ShopFloorJobs
WG

Senior CNC Programmer- IV

WCL Group · Greenville, SC

Level
Level: Technician
Team
Team: Manufacturing
Experience asked
Experience asked: 1+ years
Industry
Industry: Industrial
Posted
Posted: 18 days ago
Apply on WCL Group ↗

The role in 30 seconds

A technician-level manufacturing role at WCL Group (industrial) in Greenville, SC. (Manufacturing Engineer) and provide operator training during new / rebuilt machine startup and / or process improvements.

They ask for
1+ years
Tools it names
Validation (IQ/OQ/PQ), Robotics, CNC, Machining, Tooling, CATIA / NX

Read from the posting. The full description is below.

From the plant jobs report · week of November 16, 2026

Manufacturing Technician roles in the US: typical posted base $59k–$91k.

Median of the low and high ends of 97 live postings that list pay, out of 1432 manufacturing technician openings in the US, read from manufacturers' own careers sites.

South Carolina plant jobs report →Pay by team and state →What moves pay →

How this role compares

Against 47 other live manufacturing postings in South Carolina.

Experience asked
Typical (1+ years)

Similar roles usually ask 1+ years.

Skills these teams ask for most

  • Team leadership 63%
  • ✓ Tooling 31%
  • Lean 27%

✓ = this posting asks for it too. % = share of similar postings that mention it.

Stands out: this posting asks for Validation (IQ/OQ/PQ), Machining, CATIA / NX, which few similar roles mention. If you have it, lead with it.

It asks for 1+ years. If you're close, apply anyway: requirements are a wish list. Talk to someone doing this work there first.

At a glance

Pulled from the posting text. If it's not listed here, the posting didn't say.

How to get in at this plant

Five moves over a week or two. The first one takes ten minutes.

  1. 1

    Pick 2–3 people on the Manufacturing team at WCL Group

    Engineers who joined in the last year or two reply the most. Use the team search on this page to find them.

  2. 2

    Send a short, curious note

    One real question about their work. No favors yet. Each person gets a different note, written for this role.

  3. 3

    Turn a reply into a short call

    Questions worth asking about this team:

    • What does a normal week look like on your team?
    • Is the work mostly new product launches or sustaining existing lines?
    • How much time do you spend on the floor versus at a desk?
    • How did you land the job? What stood out in your interviews?
  4. 4

    Apply with someone vouching for you

    If the call went well, ask whether they’d pass your résumé to the hiring manager. Send your résumé link, apply that day, and let them know.

  5. 5

    Bring proof to the interview

    One page of before-and-after numbers from projects you led: scrap, OEE, cycle time, cost. Plant managers hire on results.

Full description from WCL GroupAs posted on their careers site.Show

Responsibilities

Program, process development, and shop support for one or more of the following: Large VTL up to 2.5m Large VBM up to 2.5m Large head-head Gantry 5-axis Large vertical multi-purpose turn/grind Generate and maintain CNC programs utilizing NX-CAM or other software. This could include multi-axis milling, turning, grinding and/or EDM. Verify new CNC programs prior to release on the shop floor utilizing Vericut. Incorporate on-machine probing using Renishaw cycles for part and process validation (including error trapping) Create programs following standards and qualified machining parameters Provide CNC related support to M.E. (Manufacturing Engineer) and provide operator training during new / rebuilt machine startup and / or process improvements. Provide daily operator support in the form of CNC programming and troubleshooting support to the shop floor. Support and implement tooling & fixturing

requirements

associated with CNC machine tools. Generate and support workstation instructions (methods) for CNC related issues. Initiate and lead process improvement projects to improve safety, quality, cost and delivery. Provide effective communication to appropriate team members when needed. Work effectively as an individual and in a team-based environment in a matrixed organization. Work effectively in a fast-paced environment while embracing and driving positive change inside and outside the organization when appropriate.

Required qualifications

4 years of experience with graphical based CAM System CNC Programming. Siemens NX CAM experience preferred and will be given priority. CAM Mastery: Demonstrated experience (4 years min) offline CAM programming 4 and 5-axis continuous milling, large VTLs, or multi-axis grinding systems using graphical CAM software (Siemens NX strongly preferred and will be given priority). Material & Control Knowledge: Experience machining high-temperature alloys (Inconel, Rene, Hastelloy, Waspaloy) or heavy structural parts, along with familiarity with modern controls (Siemens Sinumerik, Fanuc, Okuma, or Haas). Experience with on machine probing including Renishaw macros Quality & Safety Mindset: A pride in craftsmanship that prioritizes method setup, process stability, and safety over rushed code. 2+ Years experience with high level machine controls tool controls including writing and using sub-routine, macro variables, boolean logic and closed loop machining Significant "hands-on" background as a machinist, with the ability to personally setup and prove out complex first-piece programs. A track record of managing tight tolerances on large-format equipment (VTLs/VBMs/etc up to 2.5m) where part deflection, work hardening, and thermal stability are critical factors Strong problem solving and organization skills, with above average shop math skills in geometry and trigonometry. Demonstrated proficiency interpreting drawing requirements. Ability to multi-task and productively manage multiple projects concurrently.

Show full description ↓

CLIENT HIGHLIGHT The client you’ll be supporting is a Fortune 500 global leader in energy technology, focused on helping the world produce cleaner, more reliable power. Their teams design and improve the systems that keep homes, businesses, and communities running, from gas and wind turbines to the electrical grids that connect them. This is a chance to be part of a company that’s driving innovation, supporting sustainability, and shaping the future of energy. LOCATION Greenville, SC 29615 COMPENSATION $52-$62 per hour. Full benefits can be offered. SCHEDULE Monday- Friday (40 hours per week) *2nd shift only* CONTRACT TERM 1 year with high likelihood of extension or conversion to full time employee. POSITION OVERVIEW – Senior CNC Programmer This position is for CNC programming and shop support / development. We are specifically looking for VTL, VBM, 5-axis mill (3+2 & 5-simultaneous) programmers.

More Manufacturing roles nearby