Automation & Controls Engineer I / Monday through Friday 6:00pm - 3:00am / $67,000-$80,000 plus 15% differential
Revision Military · Essex Junction, VT
- Level
- Level: Engineer
- Team
- Team: Controls
- Degree
- Degree: Required
- Experience asked
- Experience asked: 4+ years
- Industry
- Industry: Industrial
- Posted
- Posted: Recently
The role in 30 seconds
An engineer-level controls role at Revision Military (industrial) in Essex Junction, VT.
- They ask for
- 4+ years · degree required
- Tools it names
- Root cause, PLC, Robotics, Automation, CNC, Injection molding
Read from the posting. The full description is below.
From the plant jobs report · week of November 16, 2026
Controls Engineer roles in the US: typical posted base $97k–$140k.
Median of the low and high ends of 363 live postings that list pay, out of 1089 controls engineer openings in the US, read from manufacturers' own careers sites.
Vermont plant jobs report →Pay by team and state →What moves pay →
How this role compares
Against 1088 other live controls postings in the US.
- Base pay
- Not listed in this posting
- Experience asked
- Less than usual (4+ vs 5+)
Typical $97k–$140k, from 356 postings that list pay.
Similar roles usually ask 5+ years.
Skills these teams ask for most
- ✓ Automation 73%
- ✓ PLC 68%
- ✓ Robotics 41%
- ✓ Root cause 23%
- Validation (IQ/OQ/PQ) 23%
✓ = this posting asks for it too. % = share of similar postings that mention it.
Stands out: this posting asks for CNC, Injection molding, Painting / coating, which few similar roles mention. If you have it, lead with it.
At a glance
Pulled from the posting text. If it's not listed here, the posting didn't say.
How to get in at this plant
Five moves over a week or two. The first one takes ten minutes.
- 1
Pick 2–3 people on the Controls team at Revision Military
Engineers who joined in the last year or two reply the most. Use the team search on this page to find them.
- 2
Send a short, curious note
One real question about their work. No favors yet. Each person gets a different note, written for this role.
- 3
Turn a reply into a short call
Questions worth asking about this team:
- What does a normal week look like on your team?
- How did you land the job? What stood out in your interviews?
- 4
Apply with someone vouching for you
If the call went well, ask whether they’d pass your résumé to the hiring manager. Send your résumé link, apply that day, and let them know.
- 5
Bring proof to the interview
One page of before-and-after numbers from projects you led: scrap, OEE, cycle time, cost. Plant managers hire on results.
Full description from Revision MilitaryAs posted on their careers site.ShowHide
Responsibilities
- ◆Provide electrical and mechanical technical support for production and support equipment, focusing on safety, operational efficiency, machine performance, and process improvement.
- ◆Collaborate with Engineering and Maintenance to troubleshoot equipment and processes; implement repairs, upgrades, modifications, and installations as needed.
- ◆Identify root causes of equipment malfunctions and implement corrective actions to improve reliability and safety.
- ◆Maintain accurate records of equipment malfunctions, anomalies, root causes, corrective actions, and process improvements.
- ◆Develop and improve operating procedures, work instructions, and diagnostic manuals to ensure safe system and process operation.
- ◆Coordinate with suppliers, contractors, and Procurement to source parts, documentation, and services, and manage assigned portions of projects of varying scope.
- ◆Perform other duties as assigned.
Requirements
- ✓Bachelor’s or Associates degree in Electrical Engineering or Electro-mechanical Engineering or the equivalent combination of 2-4 years of education and 0-2 years of hands on experience.
- ✓Experience with NEC and NFPA Electrical Codes.
- ✓Experience in an IEC 61131-3 programming Environment (Codesys).
- ✓Experience with Industrial communication buses i.e. AS-I Bus, Interbus, and Ethernet.
- ✓Experience with programmable logic control (PLC), human-machine interface (HMI) and supervisory control and data acquisition (SCADA) software, pc-based control, distributed control systems (DCS), CNC, motion control, robotics, machine control, vision systems, motor drives, and manufacturing execution systems (MES).
- ✓Experience maintaining, programming robotic automation and motion control, including multi-axis robots and system integration.
- ✓Knowledge of these component types:
- ✓Basic sensors: Pressure transmitters, flow transmitters, Limit Switches, Proximity switches, Optical sensors, Bar code Systems, Current and Voltage Isolators.
- ✓AC and DC Motors; understand Motor Torque, HP and how to control speeds.
- ✓Must have experience in AC and DC Drives, understand PID loops.
- ✓Understanding of electrical and mechanical prints, schematics, manuals, for various types of manufacturing equipment systems. Electrical and mechanical system and component level trouble shooting skills required.
- ✓Experience in Allen-Bradley PLC controls programming languages such as, SFC, Function Blocks, Structured Text and Rockwell Ladder logic, networks and Profibus.
- ✓Ability to manage pressure within a fast-paced work environment, flexibility to support critical production schedules.
- ✓Support Mechanical, Process, and Maintenance engineering projects as needed.
- ✓Competent using basic MS Office applications (MS Excel, MS Project, Word, PowerPoint, etc.).
- ✓Must have effective verbal and written communication skills.
- ✓U.S. Government authorization required.
Work environment ( include physical
requirements
)
- ✓Mixed office and production floor work environment
- ✓May have to lift and move up to 50 pounds.
Show full description ↓Show less ↑
Primary employment objectives
The Automation & Controls Engineer I maintains, troubleshoots, and improves automated manufacturing systems, including injection molding, lens coating, inspection, etching, milling, material handling, and robotics. This role is critical to the safe, reliable operation of equipment supporting the manufacture of military-grade protective eyewear.
More Controls roles nearby
- Automation & Controls Engineer (On-Site) · Rhino Foods Inc · Burlington · 6 mi
- Stability and Controls Engineer, Flight Sciences · BETA Technologies · Plattsburgh · 22 mi
- Automation Control Technician - 4th Shift · Hubbell · Lincoln · 77 mi
- Automation Control Technician 5th Shift - Lincoln, NH · Hubbell · Lincoln · 77 mi
