Process Engineer - Injection Molding
Franklin Electric · Oklahoma City, OK
- Level
- Engineer
- Team
- Process
- Degree
- Preferred
- Experience asked
- 5+ years
- Industry
- Industrial
- Posted
- Recently
The role in 30 seconds
An engineer-level process role at Franklin Electric (industrial) in Oklahoma City, OK. Develop, establish, document, and optimize injection molding processes for new and existing products.
- They ask for
- 5+ years · degree preferred
- Tools it names
- Lean, Six Sigma, Kaizen, OEE, Root cause, SPC
Read from the posting. The full description is below.
From the plant jobs report · week of November 2, 2026
Process Engineer roles in the US: typical posted base $95k–$134k.
Median of the low and high ends of 343 live postings that list pay, out of 923 process engineer openings in the US, read from manufacturers' own careers sites.
Oklahoma plant jobs report →Pay by team and state →What moves pay →
How this role compares
Against 922 other live process postings in the US.
- Base pay
- Not listed in this posting
- Experience asked
- Typical (5+ years)
Typical $95k–$134k, from 340 postings that list pay.
Similar roles usually ask 5+ years.
Skills these teams ask for most
- ✓ Root cause 45%
- ✓ Lean 31%
- ✓ Six Sigma 26%
- ✓ SPC 25%
- ✓ New product launch 21%
- ✓ Validation (IQ/OQ/PQ) 20%
✓ = this posting asks for it too. % = share of similar postings that mention it.
Stands out: this posting asks for Kaizen, OEE, GD&T, Robotics, which few similar roles mention. If you have it, lead with it.
At a glance
Pulled from the posting text. If it's not listed here, the posting didn't say.
How to get in at this plant
Five moves over a week or two. The first one takes ten minutes.
- 1
Pick 2–3 people on the Process team at Franklin Electric
Engineers who joined in the last year or two reply the most. Use the team search on this page to find them.
- 2
Send a short, curious note
One real question about their work. No favors yet. Each person gets a different note, written for this role.
- 3
Turn a reply into a short call
Questions worth asking about this team:
- What does a normal week look like on your team?
- Is the work mostly new product launches or sustaining existing lines?
- How much time do you spend on the floor versus at a desk?
- How did you land the job? What stood out in your interviews?
- 4
Apply with someone vouching for you
If the call went well, ask whether they’d pass your résumé to the hiring manager. Send your résumé link, apply that day, and let them know.
- 5
Bring proof to the interview
One page of before-and-after numbers from projects you led: scrap, OEE, cycle time, cost. Plant managers hire on results.
Full description from Franklin ElectricAs posted on their careers site.ShowHide
What You Need
- ✓Thorough understanding of plastic injection molding processes and molding parameters.
- ✓Strong knowledge of resin characteristics including commodity and engineered thermoplastics.
- ✓Ability to troubleshoot complex molding defects and identify root causes.
- ✓Knowledge of mold design, tooling, hot runner systems, cooling systems, and auxiliary equipment.
- ✓Familiarity with robotic automation, conveyors, dryers, chillers, thermolators, and material handling systems.
- ✓Ability to interpret engineering drawings, GD&T, specifications, and quality requirements.
- ✓Strong analytical and problem-solving skills.
- ✓Experience with SPC, process capability studies, and statistical analysis.
- ✓Knowledge of Lean Manufacturing, Six Sigma, and continuous improvement methodologies.
- ✓Proficient in Microsoft Office applications.
- ✓Experience with ERP/MRP systems preferred.
- ✓Excellent written and verbal communication skills.
- ✓Strong organizational and time management abilities.
- ✓Ability to prioritize multiple projects while meeting production deadlines.
- ✓Ability to work independently and as part of a cross-functional team.
Education and Experience
- ✓Bachelor's degree in Plastics Engineering, Mechanical Engineering, Manufacturing Engineering, Industrial Engineering, or related technical field preferred.
- ✓Equivalent combination of education and extensive injection molding experience may be considered.
- ✓Minimum 3–5 years of experience in plastics injection molding processing or manufacturing engineering preferred.
- ✓Experience with scientific molding principles strongly preferred.
- ✓Experience supporting high-volume manufacturing environments.
- ✓Experience with process validation and new product launches is preferred
Show full description ↓Show less ↑
Process Engineer - Injection Molding
Department: Manufacturing / Operations / Quality
Employment Type: Full Time
Location: US - Oklahoma - Oklahoma City 2
Reporting To: Jeff Ward
Description
Embark on a career journey with Franklin Electric, where your passion meets purpose, and every day is an opportunity to make a difference in our global communities by providing access to water, fuel, and electricity.
The Process Engineer is responsible for developing, optimizing, and maintaining injection molding processes to ensure the production of high-quality plastic components in a safe, efficient, and cost-effective manner. This position works closely with Production, Tooling, Maintenance, Engineering, Quality, and Continuous Improvement teams to improve productivity, reduce scrap, minimize downtime, and support new product launches.
Franklin Electric is a diverse team of innovators making a positive global impact since 1944. We offer innovative water solutions, ensuring access, treatment, and efficient management of this vital resource. Our commitment to excellence is reflected in our innovative products, industry-leading quality, exceptional customer service, employee development, and passion for social responsibility. Join us to create a better future while growing professionally in a supportive environment.
Move Forward With Us
Who We Want
- •Develop, establish, document, and optimize injection molding processes for new and existing products.
- •Set up and validate molding parameters including fill, pack, hold, cooling, injection speed, screw recovery, clamp force, and melt temperatures.
- •Troubleshoot molding defects such as flash, short shots, sink marks, burns, splay, warpage, bubbles, and dimensional issues.
- •Analyze process performance and implement corrective actions to improve quality and cycle times.
- •Lead scientific molding and process validation activities including IQ, OQ, and PQ as required.
- •Establish standard process documentation, setup sheets, work instructions, and process control limits.
- •Support mold trials, first article inspections, engineering changes, and new product introductions.
- •Collaborate with Tooling and Maintenance to identify mold repairs, preventive maintenance needs, and equipment improvements.
- •Evaluate and recommend process improvements that increase productivity, reduce waste, and lower manufacturing costs.
- •Monitor key performance indicators including cycle time, scrap, downtime, Overall Equipment Effectiveness (OEE), and machine utilization.
- •Perform root cause analysis using structured problem-solving methods such as 5 Why, Fishbone, Pareto Analysis, and Corrective Action.
- •Assist in equipment selection, installation, and commissioning of new molding machines and auxiliary equipment.
- •Train production personnel, mold technicians, and process technicians on established processing standards and best practices.
- •Ensure compliance with customer specifications, quality standards, and engineering requirements.
- •Participate in Lean Manufacturing, Six Sigma, Kaizen, and continuous improvement initiatives.
- •Support production during startup, changeovers, and troubleshooting activities.
- •Work with Quality Engineering to resolve customer complaints and internal quality concerns.
- •Maintain accurate engineering records, process documentation, and validation reports.
- •Ensure compliance with company safety policies and OSHA regulations.
- •Perform other duties as assigned.
Who We Want
- •Collaborative partners. People who build cross-functional relationships to develop best practices and innovative solutions.
- •Dedicated achievers. People who thrive in a fast-paced environment and will stop at nothing to ensure a project is completed and meets regulations and expectations.
Computer Skills
Intermediate: CAD software, alphanumeric data entry, spreadsheet.
Basic: Word processing/typing.
Certificates and Licenses
- •None.
While performing the functions of this job, the employee is
Continually required to stand or walk; use hands to finger, handle, or feel; and talk or hear.
Regularly required to reach with hands and arms.
Occ