ShopFloorJobs
NS

Lead Avionics Manufacturing Engineer

Northwood Space · Los Angeles, CA

Level
Level: Manager
Team
Team: Manufacturing
Degree
Degree: Required
Experience asked
Experience asked: 5+ years
Industry
Industry: Industrial
Posted
Posted: 9 days ago

The role in 30 seconds

A management manufacturing role at Northwood Space (industrial) in Los Angeles, CA.

They ask for
5+ years · degree required
Tools it names
Root cause, SPC, FMEA, Control plans, AS9100, Validation (IQ/OQ/PQ)

Read from the posting. The full description is below.

From the plant jobs report · week of November 16, 2026

Manufacturing Engineer roles in California: typical posted base $115k–$173k.

Median of the low and high ends of 195 live postings that list pay, out of 492 manufacturing engineer openings in California, read from manufacturers' own careers sites.

California plant jobs report →Pay by team and state →What moves pay →

How this role compares

Against 491 other live manufacturing postings in California.

Base pay
Not listed in this posting

Typical $110k–$165k, from 173 postings that list pay.

Experience asked
Typical (5+ years)

Similar roles usually ask 5+ years.

Skills these teams ask for most

  • ✓ Tooling 50%
  • ✓ New product launch 43%
  • ✓ Root cause 38%
  • Automation 33%
  • Lean 28%
  • ✓ Validation (IQ/OQ/PQ) 27%

✓ = this posting asks for it too. % = share of similar postings that mention it.

Stands out: this posting asks for Control plans, AS9100, Painting / coating, which few similar roles mention. If you have it, lead with it.

It asks for 5+ years. If you're close, apply anyway: requirements are a wish list. Talk to someone doing this work there first.

At a glance

Pulled from the posting text. If it's not listed here, the posting didn't say.

How to get in at this plant

Five moves over a week or two. The first one takes ten minutes.

  1. 1

    Pick 2–3 people on the Manufacturing team at Northwood Space

    Engineers who joined in the last year or two reply the most. Use the team search on this page to find them.

  2. 2

    Send a short, curious note

    One real question about their work. No favors yet. Each person gets a different note, written for this role.

  3. 3

    Turn a reply into a short call

    Questions worth asking about this team:

    • What does a normal week look like on your team?
    • Is the work mostly new product launches or sustaining existing lines?
    • How much time do you spend on the floor versus at a desk?
    • How did you land the job? What stood out in your interviews?
  4. 4

    Apply with someone vouching for you

    If the call went well, ask whether they’d pass your résumé to the hiring manager. Send your résumé link, apply that day, and let them know.

  5. 5

    Bring proof to the interview

    One page of before-and-after numbers from projects you led: scrap, OEE, cycle time, cost. Plant managers hire on results.

Full description from Northwood SpaceAs posted on their careers site.Show

Responsibilities

  • ◆Lead the manufacturing engineering team responsible for avionics production, including SMT, post-SMT processing, board acceptance testing, thermal cycling, and electromechanical box build.
  • ◆Develop and maintain Northwood’s avionics manufacturing standards, processes, design guidelines, and best practices.
  • ◆Own the development, qualification, and continuous improvement of manufacturing processes across the avionics production flow.
  • ◆Establish process controls, acceptance criteria, workmanship standards, and manufacturing documentation required to consistently produce high-quality hardware.
  • ◆Lead the selection, implementation, qualification, and improvement of avionics manufacturing equipment and tooling.
  • ◆Partner with design engineering to improve manufacturability, testability, reliability, and production scalability of new avionics designs.
  • ◆Drive new product introduction from engineering prototypes into controlled production processes.
  • ◆Identify production risks and recurring manufacturing issues and drive them to root cause and corrective action.
  • ◆Define and track key manufacturing metrics such as yield, defect rates, rework, cycle time, and process capability.
  • ◆Develop process validation and qualification strategies for new equipment, materials, and manufacturing methods.
  • ◆Work with Quality Engineering to establish inspection, process control, traceability, and nonconformance practices appropriate for aerospace hardware.
  • ◆Mentor and develop manufacturing engineers and technicians while establishing strong engineering ownership on the production floor.

Basic

Qualifications

  • ✓Bachelor’s degree in electrical engineering, mechanical engineering, manufacturing engineering, or a related technical field.
  • ✓5+ years of experience in electronics or avionics manufacturing engineering.
  • ✓Basic understanding of SMT manufacturing processes, including stencil printing, pick-and-place, reflow, inspection, and process troubleshooting.
  • ✓Experience developing and improving manufacturing processes for PCBAs and electronic assemblies.
  • ✓Experience supporting products through multiple stages of manufacturing, from PCBA fabrication through integration into higher-level assemblies.
  • ✓Demonstrated ability to lead complex manufacturing problems from initial investigation through implementation of corrective actions.
  • ✓Experience creating manufacturing documentation, process specifications, work instructions, and production controls.
  • ✓Ability to work directly with engineering and production teams in a fast-paced hardware development and manufacturing environment.

Preferred Qualifications

  • ✓Experience leading manufacturing engineers or owning a significant electronics manufacturing area.
  • ✓Experience with aerospace, defense, automotive, medical device, or other high-reliability electronics manufacturing.
  • ✓Strong knowledge of IPC workmanship and electronics manufacturing standards.
  • ✓Experience with automated optical inspection, X-ray inspection, rework, cleaning, conformal coating, or other PCBA manufacturing processes.
  • ✓Experience developing board-level acceptance test processes and production test equipment.
  • ✓Experience with environmental screening processes such as thermal cycling.
  • ✓Experience with electromechanical assembly and avionics box build.
  • ✓Experience implementing manufacturing processes within an MES and developing production traceability systems.
  • ✓Experience with PFMEAs, control plans, statistical process control, process capability, and structured root-cause methodologies.
  • ✓Familiarity with AS9100 or similar aerospace quality management systems.
  • ✓Experience bringing electronics manufacturing processes in-house or scaling a new production operation.

qualifications

and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally p

Show full description ↓

About Northwood

Northwood is a modern space infrastructure company bringing the benefits of space to the masses through advanced communications technology. We are building a global network of phased array and parabolic ground stations that enable real-time, reliable communication for satellite missions such as national security, global connectivity, and disaster response. With a vertically integrated approach, Northwood designs, builds, and rapidly deploys scalable systems that power the next generation of space missions. If you like solving complex challenges and seeing your work deployed around the world with real impact, Northwood is the place to do it.

Role

Northwood Space is looking for a Lead Avionics Manufacturing Engineer to lead the manufacturing engineering team responsible for our avionics production processes. This role will own the manufacturing engineering strategy and execution from SMT assembly through board-level acceptance testing, environmental screening, and final box build.

You will be responsible for developing the manufacturing standards, processes, equipment, and controls required to build reliable avionics hardware at increasing production volumes. You will work closely with Electrical Engineering, Mechanical Engineering, Quality, Supply Chain, and Production to transition designs into repeatable manufacturing processes and continuously improve those processes as our products and production systems mature.

Additional Information

To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.

More Manufacturing roles nearby