ShopFloorJobs
GD

Quality Manager

Great Dane · Statesboro, GA

Level
Level: Manager
Team
Team: Quality
Degree
Degree: Required
Experience asked
Experience asked: 5+ years
Certification
Certification: Black Belt preferred
Industry
Industry: Automotive
Posted
Posted: Recently
Apply on Great Dane ↗

The role in 30 seconds

A management quality role at Great Dane (automotive) in Statesboro, GA. Develop a comprehensive product quality management program (including both quality assurance and quality control) for Great Dane manufacturing location.

They ask for
5+ years · degree required · Black Belt preferred
Tools it names
Lean, Six Sigma, Black Belt, Value stream mapping, TPM, OEE

Read from the posting. The full description is below.

From the plant jobs report · week of November 16, 2026

Quality Engineer roles in Georgia: typical posted base $85k–$131k.

Median of the low and high ends of 10 live postings that list pay, out of 35 quality engineer openings in Georgia, read from manufacturers' own careers sites.

Georgia plant jobs report →Pay by team and state →What moves pay →

How this role compares

Against 34 other live quality postings in Georgia.

Base pay
Not listed in this posting

Typical $85k–$131k, from 9 postings that list pay.

Experience asked
Typical (5+ years)

Similar roles usually ask 5+ years.

Skills these teams ask for most

  • Root cause 60%
  • ✓ Six Sigma 34%
  • ✓ SPC 31%
  • ✓ FMEA 31%
  • ✓ GD&T 31%
  • ✓ New product launch 26%

✓ = this posting asks for it too. % = share of similar postings that mention it.

Stands out: this posting asks for Black Belt, TPM, OEE, SMED, which few similar roles mention. If you have it, lead with it.

It asks for 5+ years. If you're close, apply anyway: requirements are a wish list. Talk to someone doing this work there first.

At a glance

Promotion path mentioned

Pulled from the posting text. If it's not listed here, the posting didn't say.

How to get in at this plant

Five moves over a week or two. The first one takes ten minutes.

  1. 1

    Pick 2–3 people on the Quality team at Great Dane

    Engineers who joined in the last year or two reply the most. Use the team search on this page to find them.

  2. 2

    Send a short, curious note

    One real question about their work. No favors yet. Each person gets a different note, written for this role.

  3. 3

    Turn a reply into a short call

    Questions worth asking about this team:

    • What does a normal week look like on your team?
    • Which standards drive the work here: ISO 13485, IATF 16949, AS9100?
    • How much of the job is customer complaints versus prevention?
    • The posting mentions a Black Belt. Does the company sponsor certification?
    • How did you land the job? What stood out in your interviews?
  4. 4

    Apply with someone vouching for you

    If the call went well, ask whether they’d pass your résumé to the hiring manager. Send your résumé link, apply that day, and let them know.

  5. 5

    Bring proof to the interview

    One page of before-and-after numbers from projects you led: scrap, OEE, cycle time, cost. Plant managers hire on results.

This plant: Great Dane in Statesboro

4 other open roles at this site.

Full description from Great DaneAs posted on their careers site.Show

The role

At Great Dane, we rely on makers and we’re calling on them to join our expanding team, the time has never been better to Embrace Your Great and work in an environment with the highest safety standards in the industry.

The position: Under the direction of the Plant Manager and Corporate Director of Quality, the Quality Manager owns the Quality system at the plant level and is responsible for effective execution and governance using Quality gates and KPI performance.

requirements

as the voice of Great Dane’s customers.

  • ✓Coordinate with Sales, Purchasing, Engineering, Production, and Maintenance to resolve customer complaints and concerns.
  • ✓Serve as a key member of the Plant Senior Leadership Team, supporting achievement of Safety, Quality, delivery and Cost targets for the GD manufacturing Plant.
  • ✓Other duties as assigned.

