ShopFloorJobs
Johnson & Johnson MedTech logo

Staff NPI Engineer - Johnson and Johnson MedTech, Circulatory Restoration

Johnson & Johnson MedTech · Santa Clara, CA

Level
Level: Senior
Team
Team: Manufacturing
Base pay
Base pay: $129k–$208k
Experience asked
Experience asked: 8+ years
Industry
Industry: Medical devices
Posted
Posted: 6 days ago
Apply on Johnson ↗

The role in 30 seconds

A senior manufacturing role at Johnson & Johnson MedTech (medical devices) in Santa Clara, CA. Analyze, evaluate, source, and coordinate procurement of new materials to support prototyping pilot operations, and design verification and validation activities.

They ask for
8+ years
Tools it names
DMAIC, FMEA, Validation (IQ/OQ/PQ), Time studies, Tooling
Base pay
$129k–$208k

Read from the posting. The full description is below.

From the plant jobs report · week of November 16, 2026

Manufacturing Engineer roles in California: typical posted base $115k–$173k. This one lists $129k–$208k.

Median of the low and high ends of 195 live postings that list pay, out of 492 manufacturing engineer openings in California, read from manufacturers' own careers sites.

California plant jobs report →Pay by team and state →What moves pay →

How this role compares

Against 491 other live manufacturing postings in California.

Base pay
About 23% above similar roles

Typical $110k–$165k, from 172 postings that list pay.

Experience asked
More than usual (8+ vs 5+)

Similar roles usually ask 5+ years.

Skills these teams ask for most

  • ✓ Tooling 50%
  • ✓ New product launch 43%
  • Root cause 38%
  • Automation 33%
  • Lean 28%
  • ✓ Validation (IQ/OQ/PQ) 27%

✓ = this posting asks for it too. % = share of similar postings that mention it.

Stands out: this posting asks for DMAIC, Time studies, which few similar roles mention. If you have it, lead with it.

It asks for 8+ years. If you're close, apply anyway: requirements are a wish list. Talk to someone doing this work there first.

At a glance

Pulled from the posting text. If it's not listed here, the posting didn't say.

How to get in at this plant

Five moves over a week or two. The first one takes ten minutes.

  1. 1

    Pick 2–3 people on the Manufacturing team at Johnson & Johnson MedTech

    We found 3 people at this company and state: 3 in this kind of role. Engineers who joined in the last year or two reply the most. See them ↓

  2. 2

    Send a short, curious note

    One real question about their work. No favors yet. Each person gets a different note, written for this role.

    Write to John → (free)
  3. 3

    Turn a reply into a short call

    Questions worth asking about this team:

    • What does a normal week look like on your team?
    • Is the work mostly new product launches or sustaining existing lines?
    • How much time do you spend on the floor versus at a desk?
    • How did you land the job? What stood out in your interviews?
  4. 4

    Apply with someone vouching for you

    If the call went well, ask whether they’d pass your résumé to the hiring manager. Send your résumé link, apply that day, and let them know.

  5. 5

    Bring proof to the interview

    One page of before-and-after numbers from projects you led: scrap, OEE, cycle time, cost. Plant managers hire on results.

This plant: Johnson & Johnson MedTech in Santa Clara

9 other open roles at this site · 3 people we found in manufacturing roles at Johnson & Johnson MedTech.

All 10 roles at Johnson & Johnson MedTech →
Full description from Johnson & Johnson MedTechAs posted on their careers site.Show

At Johnson & Johnson, we believe health is everything. Our strength in healthcare innovation empowers us to build a world where complex diseases are prevented, treated, and cured, where treatments are smarter and less invasive, and solutions are personal. Through our expertise in Innovative Medicine and MedTech, we are uniquely positioned to innovate across the full spectrum of healthcare solutions today to deliver the breakthroughs of tomorrow, and profoundly impact health for humanity. Learn more at jnj.com

As guided by Our Credo, Johnson & Johnson is responsible to our employees who work with us throughout the world. We provide an inclusive work environment where each person is considered as an individual. At Johnson & Johnson, we respect the diversity and dignity of our employees and recognize their merit.

