ShopFloorJobs
RS

Maintenance Control Technician

Ross Stores · Sophia, NC

Level
Level: Technician
Team
Team: Controls
Industry
Industry: Industrial
Posted
Posted: 17 days ago
Apply on Ross Stores ↗

The role in 30 seconds

A technician-level controls role at Ross Stores (industrial) in Sophia, NC. It is not intended to be a comprehensive or all-inclusive listing of duties and responsibilities.

Tools it names
PLC, Robotics, Automation

Read from the posting. The full description is below.

From the plant jobs report · week of November 16, 2026

Maintenance Technician roles in North Carolina: typical posted base $71k–$97k.

Median of the low and high ends of 8 live postings that list pay, out of 156 maintenance technician openings in North Carolina, read from manufacturers' own careers sites.

North Carolina plant jobs report →Pay by team and state →What moves pay →

How this role compares

Against 18 other live controls postings in North Carolina.

Experience asked
Not stated

Similar roles usually ask 5+ years.

Skills these teams ask for most

  • ✓ PLC 68%
  • ✓ Automation 63%
  • ✓ Team leadership 53%
  • ✓ Robotics 42%
  • Root cause 37%
  • Tooling 21%

✓ = this posting asks for it too. % = share of similar postings that mention it.

At a glance

Promotion path mentionedLifts up to 50 lbs

Pulled from the posting text. If it's not listed here, the posting didn't say.

How to get in at this plant

Five moves over a week or two. The first one takes ten minutes.

  1. 1

    Pick 2–3 people on the Controls team at Ross Stores

    Engineers who joined in the last year or two reply the most. Use the team search on this page to find them.

  2. 2

    Send a short, curious note

    One real question about their work. No favors yet. Each person gets a different note, written for this role.

  3. 3

    Turn a reply into a short call

    Questions worth asking about this team:

    • What does a normal week look like on your team?
    • How did you land the job? What stood out in your interviews?
  4. 4

    Apply with someone vouching for you

    If the call went well, ask whether they’d pass your résumé to the hiring manager. Send your résumé link, apply that day, and let them know.

  5. 5

    Bring proof to the interview

    One page of before-and-after numbers from projects you led: scrap, OEE, cycle time, cost. Plant managers hire on results.

Full description from Ross StoresAs posted on their careers site.Show

As part of our team, you will experience

  • ✓Success . Our winning team pursues excellence while learning and evolving
  • ✓Career growth . We develop industry leading talent because Ross grows when our people grow
  • ✓Teamwork . We work together to solve the hard problems and find the right solution
  • ✓Our commitment to Diversity, Equality & Inclusion, and our community. We celebrate the backgrounds, identities, and ideas of those who work and shop with us because our differences make us stronger. We strive to be a positive force in our community.

Our Corporate headquarters are in Dublin, CA, we have 3 buying offices in key markets in New York City, Los Angeles, and Boston, and 8 distribution centers nationwide. With 2025 revenues of $22.8 billion, we are a Fortune 500 company who is committed to providing an inclusive work environment with continuous learning opportunities and development for our teams.

Essential functions

  • ◆Exhibit the ability to troubleshoot and perform basic design of PLC logic, operator interface terminal, energy management systems and electrical installations.
  • ◆Statistically interpret and improve automated system’s performance parameters, at macro/micro level.
  • ◆Perform Preventive Maintenance for controls and systematize electrical/control parts inventory.
  • ◆Coordinate with vendors, installation of electrical or controls; as instructed.
  • ◆Maintain accurate record keeping such as: work orders, timesheets, parts requests.
  • ◆Maintain parts procedure and inventory control
  • ◆Will assist other members of maintenance department as assigned

& special skills required

  • ✓Functional familiarity with HVAC principles for Building Management Systems (BMS).
  • ✓Knowledgeable in the assembly of electrical, pneumatic, and hydraulic systems, robotic operation and vision systems and the ability to assemble new equipment; and modify existing manufacturing equipment.
  • ✓Connect, test, and maintain electrical systems for a variety of purposes, including climate control, security and communications.
  • ✓Understanding of 3 phase distribution and 3 phase power transmission system.
  • ✓Firm grasp on testing 3 phase related equipment 480v and below.
  • ✓Energy management (BMS) software and hardware familiarity.
  • ✓Clear understanding of power systems grounding and safe grounding practices.
  • ✓Familiarity with Motor Control Center (MCC)
  • ✓Understanding of Arc Flash Hazard.
  • ✓Familiarity: electrical construction and configuration (hardware/software) of basic electrical components used in automation systems: Solenoids – Beacons – Proximity Switches, etc.
  • ✓Understanding of PLC Hardware: Pico Controllers, MicroLogix 1500, CompactLogix, ControlLogix and SLC 500 systems. 1794 Flex I/O system.
  • ✓Familiarity would be a plus with: WAGO-I/O System, Siemens Simatic Step 7, Controller Area Network (CAN), B&R X67 I/O system.
  • ✓Must be flexible to work any shift and/or weekends as scheduled.
  • ✓Exhibit the ability to work independently, safely and with limited supervision.
  • ✓Must place the utmost importance on working safely, and maintain a safe work environment for yourself and others, at all times

Requirements

Vision: ability to see information in print and/or electronically

Job requires ability to work in a warehouse environment, on a concrete floor all day

Requires continuous, standing, walking, hearing, pushing, and pulling

Consistent timeliness and regular attendance is necessary

Frequently reaching, bending, stooping, talking, hearing (audio equipment), handling objects with hands and lifting to 50 lbs

This role requires full-time in-office presence, including to engage in in-person team interaction, meetings and collaboration, client support, mentoring, coaching, and/or feedback

Responsibilities

None

responsibilities

of the job and position. It is not intended to be a comprehensive or all-inclusive listing of duties and responsibilities. Contents are subject to change at management’s discretion.

Show full description ↓

Maintenance Control Technician | Sophia, NC | Ross Stores

Shine with Ross this season – join

our Stores team today!

Now hiring for our summer grand openings!

Skip to content

Say yes to a great career with Ross Dress for Less and dd’s Discounts

Navigation Menu

Search Jobs

Close Search

Keyword

City, State or Zip

Search Jobs

See all jobs

Maintenance Control Technician

Share by Email

Share on LinkedIn

Share on X

Share on Facebook

  • •Careers
  • •Search Jobs
  • •Maintenance Control Technician

Req. Number

12484

Postal Code

27350

Our values start with our people, join a team that values you!

Bring your talents to Ross, our leading off-price retail chain with over 2,200 stores, and a strong track record of success and growth. Our focus has always been bringing our customers a constant stream of high-quality brands and on-trend merchandise at extraordinary savings. All while providing a fun and exciting treasure hunt experience.

General purpose

To troubleshoot, maintain and enhance the accuracy, reliability and system control’s data credibility of PLC and PC based automation systems. Effectively utilize building management system’s interface tools and equipment to achieve efficiency. Communicate and partner with internal engineering staff and equipment vendors.

Competencies

Technical / Functional Competence

Adaptability

Commitment

Analysis & Judgment

Flexibility

Quality of Work

More Controls roles in North Carolina