ShopFloorJobs
BD

Sr. Staff Manufacturing Engineer - Atlas

Boston Dynamics · Waltham, MA

Level
Level: Senior
Team
Team: Manufacturing
Base pay
Base pay: $135k–$175k
Degree
Degree: Preferred
Experience asked
Experience asked: 15+ years
Industry
Industry: Industrial
Posted
Posted: 26 days ago

The role in 30 seconds

A senior manufacturing role at Boston Dynamics (industrial) in Waltham, MA. Design, fabricate, and validate custom fixtures, tools, and jigs to support mechanical assembly, precision alignment, and testing of electric motors and actuators, ensuring ergonomic and repeatable processes.

They ask for
15+ years · degree preferred
Tools it names
Lean, Six Sigma, Value stream mapping, Root cause, GD&T, Validation (IQ/OQ/PQ)
Base pay
$135k–$175k

Read from the posting. The full description is below.

From the plant jobs report · week of November 16, 2026

Manufacturing Engineer roles in Massachusetts: typical posted base $100k–$147k. This one lists $135k–$175k.

Median of the low and high ends of 59 live postings that list pay, out of 109 manufacturing engineer openings in Massachusetts, read from manufacturers' own careers sites.

Massachusetts plant jobs report →Pay by team and state →What moves pay →

How this role compares

Against 108 other live manufacturing postings in Massachusetts.

Base pay
About 35% above similar roles

Typical $93k–$137k, from 47 postings that list pay.

Experience asked
More than usual (15+ vs 6+)

Similar roles usually ask 6+ years.

Skills these teams ask for most

  • ✓ Tooling 52%
  • ✓ Lean 50%
  • ✓ Automation 45%
  • ✓ Six Sigma 36%
  • ✓ Root cause 36%
  • ✓ Validation (IQ/OQ/PQ) 35%

✓ = this posting asks for it too. % = share of similar postings that mention it.

Stands out: this posting asks for Value stream mapping, GD&T, CATIA / NX, which few similar roles mention. If you have it, lead with it.

It asks for 15+ years. If you're close, apply anyway: requirements are a wish list. Talk to someone doing this work there first.

At a glance

Pulled from the posting text. If it's not listed here, the posting didn't say.

How to get in at this plant

Five moves over a week or two. The first one takes ten minutes.

  1. 1

    Pick 2–3 people on the Manufacturing team at Boston Dynamics

    Engineers who joined in the last year or two reply the most. Use the team search on this page to find them.

  2. 2

    Send a short, curious note

    One real question about their work. No favors yet. Each person gets a different note, written for this role.

  3. 3

    Turn a reply into a short call

    Questions worth asking about this team:

    • What does a normal week look like on your team?
    • Is the work mostly new product launches or sustaining existing lines?
    • How much time do you spend on the floor versus at a desk?
    • How did you land the job? What stood out in your interviews?
  4. 4

    Apply with someone vouching for you

    If the call went well, ask whether they’d pass your résumé to the hiring manager. Send your résumé link, apply that day, and let them know.

  5. 5

    Bring proof to the interview

    One page of before-and-after numbers from projects you led: scrap, OEE, cycle time, cost. Plant managers hire on results.

Full description from Boston DynamicsAs posted on their careers site.Show

About The Role

As a Sr. Staff Manufacturing Engineer , you will play a critical role in the optimization and scale-up of low-volume production processes , assembly workflows, and custom tooling to support the assembly, test, and integration of our next-generation humanoid robot. You will work closely with Hardware Engineering, Prototype Operations, Systems Engineering, Behavior and Software teams to ensure that cutting-edge designs can be efficiently and reliably built in a prototype and low-volume production environment.

This role requires expert-level technical expertise in cradle-to-grave process implementation, large production system/value-stream design, and an innovative spirit to bridge the gap between product design and manufacturing execution. You will oversee automation equipment, fixture, tool, and jig design and implementation to ensure process repeatability and product quality for Atlas builds. This role will also interface with our parent company, Hyundai Motor Group (HMG), leveraging their deep manufacturing expertise in the automotive sector.

