Manufacturing Engineer III
Kaman · Long Beach, CA
- Level
- Level: Senior
- Team
- Team: Manufacturing
- Experience asked
- Experience asked: 5+ years
- Certification
- Certification: Green Belt preferred
- Industry
- Industry: Aerospace & defense
- Posted
- Posted: 21 days ago
The role in 30 seconds
A senior manufacturing role at Kaman (aerospace & defense) in Long Beach, CA. Support process trials, production builds, and manufacturing studies used to establish or improve process capability.
- They ask for
- 5+ years · Green Belt preferred
- Tools it names
- Lean, Root cause, GD&T, Validation (IQ/OQ/PQ), Automation, Injection molding
Read from the posting. The full description is below.
From the plant jobs report · week of November 16, 2026
Manufacturing Engineer roles in California: typical posted base $115k–$173k.
Median of the low and high ends of 195 live postings that list pay, out of 492 manufacturing engineer openings in California, read from manufacturers' own careers sites.
California plant jobs report →Pay by team and state →What moves pay →
How this role compares
Against 491 other live manufacturing postings in California.
- Base pay
- Not listed in this posting
- Experience asked
- Typical (5+ years)
Typical $110k–$165k, from 173 postings that list pay.
Similar roles usually ask 5+ years.
Skills these teams ask for most
- ✓ Tooling 50%
- ✓ New product launch 43%
- ✓ Root cause 38%
- ✓ Automation 33%
- ✓ Lean 28%
- ✓ Validation (IQ/OQ/PQ) 27%
✓ = this posting asks for it too. % = share of similar postings that mention it.
Stands out: this posting asks for Injection molding, Extrusion, Painting / coating, which few similar roles mention. If you have it, lead with it.
At a glance
Pulled from the posting text. If it's not listed here, the posting didn't say.
How to get in at this plant
Five moves over a week or two. The first one takes ten minutes.
- 1
Pick 2–3 people on the Manufacturing team at Kaman
We found 2 people at this company and state: 1 in this kind of role, 1 leaders, plus 1 likely hiring manager. Engineers who joined in the last year or two reply the most. See them ↓
- 2
Send a short, curious note
One real question about their work. No favors yet. Each person gets a different note, written for this role.
Write to Bob → (free) - 3
Turn a reply into a short call
Questions worth asking about this team:
- What does a normal week look like on your team?
- Is the work mostly new product launches or sustaining existing lines?
- How much time do you spend on the floor versus at a desk?
- The posting mentions a Green Belt. Does the company sponsor certification?
- How did you land the job? What stood out in your interviews?
- 4
Apply with someone vouching for you
If the call went well, ask whether they’d pass your résumé to the hiring manager. Send your résumé link, apply that day, and let them know.
- 5
Bring proof to the interview
One page of before-and-after numbers from projects you led: scrap, OEE, cycle time, cost. Plant managers hire on results.
This plant: Kaman in Long Beach
4 other open roles at this site · 2 people we found in manufacturing roles at Kaman.
- Extrusion Manufacturing Technician (2nd Shift) · Manufacturing · Technician
- Tooling Maintenance Technician · Reliability · Technician
- Director of Product & Process Engineering · Process · Director+
- Manufacturing Technician 1 (2nd Shift) · Manufacturing · Technician
Full description from KamanAs posted on their careers site.ShowHide
Responsibilities
As an NPI Manufacturing Engineer III, the role is instrumental in supporting new product introduction, manufacturing process development, production readiness, technical problem-solving, and continuous improvement.
New Product Introduction and Process Development
· Develop and transfer new products into production by analyzing product requirements, defining manufacturing methods, and supporting production implementation.
· Develop, document, validate, and improve manufacturing process sequences, tooling approaches, equipment requirements, and production controls.
· Translate product, drawing, customer, and contractual
requirements
into manufacturable process plans, including BOMs, routers, work instructions, inspection support documentation, and labor assumptions.
