1st Shift - Industrial Maintenance Technician - Reno, NV
Nordic Cold Chain Solutions · Reno, NV
- Level
- Level: Technician
- Team
- Team: Reliability
- Industry
- Industry: Industrial
- Posted
- Posted: 23 days ago
The role in 30 seconds
A technician-level reliability role at Nordic Cold Chain Solutions (industrial) in Reno, NV. Support 480V equipment only within demonstrated qualification and company authorization.
- Tools it names
- Root cause, PLC
Read from the posting. The full description is below.
From the plant jobs report · week of November 16, 2026
Maintenance Technician roles in the US: typical posted base $58k–$83k.
Median of the low and high ends of 87 live postings that list pay, out of 3506 maintenance technician openings in the US, read from manufacturers' own careers sites.
Nevada plant jobs report →Pay by team and state →What moves pay →
How this role compares
Against 31 other live reliability postings in Nevada.
- Experience asked
- Not stated
Similar roles usually ask 5+ years.
Skills these teams ask for most
- Team leadership 47%
- ✓ PLC 28%
- ✓ Root cause 22%
- Automation 22%
✓ = this posting asks for it too. % = share of similar postings that mention it.
At a glance
Pulled from the posting text. If it's not listed here, the posting didn't say.
How to get in at this plant
Five moves over a week or two. The first one takes ten minutes.
- 1
Pick 2–3 people on the Reliability team at Nordic Cold Chain Solutions
Engineers who joined in the last year or two reply the most. Use the team search on this page to find them.
- 2
Send a short, curious note
One real question about their work. No favors yet. Each person gets a different note, written for this role.
- 3
Turn a reply into a short call
Questions worth asking about this team:
- What does a normal week look like on your team?
- How did you land the job? What stood out in your interviews?
- 4
Apply with someone vouching for you
If the call went well, ask whether they’d pass your résumé to the hiring manager. Send your résumé link, apply that day, and let them know.
- 5
Bring proof to the interview
One page of before-and-after numbers from projects you led: scrap, OEE, cycle time, cost. Plant managers hire on results.
This plant: Nordic Cold Chain Solutions in Reno
1 other open role at this site.
- 2nd Shift - Industrial Maintenance Technician - Reno, NV · Reliability · Technician
Full description from Nordic Cold Chain SolutionsAs posted on their careers site.ShowHide
responsibilities
· Diagnose and repair mechanical, electrical, pneumatic, and applicable hydraulic faults using schematics, OEM manuals, measurements, and a logical troubleshooting process.
· Maintain packaging film tracking, registration, sealing and cutting systems, machine timing, heaters, thermocouples, temperature controls, pumps, valves, bearings, belts, chains, gearboxes, and drives.
· Troubleshoot single-phase and three-phase motor circuits, control wiring, relays, contactors, sensors, VFDs, PLC inputs and outputs, and HMI alarms. Support 480V equipment only within demonstrated qualification and company authorization.
· Maintain automated freezer handling equipment, including conveyors, tower drives, actuators, sensors, and safety interlocks. Coordinate specialized refrigeration work with qualified service providers.
· Execute scheduled inspections, lubrication, calibrations, and preventive maintenance. Identify deteriorating conditions and recommend corrective work before failures occur.
· Investigate recurring failures and verify repairs restore safe operation, product quality, and established production speeds.
· Document work orders, failure causes, corrective actions, parts usage, and labor time in the CMMS. Flag critical spare-parts shortages and support reliability improvements.
· Coach operators in approved routine equipment care and early identification of abnormal conditions.
Safety and work practices
· Apply lockout/tagout and verify isolation of applicable electrical, mechanical, pneumatic, hydraulic, gravity, and stored-energy hazards before servicing.
· Follow guarding, electrical safety, PPE, work-at-height, hot-work, and confined-space procedures where applicable. Never bypass guards or interlocks to maintain production.
· Stop and escalate work that exceeds personal qualification, requires unavailable qualified assistance, or cannot be completed safely.
· Verify guards and safety devices are restored and coordinate a controlled return to service after maintenance.
qualifications
· High school diploma or GED; demonstrated industrial production-equipment maintenance capability. Three or more years of relevant experience preferred; equivalent technical training and hands-on capability considered.
· Practical mechanical and electrical troubleshooting skills, including reading schematics and safely using appropriate diagnostic instruments.
· Experience maintaining automated manufacturing machinery, including motors, drives, sensors, and pneumatic systems.
· Ability to distinguish equipment faults from setup, material, or process problems and verify the underlying cause.
· Basic computer and CMMS skills, dependable attendance, clear communication, and effective collaboration with production teams.
· For second shift: Demonstrated ability to troubleshoot independently, manage competing breakdowns, and make sound repair-versus-escalation decisions without another maintenance technician on site.
Preferred qualifications
· Experience with VFFS or HFFS packaging equipment; Matrix, All Fill, or comparable automated packaging systems. Exact-brand experience is preferred, not required.
· Industrial electrical or controls troubleshooting, including tracing PLC inputs and outputs or reading ladder logic for diagnosis. Advanced PLC programming is not a core requirement.
· Industrial refrigeration or HVAC-R experience, particularly low-temperature production systems. These are industrial maintenance positions; HVAC-R certification is not required for selection.
· Technical diploma, industrial maintenance certificate, or relevant trade apprenticeship; experience with root-cause analysis and preventive maintenance improvement.
Work environment and physical
requirements
Work in a manufacturing environment with moving equipment, noise, and varying temperatures, including cold areas as assigned. Essential tasks may require standing, walking, bending, kneeling, climbing, and safely handling items up to 50 pounds using appropriate assistance or lifting equipment. Essential functions may be performed with reasonable accommodation. Work at heights or in confined spaces only when assigned, trained, and authorized.
1st Shift M-Th 5am - 3:30pm
Show full description ↓Show less ↑
Description
Position overview
Maintain safe, reliable production through preventive maintenance, systematic troubleshooting, and durable repairs. Support Matrix and All Fill vertical form fill seal equipment, roll stock horizontal form fill seal equipment used to manufacture brick products, and related mixing, pumping, conveying, and automated freezer handling systems.
Reports directly to the Director of Engineering, with a strong dotted line to the local Plant Manager. The Director of Engineering provides technical direction, maintenance standards, and performance oversight. Coordinate daily priorities and production support with the Plant Manager; escalate conflicting priorities promptly.
Core
