Process Engineer – Flat Rolled Products
Elmet Euclid LLC · Euclid, OH
- Level
- Level: Engineer
- Team
- Team: Process
- Base pay
- Base pay: $90k–$115k
- Degree
- Degree: Required
- Experience asked
- Experience asked: 5+ years
- Industry
- Industry: Industrial
- Posted
- Posted: 18 days ago
The role in 30 seconds
An engineer-level process role at Elmet Euclid LLC (industrial) in Euclid, OH. Develop, document, and oversee manufacturing processes for flat-rolled molybdenum, tungsten, and toll-processing products.
- They ask for
- 5+ years · degree required
- Tools it names
- Lean, Six Sigma, SPC, FMEA, Tooling
- Base pay
- $90k–$115k
- Day to day
- some off-shift / weekend coverage
Read from the posting. The full description is below.
From the plant jobs report · week of November 16, 2026
Process Engineer roles in Ohio: typical posted base $90k–$121k. This one lists $90k–$115k.
Median of the low and high ends of 8 live postings that list pay, out of 45 process engineer openings in Ohio, read from manufacturers' own careers sites.
Ohio plant jobs report →Pay by team and state →What moves pay →
How this role compares
Against 44 other live process postings in Ohio.
- Base pay
- In line with similar roles
- Experience asked
- Typical (5+ years)
Typical $82k–$121k, from 7 postings that list pay.
Similar roles usually ask 5+ years.
Skills these teams ask for most
- ✓ Lean 53%
- Root cause 42%
- ✓ Six Sigma 38%
- Team leadership 31%
- ✓ Tooling 27%
- ✓ FMEA 24%
✓ = this posting asks for it too. % = share of similar postings that mention it.
At a glance
Pulled from the posting text. If it's not listed here, the posting didn't say.
How to get in at this plant
Five moves over a week or two. The first one takes ten minutes.
- 1
Pick 2–3 people on the Process team at Elmet Euclid LLC
Engineers who joined in the last year or two reply the most. Use the team search on this page to find them.
- 2
Send a short, curious note
One real question about their work. No favors yet. Each person gets a different note, written for this role.
- 3
Turn a reply into a short call
Questions worth asking about this team:
- What does a normal week look like on your team?
- Is the work mostly new product launches or sustaining existing lines?
- How much time do you spend on the floor versus at a desk?
- How does off-shift and weekend coverage work?
- How did you land the job? What stood out in your interviews?
- 4
Apply with someone vouching for you
If the call went well, ask whether they’d pass your résumé to the hiring manager. Send your résumé link, apply that day, and let them know.
- 5
Bring proof to the interview
One page of before-and-after numbers from projects you led: scrap, OEE, cycle time, cost. Plant managers hire on results.
This plant: Elmet Euclid LLC in Euclid
1 other open role at this site.
- Production Supervisor - 3rd Shift · Production · Supervisor
Full description from Elmet Euclid LLCAs posted on their careers site.ShowHide
requirements
- ✓Help troubleshoot existing customer materials and applications
- ✓Partner with Quality Control and Quality Assurance to investigate nonconforming material
- ✓Support the resolution of customer complaints
- ✓Develop and implement corrective and preventive actions
- ✓Perform FMEA and other analyses in support of quality and process-improvement initiatives
- ✓Ensure manufacturing processes support both customer
requirements
and appropriate product costing
Requirements
You Could Be a Great Fit!
