Engineer, Tooling-CNC Programming
GKN Aerospace · Garden Grove, CA
- Level
- Level: Engineer
- Team
- Team: Manufacturing
- Industry
- Industry: Aerospace & defense
- Posted
- Posted: 5 days ago
The role in 30 seconds
An engineer-level manufacturing role at GKN Aerospace (aerospace & defense) in Garden Grove, CA. Plan, create, verify, revise, and optimize machine-control data for multi-axis equipment used to manufacture and inspect complex aerospace parts, tools, and fixtures.
- Tools it names
- Lean, Root cause, GD&T, CNC, Machining, Tooling
Read from the posting. The full description is below.
From the plant jobs report · week of November 16, 2026
Manufacturing Engineer roles in California: typical posted base $115k–$173k.
Median of the low and high ends of 195 live postings that list pay, out of 492 manufacturing engineer openings in California, read from manufacturers' own careers sites.
California plant jobs report →Pay by team and state →What moves pay →
How this role compares
Against 491 other live manufacturing postings in California.
- Base pay
- Not listed in this posting
- Experience asked
- Not stated
Typical $110k–$165k, from 173 postings that list pay.
Similar roles usually ask 5+ years.
Skills these teams ask for most
- ✓ Tooling 50%
- New product launch 43%
- ✓ Root cause 38%
- Automation 33%
- ✓ Lean 28%
- Validation (IQ/OQ/PQ) 27%
✓ = this posting asks for it too. % = share of similar postings that mention it.
Stands out: this posting asks for CNC, which few similar roles mention. If you have it, lead with it.
At a glance
Pulled from the posting text. If it's not listed here, the posting didn't say.
How to get in at this plant
Five moves over a week or two. The first one takes ten minutes.
- 1
Pick 2–3 people on the Manufacturing team at GKN Aerospace
We found 6 people at this company and state: 4 in this kind of role, 2 leaders. Engineers who joined in the last year or two reply the most. See them ↓
- 2
Send a short, curious note
One real question about their work. No favors yet. Each person gets a different note, written for this role.
Write to Christopher → (free) - 3
Turn a reply into a short call
Questions worth asking about this team:
- What does a normal week look like on your team?
- Is the work mostly new product launches or sustaining existing lines?
- How much time do you spend on the floor versus at a desk?
- How did you land the job? What stood out in your interviews?
- 4
Apply with someone vouching for you
If the call went well, ask whether they’d pass your résumé to the hiring manager. Send your résumé link, apply that day, and let them know.
- 5
Bring proof to the interview
One page of before-and-after numbers from projects you led: scrap, OEE, cycle time, cost. Plant managers hire on results.
This plant: GKN Aerospace in Garden Grove
4 other open roles at this site · 6 people we found in manufacturing roles at GKN Aerospace.
- Manufacturing Engineer 1st Shift (Temp Contract) · Manufacturing
- Manufacturing Engineer - 2nd Shift (Temp Contract) · Manufacturing
- Manufacturing Engineer - 3rd Shift (Temp Contract) · Manufacturing
- Production Supervisor · Production · Supervisor
Full description from GKN AerospaceAs posted on their careers site.ShowHide
Job Summary
Create, verify, release, and continuously improve controlled CNC programs that safely and repeatedly produce conforming aerospace components, tools, and fixtures at the Garden Grove facility.
Provide hands-on programming expertise across the Fadal, Heian, Onsrud, Thermwood, and Zimmerman machine fleet, using disciplined simulation, prove-out, documentation, and revision-control practices.
Partner with Manufacturing Engineering, Operations, Quality, Tooling, Maintenance, and approved external specialists to improve machining capability while maintaining clear technical-authority and escalation boundaries.
Job
Responsibilities
1. Safety, Compliance and Technical Control
- ◆Apply a safety-first approach to CNC programming, simulation, prove-out, program changes, and shop-floor support; stop and escalate work when conditions could compromise people, equipment, product, tooling, or the environment.
- ◆Follow approved program naming, access, review, release, archive, backup, emergency-change, and revision-control requirements; verify that the shop-floor program matches the approved revision before production use.