· Support manufacturing readiness activities for assigned programs, including prototype builds, pilot builds, first article support, production readiness reviews, and handoff to operations.
· Review product designs and technical
requirements
to identify manufacturability risks, process constraints, tooling needs, inspection challenges, and cost drivers.
· Work with cross-functional teams to define process flow, production sequence, equipment needs, operator requirements, and launch readiness actions.
· Support phase gate activities by completing assigned manufacturing engineering deliverables and communicating risks, open actions, and required resources.
Rubber Manufacturing and Process Support
· Apply knowledge of rubber manufacturing processes, including compression molding, transfer molding, injection molding, extrusion, bonding, coating, and secondary operations as applicable.
· Support development and optimization of manufacturing processes for elastomeric and polymer-based products.
· Define process parameters, tooling needs, equipment requirements, and manufacturing controls to support repeatable product and process capability.
· Support tooling, fixtures, jigs, templates, and manufacturing aids required for manufacturability, repeatability, safety, ergonomics, and efficiency.
· Partner with Design Engineering to support design for manufacturability, producibility, inspection feasibility, and cost effectiveness.
· Evaluate manufacturing methods and equipment options by considering product requirements, process capability, labor needs, safety, quality, and capacity.
· Support process trials, production builds, and manufacturing studies used to establish or improve process capability.
Quality, Compliance, and Documentation
· Support compliance with applicable QMS requirements, engineering procedures, customer requirements, and aerospace/defense expectations.
· Support contract and technical requirement reviews to identify manufacturing feasibility, capability, cost, documentation, and compliance risks.
· Participate in phase gate, QMS, and controlled documentation processes.
· Create, review, and maintain manufacturing documentation, including BOMs, routers, work instructions, process flows, production readiness records, and supporting technical documentation.
· Support GD&T interpretation, drawing review, mechanical testing, inspection planning, and process validation
requirements
as needed.
· Ensure manufacturing documentation clearly communicates process steps, tooling requirements, equipment requirements, inspection points, safety considerations, and quality controls.
· Support development and maintenance of labor standards and process assumptions used to evaluate direct labor, indirect labor, machine performance, capacity, and cost.
Problem Solving and Continuous Improvement
· Participate in root cause analysis and corrective action activities related to NPI builds, production launch issues, scrap, rework, quality escapes, or process instability.
· Apply structured problem-solving methods to analyze product and process performance.
· Use data, observation, production feedback, inspection results, and technical judgment to identify process improvement opportunities.
· Support productivity improvements, waste elimination, labor reduction, cycle-time improvement, cost-reduction, 6S, and Lean Manufacturing initiatives.
· Evaluate recurring production issues and recommend process, documentation, tooling, equipment, or training improvements to improve stability and repeatability.
· Support capital equipment, tooling, automation, and manufacturing improvement opportunities through technical, functional, and financial input.
Cross-Functional Program Support
· Work with Design Engineering, Quality, Operations, Supply Chain, Tooling, Planning, and Program Management to support successful product launch.
· Communicate technical risks, schedule impacts, resource needs, process constraints, and recommended actions to stakeholders.
· Forecast labor, equipment, capacity, tooling, and process resource needs to suppo
Show full description ↓Show less ↑
Rubbercraft is seeking an Manufacturing Engineer III - NPI to join our organization and support the introduction, development, validation, and transition of new products into the manufacturing environment. The NPI Manufacturing Engineer III is a capable manufacturing engineering contributor responsible for developing manufacturing processes, supporting producibility, improving process capability, and supporting successful production launch of rubber and elastomer-based products.
This role supports new product introduction activities with limited supervision and works closely with cross-functional teams to ensure new products meet safety, quality, delivery, cost, customer, regulatory, and manufacturability requirements.
About Rubbercraft: Rubbercraft is a trusted leader in engineered elastomer solutions serving the aerospace, defense, and industrial markets. We design and manufacture precision-molded seals, gaskets, and custom rubber components that perform in the world's most demanding environments. Our culture is built on innovation, collaboration, quality, and customer commitment.
