Manufacturing Engineer
Aved Electronics · Nevada
- Level
- Level: Engineer
- Team
- Team: Manufacturing
- Degree
- Degree: Required
- Experience asked
- Experience asked: 3+ years
- Industry
- Industry: Industrial
- Posted
- Posted: Recently
The role in 30 seconds
An engineer-level manufacturing role at Aved Electronics (industrial) in Nevada. Specify, design, procure, and implement manufacturing equipment, tooling, fixtures, and workstations.
- They ask for
- 3+ years · degree required
- Tools it names
- Lean, Six Sigma, OEE, Root cause, Validation (IQ/OQ/PQ), PLC
Read from the posting. The full description is below.
From the plant jobs report · week of November 16, 2026
Manufacturing Engineer roles in the US: typical posted base $96k–$145k.
Median of the low and high ends of 935 live postings that list pay, out of 2672 manufacturing engineer openings in the US, read from manufacturers' own careers sites.
Nevada plant jobs report →Pay by team and state →What moves pay →
How this role compares
Against 13 other live manufacturing postings in Nevada.
- Experience asked
- Typical (3+ years)
Similar roles usually ask 3+ years.
Skills these teams ask for most
- ✓ Tooling 57%
- ✓ Root cause 43%
- ✓ PLC 43%
- ✓ Automation 43%
- ✓ OEE 36%
- SolidWorks 36%
✓ = this posting asks for it too. % = share of similar postings that mention it.
Stands out: this posting asks for Time studies, which few similar roles mention. If you have it, lead with it.
At a glance
Pulled from the posting text. If it's not listed here, the posting didn't say.
How to get in at this plant
Five moves over a week or two. The first one takes ten minutes.
- 1
Pick 2–3 people on the Manufacturing team at Aved Electronics
Engineers who joined in the last year or two reply the most. Use the team search on this page to find them.
- 2
Send a short, curious note
One real question about their work. No favors yet. Each person gets a different note, written for this role.
- 3
Turn a reply into a short call
Questions worth asking about this team:
- What does a normal week look like on your team?
- Is the work mostly new product launches or sustaining existing lines?
- How much time do you spend on the floor versus at a desk?
- How did you land the job? What stood out in your interviews?
- 4
Apply with someone vouching for you
If the call went well, ask whether they’d pass your résumé to the hiring manager. Send your résumé link, apply that day, and let them know.
- 5
Bring proof to the interview
One page of before-and-after numbers from projects you led: scrap, OEE, cycle time, cost. Plant managers hire on results.
Full description from Aved ElectronicsAs posted on their careers site.ShowHide
Position Summary
The Manufacturing Engineer is responsible for developing, implementing, and continuously improving manufacturing processes to enhance safety, quality, productivity, and cost performance. This role works closely with Production, Quality, Maintenance, Supply Chain, and Engineering teams to optimize operations, support new product introductions, troubleshoot manufacturing issues, and drive continuous improvement initiatives throughout the plant.
Required Qualifications
- ✓Bachelor's degree in Manufacturing Engineering, Mechanical Engineering, Industrial Engineering, or a related technical field.
- ✓3+ years of manufacturing engineering experience in a production environment.
- ✓Experience with Solid Works software and manufacturing process design.
- ✓Strong knowledge of manufacturing processes, equipment, and production systems.
- ✓Proficiency with Microsoft Office applications.
- ✓Strong analytical, problem-solving, and project management skills.
- ✓Excellent communication and teamwork abilities.
Preferred Qualifications
- ✓Experience with Lean Manufacturing principles and continuous improvement methodologies.
- ✓Knowledge of automation systems, industrial controls, and process optimization.
- ✓Hands-on experience with PLC programming, troubleshooting, and commissioning.
- ✓Experience with Allen-Bradley (Rockwell), Siemens, Mitsubishi, Omron, or similar PLC platforms.
- ✓Working knowledge of HMI development and SCADA systems.
- ✓Experience with industrial robots, robotic cells, and automated manufacturing equipment.
- ✓Programming and troubleshooting experience with KUKA or similar robotic systems.
- ✓Familiarity with robotic vision systems, end-of-arm tooling (EOAT), and robotic integration projects.
- ✓Experience supporting automation projects from concept through implementation and validation.
- ✓Knowledge of industrial communication protocols such as Ethernet/IP, Profinet, DeviceNet, Modbus, and OPC-UA.
Requirements
- ✓Ability to work in a manufacturing environment.
- ✓Frequent walking, standing, and occasional lifting up to 50 pounds.
- ✓Ability to access production equipment and manufacturing areas as required.
Show full description ↓Show less ↑
If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process.
Manufacturing Engineer
Full Time Salary Henderson USA - Lake Mead, Henderson, NV, US
2 days ago Requisition ID: 1245
Process Improvement
- •Analyze manufacturing processes and identify opportunities to improve efficiency, reduce waste, and increase throughput.
- •Develop and implement process improvements using Lean Manufacturing, Six Sigma, and continuous improvement methodologies.
- •Monitor key performance indicators (KPIs) and recommend corrective actions to achieve operational goals.
- •Conduct time studies, workflow analyses, and capacity assessments.
Manufacturing Support
- •Provide day-to-day engineering support for production operations.
- •Investigate process deviations, equipment performance issues, and product quality concerns.
- •Develop and maintain process documentation, standard work instructions, and operating procedures.
- •Support root cause analysis and corrective action activities.
Equipment and Tooling
- •Specify, design, procure, and implement manufacturing equipment, tooling, fixtures, and workstations.
- •Improve equipment reliability and overall equipment effectiveness (OEE).
- •Support installation, commissioning, validation, and startup of new equipment.
Quality and Compliance
- •Partner with Quality teams to improve product quality and reduce defects.
- •Ensure manufacturing processes comply with company standards, customer requirements, and regulatory guidelines.
- •Participate in audits and support corrective and preventive action initiatives.
Project Management
- •Lead or participate in capital improvement and cost-reduction projects.
- •Manage project timelines, budgets, and deliverables.
- •Coordinate activities with vendors, contractors, and cross-functional teams.
New Product Introduction (NPI)
- •Support design reviews to ensure manufacturability.
- •Develop manufacturing processes for new products and product changes.
- •Establish process parameters, tooling requirements, and production standards.
Safety
- •Promote a culture of safety and continuous improvement.
- •Identify and mitigate safety risks within manufacturing processes.
- •Ensure compliance with all company safety policies and procedures.
Key Competencies
- •Safety Focus
- •Continuous Improvement Mindset
- •Root Cause Analysis
- •Project Management
- •Data Analysis
- •Process Optimization
- •Problem Solving
- •Leadership and Influence
- •Cross-Functional Collaboration
- •Technical Communication
Physical
