshooting and RCA skills
Show full description ↓

Your Job

Molex is seeking a new Automation Engineer to join our team in Hudson, WI. We are expanding our production capabilities and seeking a new team member to help support this growth. You may not see our name on the shelves, but our electronic solutions are inside the products you use every day. We work together with the world’s innovators to design and manufacture electronic solutions that solve complex technical challenges.

In this role you will focus on the installation, qualification, optimization, and ongoing support of EBO (Extended Beam Optic) and Flat Lapping Machine (FLM) manufacturing equipment used in fiber optic assembly operations. This role drives equipment performance, process automation, reliability, throughput improvement, and new technology deployment while supporting New Product Introduction (NPI) and production operations.

You will be expected to be the main process contact for specific projects/opportunities while collaborating with our NPI team and operators to build prototypes that meet customer

What Will Put You Ahead

  • •Experience with fiber optic connector manufacturing.
  • •Experience supporting: EBO equipment, FLM equipment, Laser processing systems, Polishing systems, and Precision alignment systems
  • •Knowledge of: Six Sigma, DOE, PFMEA, MSA / Gage R&R, Statistical Process Control (SPC)
  • •Familiarity with machine vision inspection and automated test systems.

This position is not eligible for VISA Sponsorship.

In order to comply with U.S. export control laws and regulations, this position requires applicants to either provide proof of U.S. citizenship or lawful permanent resident status or be eligible to receive an export authorization (a license) under the International Traffic in Arms Regulations and/or the Export Administration Regulations.

At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided considering each candidate's knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy.

Hiring Philosophy

All Koch companies value diversity of thought, perspectives, aptitudes, experiences, and backgrounds. We are Military Ready and Second Chance employers. Learn more about our hiring philosophy here .

Who We Are

As a Koch company, Molex is a leading supplier of connectors and interconnect components, driving innovation in electronics and supporting industries from automotive to health care and consumer to data communications. The thousands of innovators who work for Molex have made us a global electronics leader. Our experienced people, groundbreaking products and leading-edge technologies help us del

More Controls roles nearby