Your skills and abilities (required qualifications)

  • ✓Education: bachelor’s degree in mechanical or manufacturing Engineering. Other technical degrees accepted.
  • ✓Experience: 3-5 years of related and/or training, or equivalent combination of education and experience.
  • ✓Skills:
  • ✓Quality Management System Experience – ISO, TS16949
  • ✓A minimum of 5 years’ experience in Continuous Improvement and/or Advanced Quality Systems leadership; a minimum of 2 years’ experience in manufacturing.
  • ✓ASQ CQE/CQM Certification
  • ✓Built in quality experience.
  • ✓KPI management
  • ✓Trailer manufacturing and assembly
  • ✓AQL, inspection, and testing
  • ✓Data capture and analysis; corrective and preventive actions
  • ✓Process control/statistical process control
  • ✓FMEA
  • ✓Control plans
  • ✓Gage R&R
  • ✓Design of experiments
  • ✓Stack up and critical dimensions.
  • ✓GD&T
  • ✓Design for manufacture and assembly
  • ✓Design verification and validation
  • ✓Finite element analysis
  • ✓Standard work and error proofing
  • ✓SMED
  • ✓TPM & OEE
  • ✓6S & visual factory
  • ✓Value stream mapping
  • ✓Analytical thinking
  • ✓Data analysis and reporting
  • ✓Problem solving
  • ✓Change leadership
  • ✓Continuous improvement
  • ✓Lean certified
  • ✓Six Sigma Black Belt /MBB
  • ✓Advanced excel, macros, VB tools.
  • ✓ERP & JD Edward proficiency
  • ✓Travel: Travel as needed to assist with the HRIS system implementation and support needs for our location.

Requirements

The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

  • ✓Physical demands: While performing duties of job, employee is occasionally required to stand; walk; sit; use hands to finger, handle or feel objects; reach with hands and arms; talk and hear. Specific vision abilities required by the job include close and distance vision.
  • ✓Work environment: The noise level in the work environment is usually minimal to moderate.
Show full description ↓

Overview

What you’ll do

  • •Develop a comprehensive product quality management program (including both quality assurance and quality control) for Great Dane manufacturing location.
  • •Collaborate with Great Dane’s leadership team for planning, execution, and oversight of the product quality management program and continuous process improvement.
  • •Define, develop, and implement short-term and long-term strategies, goals, objectives, and tactics relating to quality management.
  • •Develop/maintain Quality key performance indicators (KPIs) including Quality Gates and analyze for opportunities to optimize performance.
  • •Use Lean Alert activities and processes to drive product quality improvements and respond to process, product, and service issues.
  • •Assists with the implementation of Lean Manufacturing goals and strategies for improving the operations and processes within the organization. Employs Lean methodologies and tools to accomplish business objectives.
  • •Develops and analyzes statistical data and product/process specifications to determine present standards and establish proposed quality and reliability expectancy of finished product.
  • •Formulates and maintains quality assurance objectives and aligns those objectives with production procedures in coordination with other managers to maximize product reliability and minimize costs (including quality failure cost, scrap).
  • •Directs team members engaged in inspection and testing activities to ensure continuous control over materials, facilities, and products.
  • •Plans, promotes, and organizes training activities related to product quality and reliability.
  • •Investigates and adjusts customer concerns regarding quality.
  • •Collaborate with Great Dane’s quality and engineering personnel to determine critical part features and review manufacturability of design. Make recommendations to modify customer part specifications and tolerances as necessary to support cost effective production.
  • •Provide quality engineering support to operations ensuring consistent application of quality techniques.
  • •Resolve quality issues of capability, tolerancing, and materials related issues.
  • •Resolve quality issues by identifying problems, examining solution options, implementing action plans, and providing resources.
  • •Effectively communicate and reinforce Great Dane’s commitment to quality improvement efforts.
  • •Coordinate pre-launch production trial run process monitoring.
  • •Perform duties in accordance with quality system

About great dane

With a history dating back to 1900, Great Dane has established itself as a transportation solutions leader of today – delivering innovative products and exceptional services that help our customers and employees succeed. We not only engineer durable and high-quality trailers and truck bodies; we foster relationships that last a lifetime.

WHY WORK FOR US?

Great Dane is a leading manufacturer of dry-freight vans, refrigerated trailers, and flatbeds with 1

More Quality roles nearby