Responsibilities

  • ◆Develop, optimize, and implement rate production processes and assembly workflows for Atlas, from prototype through low-volume production with a focus on scaling for future production needs.
  • ◆Design and implement production system tools including material flow diagrams, value stream maps, floor layouts, and automation integrations.
  • ◆Collaborate with Hardware Engineering to provide DFM/DFA (Design for Manufacturing & Assembly) input throughout product development, ensuring manufacturability and serviceability.
  • ◆Design, fabricate, and validate custom fixtures, tools, and jigs to support mechanical assembly, precision alignment, and testing of electric motors and actuators, ensuring ergonomic and repeatable processes.
  • ◆Define assembly sequences, work instructions, and process documentation, including standard operating procedures (SOPs), visual aids, and training materials for assembly technicians.
  • ◆Support prototype builds in a hands-on capacity, troubleshooting assembly issues, identifying root causes, and driving corrective actions to improve processes and product designs.
  • ◆Implement process controls to ensure build quality, dimensional accuracy, and alignment with product performance requirements.
  • ◆Develop and implement inspection and test processes, including first article inspections (FAI), in-process quality checks, and final acceptance criteria.
  • ◆Collaborate with Supply Chain to ensure external fabrication and supplier processes align with internal manufacturing

requirements

and quality standards.

  • ✓Lead continuous improvement initiatives, applying Lean Manufacturing and Six Sigma methodologies to improve process efficiency, reduce cycle times, and increase yield.
  • ✓Drive tooling and equipment validation, ensuring custom fixtures and tools are fully qualified for use in production, including performing capability studies where necessary.

Qualifications

  • ✓Bachelor's degree in Manufacturing, Mechanical, Industrial, Electrical Engineering, or a related field; Master’s degree or PhD a plus.
  • ✓At least 8-15 years of relevant experience in Process engineering, process development, or advanced manufacturing, preferably in robotics, aerospace, or complex electromechanical systems.
  • ✓Expert-level proficiency in CAD software (SolidWorks, CATIA, or similar) for tool/fixture design and review of engineering drawings.
  • ✓Proven track record of DFM/DFA collaboration with design teams to drive manufacturable and serviceable product designs.
  • ✓Hands-on experience developing and validating custom tooling, jigs, and fixtures to support precision mechanical assembly.
  • ✓Experience developing and validating custom automation equipment to support precision mechanical assembly and improve process efficiency.
  • ✓Experience writing clear, concise, and detailed work instructions, SOPs, and training materials for assembly technicians.
  • ✓Familiarity with precision assembly techniques, including alignment, shimming, fastening, sealing, and torque control for complex assemblies.
  • ✓Experience working in prototype, low-volume, or high-mix production environments, with an ability to adapt processes for evolving product designs.
  • ✓Strong understanding of GD&T (Geometric Dimensioning & Tolerancing) and its application in both design and inspection processes.
  • ✓Demonstrated experience applying Lean Manufacturing, Six Sigma, and root cause analysis methodologies to drive process improvement.
  • ✓Excellent problem-solving skills with the ability to troubleshoot complex mechanical and electromechanical assemblies.
  • ✓Comfortable working in cross-functional teams, balancing technical, schedule, and cost considerations in a fast-paced environment.
  • ✓Strong communication skills, with the ability to present technical concepts and influence stakeholders across engineering, operations, and leadership teams.
  • ✓Experience supporting on-site prototype builds and providing direct manufacturing floor support.
  • ✓Hands-on experience with additive manufacturing, rapid prototyping, machining (e.g. Mill, Lathe) and fabrication (e.g. Welding, Grinding, Bending) techni
Show full description ↓

About Boston Dynamics

Boston Dynamics is a global leader in robotics innovation, renowned for developing highly advanced, dynamic robots that excel in mobility, dexterity, and intelligence. Our cutting-edge robots, including the iconic Atlas , Spot , and Stretch , are pushing the boundaries of automation and redefining how machines interact with the world. At Boston Dynamics, we blend advanced mechanical design, state-of-the-art control systems, and AI-driven perception to create robots capable of performing in unstructured, real-world environments.

We are looking for an expert Sr. Staff Manufacturing Engineer to support the Atlas program, helping to transform groundbreaking research prototypes into reliable, scalable systems for manufacturing and field deployment.

More Manufacturing roles nearby