- ◆Protect export-controlled, proprietary, customer, and company information and follow all applicable site security, quality, environmental, health, and safety requirements.
- ◆Perform work within assigned authority and escalate proprietary-control, machine-parameter, safety, quality, process-approval, or technical-authority decisions to the appropriate owner.
2. CNC Programming, Simulation and Documentation
- ◆Plan, create, verify, revise, and optimize machine-control data for multi-axis equipment used to manufacture and inspect complex aerospace parts, tools, and fixtures.
- ◆Develop safe and efficient toolpaths using approved CAM methods; complete machine simulation, collision and clearance checks, post-processed code review, and required peer or technical review before release.
- ◆Create and maintain complete shop-floor documentation, including setup sheets, tool lists, workholding and work-offset information, probing routines, operator notes, and revision history.
- ◆Select or recommend machining strategies, cutting tools, feeds, speeds, workholding, and probing approaches consistent with approved process
requirements
and machine capability.
3. Prove-Out, Production Support and Problem Solving
- ✓Participate in controlled machine prove-outs, first-piece activities, and production introduction; document results, required changes, residual risks, and release evidence.
- ✓Diagnose CNC program, post-processor, probing, simulation, setup-documentation, and revision issues using drawings, models, machine evidence, inspection results, and structured problem-solving methods.
- ✓Provide structured support across assigned machines and shifts; communicate status, containment, risk, recovery needs, and escalation clearly through the machining operating cadence.
- ✓Lead or support root-cause analysis for recurring programming-related losses and implement verified corrective actions within authorized scope.
(Cont...)
4. Quality, Qualification and Configuration Management
- ✓Partner with Quality and Manufacturing Engineering on producibility, measurement strategy, first article inspection, process qualification, and acceptance of new or revised programs.
- ✓Ensure CNC programs and associated records support applicable drawing, GD&T, traceability, configuration, customer, and aerospace quality requirements.
- ✓Support containment and correction of programming-related nonconformances without bypassing independent Quality authority or required approval processes.
- ✓Preserve objective evidence needed to demonstrate program verification, prove-out completion, qualification, revision status, and production readiness.
5. Continuous Improvement and Standardization
- ✓Improve first-pass quality, repeatability, cycle time, tool life, setup effectiveness, and machine utilization while following required change-control and process-approval practices.
- ✓Develop and maintain reusable programming templates, machining methods, post-processor knowledge, tool libraries, checklists, and lessons learned.
- ✓Use data and practical Lean methods to identify recurring losses, reduce variation and waste, and sustain verified improvements in standard work.
- ✓Maintain visibility of the assigned programming backlog and communicate priorities, technical risk, dependencies, completion evidence, and needed escalation.
6. Machine Industrialization and Knowledge Transfer
- ✓Support Zimmerman and future machine industrialization, including post-processor readiness, program development, simulation, prove-out, tooling interfaces, probing, qualification evidence, operator support, and production handoff.
- ✓Coordinate with equipment OEMs and approved external specialists while ensuring that decisions, methods, files, and lessons learned are documented and transferred to designated internal owners.
- ✓Coach programmers, engineers, leads, and qualified operators on approved programming practices, safe program use, troubleshooting boundaries, and escalation requirements.
- ✓Collaborate effectively across Operations, Manufacturing Engineering, Quality, Tooling, Maintenance, Planning, EH&S, and external technical part
Show full description ↓Show less ↑
Fantastic challenges. Amazing opportunities.
GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, we’re inspired by the opportunities to innovate and break boundaries. We’re proud to play a part in protecting the world’s democracies. And we’re committed to putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees across 32 manufacturing sites in 12 countries we serve over 90% of the world’s aircraft and engine manufacturers and achieved sales of £3.6bn in 2025. There are no limits to where you can take your career.
More Manufacturing roles nearby
- Manufacturing Engineer 1st Shift (Temp Contract) · GKN Aerospace · Garden Grove
- Manufacturing Engineer - 2nd Shift (Temp Contract) · GKN Aerospace · Garden Grove
- Manufacturing Engineer - 3rd Shift (Temp Contract) · GKN Aerospace · Garden Grove
- Senior Advanced Manufacturing Engineer, Battery · Harbinger Motors · Garden Grove