This role requires an engineering foundation combined with relevant manufacturing experience. You could be a strong fit if you have:
- ✓A Bachelor’s degree in Materials Science, Mechanical Engineering, Manufacturing Engineering, or a related discipline
- ✓3–5 years of experience in metal forming processes preferred
- ✓Experience developing, documenting, or improving manufacturing processes
- ✓Proficiency with Microsoft Office
- ✓Strong analytical and structured problem-solving skills
- ✓The ability to communicate technical information clearly, both verbally and in writing
- ✓The ability to work independently while collaborating closely with Manufacturing and Quality
- ✓A willingness to spend time on the manufacturing floor understanding processes and solving problems at the source
- ✓A results-oriented approach and the initiative to move improvements forward
Additional Tools in Your Toolbox
Experience in any of these areas can help you hit the ground running
- ✓Flat rolling
- ✓Refractory metals
- ✓Molybdenum or tungsten processing
- ✓Thin-gauge sheet or foil manufacturing
- ✓Hot working of metals
- ✓Statistical Process Control (SPC)
- ✓Lean Manufacturing
- ✓Six Sigma
- ✓FMEA
- ✓Corrective and preventive action
- ✓Process capability analysis
- ✓Material yield improvement
- ✓New equipment or tooling implementation
- ✓New product introduction
Experience with SPC, Lean Manufacturing, Six Sigma, and hot working of metal products is preferred rather than required.
What Success Looks Like
Successful Process Engineers make manufacturing processes easier to understand, control, and improve. You’ll know you’re succeeding when:
- ✓Manufacturing documentation accurately reflects what happens on the production floor
- ✓SOPs, BOMs, routings, and work instructions are accurate and usable
- ✓Manufacturing processes consistently meet customer
requirements
- ✓Process capability and material yields improve
- ✓Production problems are investigated and resolved instead of repeatedly worked around
- ✓Quality issues and nonconforming material are addressed systematically
- ✓Corrective actions address underlying causes
- ✓New equipment, tooling, and processes transition successfully into production
- ✓New products can be manufactured consistently and efficiently
- ✓Manufacturing and Quality see Engineering as a practical partner in solving problems
- ✓Customers receive knowledgeable technical support when process or material questions arise
Engineering That Happens on the Manufacturing Floor
This isn’t a role where process engineering happens entirely behind a computer. When a process isn’t performing as expected, you’ll work directly with the people running it. You’ll review the data, understand what is happening to the material, identify potential causes, and determine what needs to change.
That could mean mod
Show full description ↓Show less ↑
Description
Process Engineer – Flat Rolled Products
Euclid, Ohio | $90,000–$115,000/year | Full-Time | Onsite
Improve the Process Behind High-Performance Metals.
Producing thin-gauge refractory metal sheet and foil requires precise control of materials, equipment, and manufacturing processes.
Elmet Technologies is hiring a Process Engineer – Flat Rolled Products for our Euclid, Ohio facility to develop, oversee, and improve the manufacturing processes used to produce flat-rolled molybdenum, tungsten, and toll-processed products.
This is a hands-on engineering role where you’ll work directly with Manufacturing and Quality to solve production problems, improve process capability and material yield, develop new products and processes, and ensure our manufacturing methods consistently meet demanding customer requirements.
If you’re an engineer who likes being close to manufacturing and seeing the results of your work on the production floor, this is an opportunity to make a measurable impact.
What’s In It for You
- •$90,000–$115,000 annual salary
- •Benefits starting Day One
- •Three medical plan options
- •Dental and vision coverage
- •Company-paid life insurance
- •Company-paid short-term and long-term disability
- •4% company match on retirement savings
- •Paid time off
- •Paid company holidays
- •Tuition assistance
- •Professional development opportunities
- •Internal career growth
What You’ll Do
As a Process Engineer, you’ll take responsibility for developing, documenting, controlling, and improving manufacturing processes associated with thin-gauge refractory metal sheet and foil. You’ll:
- •Develop, document, and oversee manufacturing processes for flat-rolled molybdenum, tungsten, and toll-processing products
- •Develop and maintain OPCs, BOMs, routings, and detailed manufacturing instructions
- •Make sure documented processes accurately reflect actual production practices
- •Partner with Manufacturing and Quality to ensure quality, safety, and workmanship standards are met or exceeded
- •Analyze manufacturing processes to identify opportunities to improve capability, consistency, and material yield
- •Develop and implement new manufacturing processes and methods
- •Evaluate and introduce new equipment and tooling
- •Support the development and introduction of new products
- •Work directly with employees on the manufacturing floor to troubleshoot and resolve process problems
- •Provide technical support to customers to define product and process