Job Function

R&D Product Development

Show full description ↓

Job Sub Function

Biomedical Engineering

Job Category

Scientific/Technology

All Job Posting Locations

Santa Clara, California, United States of America

Job Description

Johnson & Johnson is hiring for a Staff NPI Engineer to join our team located in Santa Clara, CA.

At Johnson & Johnson, we believe health is everything. Our strength in healthcare innovation empowers us to build a world where complex diseases are prevented, treated, and cured, where treatments are smarter and less invasive, and solutions are personal. Through our expertise in Innovative Medicine and MedTech, we are uniquely positioned to innovate across the full spectrum of healthcare solutions today to deliver the breakthroughs of tomorrow, and profoundly impact health for humanity. Learn more at https://www.jnj.com/.

Cardiovascular Solutions from Johnson & Johnson

Across Johnson & Johnson, we are tackling the world’s most complex and pervasive health challenges. Through a cardiovascular portfolio that provides healthcare professionals with advanced mapping and navigation, miniaturized tech, and precise ablation, we are addressing conditions with significant unmet needs such as heart failure, coronary and peripheral artery disease, stroke, and atrial fibrillation. We are the global leaders in heart recovery, circulatory restoration and the treatment of heart rhythm disorders, as well as an emerging leader in neurovascular care, committed to taking on two of the leading causes of death worldwide in heart failure and stroke. For more information on circulatory restoration, visit our website.

Position Overview

The Staff NPI Engineer will utilize technical skills in the development of innovative products to treat peripheral, coronary, and heart valve diseases. The Staff NPI Engineer will serve as a subject matter expert for the process development team, provide oversight to pilot manufacturing/testing, and guide products as they transition from development into full production. This position will participate in multiple cross-functional development teams, focusing on design for manufacturability, process optimization, and sustaining activities.

The Staff NPI Engineer will develop, validate, and implement various processes by working closely with R\&D, Operations, Regulatory, and Quality teams to support the company’s manufacturing operations and product launch timelines. This role is responsible for designing, developing, testing, documenting, and implementing processes, tooling, and fixtures throughout the product lifecycle—from design through production.

Essential Job Functions

  • •Collaborate with R&D, QA, and Production departments to design, develop, test, document, and implement processes, tooling, and fixtures.
  • •Develop, validate, and maintain test methods.
  • •Develop new catheter manufacturing processes based on design intent and DFM principles.
  • •Develop and maintain technical documentation such as drawings for equipment, fixtures, components, and assemblies used in manufacturing processes.
  • •Performs testing, analyzes results and provides recommendations for design selection.
  • •Analyze, evaluate, source, and coordinate procurement of new materials to support prototyping pilot operations, and design verification and validation activities.
  • •Develop protocols/reports and perform product in-vitro, in-vivo as well as verification and validation testing.
  • •Participates in technical design reviews to ensure all design inputs and user needs are met.
  • •Collect data and analyze process performance and capabilities for both new and existing products.
  • •Perform tolerance analysis for components, manufacturing materials, packaging, and supplies used for in-house processing.
  • •Lead efforts to develop and maintain Process Failure Modes and Effects Analyses (pFMEAs).
  • •Prepare user requirements, technical specifications, and design documentation.
  • •Identify process requirements, support operations management, and implement necessary equipment and fixtures needed for process development and manufacturing efforts.
  • •Support product development teams in executing projects from concept to commercialization.
  • •Contribute to base business and continuous improvement initiatives.
  • •Support pilot manufacturing and serve as a subject matter expert on design-related inquiries, including regulatory submissions.
  • •Ensure proper documentation and compliance with the company’s quality policy, system, and objectives.
  • •Maintain documentation for design control, product configurations, manufacturing procedures, lot history records, (e.g., bills-of-materials, MPI’s, LHR’s), and other Quality System requirements.
  • •Evaluate and improve existing engineering processes.
  • •Lead or participate in problem-solving initiatives using the DMAIC methodology.
  • •Lead or support process/product improvement projects in collaboration with R&D engineers and technicians.
  • •Assist Procurement and R&D in supplier selection and technical development
  • •Recommend and implement new technologies to enhance system performance and reliability.
  • •Conduct productivity and costing analyses (e.g., time studies, direct labor/m

More Manufacturing roles nearby